Alat geser

Peddinghaus für U-Stahl 30/60 mm

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Gbedsfxyhfopfx Adtsg Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 0441057, Offer 23300 Technical Specifications: Gedpfx Adepug D Ejtebg - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Adjustable-angle support vise: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required floor space (approx.): W 800 x H 1000 x D 1300 mm - Weight (approx.): 250 kg

Kondisi: baik (bekas), Tahun pembuatan: 1969, Pneumatic gluing press, max. pressure 10 bar, heated gluing beam, bonding area 550 x 40 mm, infinitely variable temperature control for both upper and lower gluing beam from 0 - 300 °C, stepless adjustment of bonding hold time, drive power: 5 kW, 380 Volt-50 Hz, two-hand operation by SIEMENS. Pressure build-up via toggle lever, max. opening stroke approx. 30 mm. Gbjdpsd Dxqbjfx Adtog

Kondisi: baik (bekas), Plasma cutting unit, plasma cutter - Equipment: without torch package - Cooling: water-cooled - Maximum cutting current: 70 A - Mains voltage: 3x400V Godpfob A Innex Adtsbg

Kondisi: baik (bekas), Tahun pembuatan: 1995, 24315 Gbodot Stfhjpfx Adtsg Technical Data: - Abrasive belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via handwheels - Abrasive belt speed: 30 m/sec - Contact wheel / grinding roller: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm, 28 + 33 + 36 + 48 + 60 + 68 mm

Kondisi: bekas, Glaser flat steel bender HAWE HC4L/3.0 hydraulic see pictures Gbedpfsu Da Afox Adteg

Kondisi: baik (bekas), Thread cutting machine with steel jaws, thread cutting head - Chuck diameter: 190 mm - Size: 1/2 - 2 inch - Weight: 130 kg Gbodpob A Ncujfx Adtjg

Kondisi: siap digunakan (bekas), Mesin Elgo CNC, sangat mudah dan ramah pengguna Kapasitas pipa maks: diameter 76 mm x 4 mm tebal Pipa kotak maks: 70 x 70 mm Radius maks: 600 mm Sudut tekuk: 180° Mata alat standar 3D Mata alat khusus sesuai permintaan Panjang: 1200 mm Gedexpghqspfx Adtjbg Lebar: 800 mm Tinggi: 1300 mm

Kondisi: baru, Saw blade diameter 350 mm Cutting capacity at 90°: round 100 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: flat 100 x 195 mm Cutting capacity at 45°: round 100 mm Cutting capacity at 45°: square 100 mm Cutting capacity at 45°: rectangular 100 x 135 mm Saw blade speed 2800 rpm Total power requirement 1.5 kW Machine weight approx. 250 kg Dimensions (L x W x H) 0.7 x 0.7 x 1.4 m ATTENTION: SPECIAL OFFER PRICE - Mitre left/right 45° - Fixed locking points at main mitre angles - Pneumatic double clamping device - Safety motor brake Godsupxaxopfx Adtsbg - Complete with mist spray unit and machine base

Kondisi: bekas, Druck: 250 t Gbeds Du Trspfx Adtog Blechlänge: 3.250 mm Neue Hydraulik- und Elektrik-Anlage