Pengumpan

PODAJNIK DO PIŁY/ STRUGARKI/ OPTYM

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. Bsdeuiy Nyopfx Am Town The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff

Kondisi: bekas, panjang total: 1.330 mm, lebar total: 1.040 mm, tinggi total: 1.150 mm, leergewicht-1800 Bedpfjxuf Sljx Am Tewn

Kondisi: bekas, jarak tempuh: 209.000 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 10/2013, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, jumlah tempat duduk: 3, panjang ruang muatan: 4.200 mm, lebar ruang muat: 2.050 mm, tinggi ruang muatan: 2.050 mm, Perlengkapan: ABS, kunci sentral,

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Bodouz If Nopfx Am Tjwn Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Set rol untuk mesin pembengkok profil, mesin pembengkok cincin 3-rol HERKULES WETZLAR Rol ini cocok untuk mesin pembengkok profil HERKULES WETZLAR tipe BO 238 N Diameter poros: 60 mm dengan alur pasak 18 mm 2 buah rol, set rol no.1, diameter rol = 110 mm, lebar rol = 180 mm 2 buah rol, set rol no.2, diameter rol = 160 mm, lebar rol = 40 mm Bwjdjglaq Iepfx Am Ten 3 buah rol, set rol no.3, diameter rol = 150 mm, untuk diameter pipa Ø 33 mm, lebar rol 87 / 115 mm - Set rol no. 3 dengan cincin adaptor dari Ø 93 ke Ø 60 mm tanpa alur pasak Mesin memiliki 2 rol penggerak Berat total semua rol 57 kg kondisi baik

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Rotary Welding Table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Bwedpsc Ug Tlefx Am Tsn Tilt range: stepless adjustment via hand-crank gear motor, 0 - 90° Rotation speed: 0.3 to 2.5 rpm Including foot remote control Surcharge: Quick-release chuck Diameter: 300 mm, €450

Kondisi: bekas, Tahun pembuatan: 2018, hecht-es-350-glasleistensaege-de Bwjdovpr N Ropfx Am Ton

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories Bodpfsw D Aq Tex Am Tjwn

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Max. bar diameter 65 mm Max. bar length 3000 mm Bodpfx Amsin Hkmj Tswn

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 3253-80, Offer 22045 Technical data (approx.): Bodpfxektg Dhj Am Tswn - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Table through hole: 165 x 125 mm - Max. daylight (installation height): 220 mm - Ram area: 240 x 150 mm - Ram bore (taper hole): 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 - 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required floor space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg