PANHANS 245

PANHANS 245

Kondisi: bekas, Tahun pembuatan: 2002, Mesin bekas Tahun pembuatan: 2002 Fitur dan data teknis: Kjdpfx Ahoy R Harshelt - dengan spindle yang dapat diputar - dimensi: 260x180x130 cm data lebih lanjut akan menyusul Ketersediaan: segera Lokasi: 63934 Röllbach

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Stair Milling Machine SELECT 20800 for mortising treads and risers into stair stringers and posts. The machine is equipped with stops for tread length, tread thickness, riser length, riser thickness, and nosing projection. Both a tread and a riser can be milled in a single clamping operation in approximately 1 minute. Clamping the workpiece takes just one second. Kledpjwut Abefx Ahhjt This machine is the ideal solution for professional staircase manufacturers. Voltage: 3-phase, 400 V Maximum clamping height: 300 mm.

Kondisi: baik (bekas), Dijual mesin frais Panhans bekas tipe-245 dengan 8 kecepatan spindel. Mesin telah diperiksa dan direkondisi oleh staf teknis kami dan berada dalam kondisi baik. Data teknis: - unit miring ganda - sudut kemiringan -45° hingga +45° - penyesuaian ketinggian dan kemiringan elektrik - panel kontrol atas kepala - 8 kecepatan frais - sakelar arah putaran - daya motor 11 kW / 15 HP - tahun pembuatan 2002 Mesin berada di A-5431 Kuchl dan dapat dilihat kapan saja selama jam kerja kami. Penjualan dapat berubah sewaktu-waktu! Ksdpfx Ahoy Nncfshslt Istilah terkait: mesin frais, mesin milling, proses milling Referensi: R-S1632

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dokumentasi / manual, 1 Kodpfxsy Rlnbe Ahhslt

Kondisi: bekas, Cut-off saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Slot Mortising Machine FZS-2 Electronics with infinitely variable slotting spindles and automatic roller table ----- Cut-off saw ----- Spindle arrangement: top Three-phase motor: 3 kW Spindle diameter: 30 mm Speed: 2,800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 slotting spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4,200 rpm Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both slotting spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Kedpfewgwlksx Ahhslt Mitre table ----- * Swivel range: +/- 65° * Automatically changing counter support (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter support always in cutting plane for any angle setting Special equipment ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2,500 mm Extraction port diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for cut-off saw ----- Price for the above machine on request! ----- Photos show the same model. Original images not yet available. (Technical data as provided by manufacturer – no guarantee!) All prices net, plus legal VAT.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle (not exchangeable): 30 mm Clamping height: 140 mm Height adjustment: 140 mm Extraction ports: 2 x ø 120 mm Speed: 3000 / 4500 / 6000 / 9000 rpm Kedpfx Ajgz Sifjhholt Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with double-sided swivelling, fixed milling spindle for a swivelling range from -5° to +45.5° Operation via handwheel at the machine base Height and tilt adjustment via handwheels Analog dial gauges for height and tilt adjustment 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning system Electronic speed display Push buttons for spindle start and stop Left and right rotation Quick-clamping device for cutter Finely planed cast iron table Controls easily visible and accessible at the lower machine body Fencing system 215 overall adjustment via handwheel incl. multiplex fence plates Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressing device GAMMA V 1629 Curved fence 1639 Tapoa CE certified GS certified

Kondisi: baru, Tahun pembuatan: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Robust German engineering Table spindle moulder with a fixed, single-sided tilting spindle for a swiveling range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed displays 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning system Push-buttons for spindle start and stop Left- and right-hand rotation Quick-change cutter clamping system Finely planed grey cast iron table with rigid frame support Control panel positioned below on rigid frame support Model 216 moulder fence: complete adjustment via handwheel and LCD display, including cast iron fence plates and aluminium anti-splinter bars Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved work fence 1639 Tapoa Milling spindle 30 mm, non-interchangeable CE compliant GS tested Table dimensions: 1100 x 760 mm Table height: 870 mm Spindle (non-interchangeable): 30 mm Clamping height: 140 mm Kljdpfx Aor Ig H Tohhet Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight approx. 800 kg Equipment: Control panel (upper position) Tilting ±45 degrees Motor 7.5 kW Centrex Extendable frame support Location: ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Load capacity 500 kg Kedpfx Ahoq Sc Auoholt Number of suction pads: 6 Diameter of suction pads: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing steel construction, painted in RAL 2000, with low dead weight. Consisting of: - 1x Galvanised longitudinal beam, length 2,400 mm - 3x Galvanised crossbeams, length 1,000 mm - 6x Spring-mounted, articulated, and adjustable suction pad holders - 6x Suction pads Ø 215 mm; in case of wear, seals can be inexpensively replaced without tools, separate from their metal carrier - 6x Ball valves to individually shut off suction pads, allowing smaller formats to be lifted without having to move the pads or beams - 1x Spiral connection cable, small coil: * Extension length 3,500 mm, designed as extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and no neutral conductor is present) - Operating handle extendable up to 1,000 mm from the centre of the beam - Stable sheet metal pocket for your crane controls included, at no extra charge - Operation "Suction / Release" via hand slide valve: Wear-free and very robust hand slide valve ensures secure suction and release following actuation of the release button (double release according to EN 13155) - Control and safety device for vacuum lifter: * Sturdy control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum accumulator tank with safety non-return valve * Double release operation when unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easily understood documentation Guarantee against material and manufacturing defects for one year under single-shift operation (excluding wear parts). Initial safety inspection UVV 18, VBG 9a, with CE declaration of conformity – according to EN 13155 - Packaging for truck transport.

Kondisi: baru, Tahun pembuatan: 2024, en-technical-translation-2024-06-16 Kljdpsx N Dhdjfx Ahhst

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Kedpefpb Nmefx Ahhelt Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: bekas, Tahun pembuatan: 2024, New machine – Special Price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The illustration shows the system. HAND GUARD is based on the early detection of dangerous situations and thus protects the user from injury, functioning in all environments. The camera-monitored system first gives the operator a visual warning to indicate a potential hazard. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials such as wood, metal, and plastics. • Non-contact and injury-free operation • Quick commissioning • 100% damage-free • Works with blind (concealed) cuts • Permanent functionality, no need to deactivate • Max. 500 mm saw blade diameter in standard version fully retractable under a single-sided tilting saw unit. Tilting range: 0 - 46°, equipped with quick-change system for the main saw blade. Motorized height and tilt adjustment and a maximum saw blade protrusion of 179 mm (removal of the scoring unit might be required in some cases). Additionally, the control panel is at eye level, allowing you to adjust saw blade height and tilt, plus depending on the control package, access speed and other functions. The new, clear industrial design underlines the exceptional status of the Altendorf brand: This sliding table saw combines characteristic design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precise running. It can be infinitely locked in any position. The large double rollers keep the upper carriage precisely aligned with the lower carriage along the respective guide rods, regardless of decades of heavy use or contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. In addition, a front support roller with a width of 300 mm aids in cutting long workpieces on the parallel fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on parallel and angle fences during saw unit tilt • Infinitely variable fine control of axes via +/- buttons • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall of last input (back function) • Conversion from pointed to blunt angle dimension on parallel and miter fences • Scribing cut function with automatic determination of missing angles or dimensions • Extended tool management for up to 100 tools • Storage of scoring position (3-axis scorer) • Storage of base blade thickness and cutting width of main tool • Storage of main tool speed Additional functions: • Grooving: automatic stepwise positioning of parallel fence • Chain dimension function: repeated cuts with identical spacing on the parallel fence • Oversize angle cuts • Calculator function with result transfer to axes • Geometric shapes, determination of missing angles or dimensions • Compound angles, determination of missing angles or dimensions • Storage for up to 9,999 cutting programs • Standard ready for remote maintenance • Template holder located directly next to the touchscreen Kedpfxjyyap Ej Ahhelt Included accessories in Edition Single Flex: • Double roller carriage with a carriage length of 3,000 mm • Vario drive 5.5 kW (7.5 HP) VAR