Mesin deburring

Q-Fin Quality Finishing Solutions DS1200 - MAG

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Codpfsd Ev Upox Aa Tspw Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Gebrauchte Haeger 412 Einpressmaschine Blech-Einlets, Bolzen & Muttern – Selbstsichernd zu verkaufen. Inklusive Werkzeug und J-förmigem Unterwerkzeug. Cpedswbhipepfx Aa Tow

Kondisi: bekas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding up to polishing of metal surfaces. Cpedpenah Tasfx Aa Tsw This machine is suitable for heavy-duty applications. With a fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optionally with magnetic holding system By using abrasive belts with a length of 3250 mm, you achieve a consistently smooth surface and reduce consumable costs, as these belts offer a longer service life. The modular design of these machines allows for the optimal configuration according to the customer’s processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing applications. Please contact us for further information and images via mail(at) or *

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. Codpfx Ajd Ixadea Topw The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Codpet Hw Iiefx Aa Topw Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baru, Tahun pembuatan: 2025, -TFON Kantenverrundungs- und Oberflächenreinigungssystem Cedpfx Aohq A T Uoa Tjpw -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl. -Arbeitsdickenbereich: Verarbeitet Materialstärken von 0 bis 120 mm. -Kantenverrundung: Erzeugt eine Radius-2-Kantenverrundung für glatte, sichere Kanten, die sowohl das Erscheinungsbild als auch die Funktionalität des Werkstücks verbessern. -Präzisionssteuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und gleichbleibende Steuerung während des gesamten Prozesses. -Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Anwendungen, sodass verschiedene Aufgaben gleichzeitig oder nacheinander ausgeführt werden können. -Tischoptionen: Verfügbare Arbeitstischgrößen: 650 mm, 1000 mm oder 1300 mm zur Anpassung an spezifische Produktionsanforderungen. -Tischtypen: Flexible Konfigurationen: magnetische, Vakuum- oder Magnet-Vakuum-Tische sorgen für sicheren Halt verschiedener Materialien und Teilegrößen. -Plasma- und Sauerstofftechnologie: Setzt fortschrittliche Plasma- und Sauerstofftechnik ein, um starke Grate und Schneidschlacke effektiv zu entfernen und eine saubere, glatte Oberfläche zu erzielen. -Oberflächenreinigung: Entfernt effizient Oberflächenverunreinigungen wie Rost, Oxid und Zunder, und bereitet Teile optimal für weitere Bearbeitungsschritte vor. -Kantenverrundung für Beschichtungen: Bereitet Teile optimal für Lackierung und Beschichtung vor, indem eine einheitliche und fehlerfreie Oberfläche sichergestellt wird. -Einsatzbereiche: Ideal für Stahl-Service-Center, Energie-, Bergbau-, Bau- und Automobilbranche; bietet maßgeschneiderte Lösungen für schwere Anwendungen. -Uniforme Ergebnisse: Sechs Lamellenräder arbeiten synchron und erzeugen auf jedem Werkstück gleichmäßige Radiuskanten. -Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder durch reduzierte Abnutzung und gewährleistet dauerhaft gleichbleibende Leistung.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, lebar kerja: 1.100 mm, berat keseluruhan: 1.300 kg, lebar benda kerja (maks.): 600 mm, sambungan udara terkompresi: 6 batang, ketebalan lembaran (maks.): 40 mm, jumlah pemilik sebelumnya: 1, jenis penyesuaian ketinggian: listrik, panjang meja: 3.000 mm, tinggi meja: 850 mm, lebar meja: 600 mm, masa garansi: 3 bulan, Translation into English: Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units: mm, bar Operating manual: 1x manual Cpodpfx Aaew U A Dmj Tjw Paint finish: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head version with 6 tools each, drive 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high-wear resistant version) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Stepless feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with starting switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt, drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit lock, belts replaced – Machine is fully operational and in very good technical condition. Set according to manufacturer's specifications/standards. Delivery includes a mechanical functional warranty of 3 months from delivery date.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, mold carriers: 42, mixing positions for additive mixing: 10, mixing head type: MQ, max. operating pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Full documentation is available. An on-site inspection is possible. Cedpfx Aettbd Nja Topw

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, berat keseluruhan: 22.800 kg, gaya penekanan: 250 t, CNC press brake Manufacturer: Weinbrenner Model: GP250 Cpsdpfjr Sxq Rsx Aa Tew Machine specifications: - Crowning system - Die shifting - Rear stop type 2 - Front bending aid (disassembled for transport) - DNC 900PS CNC control All documentation for the machine is available.

Tahun pembuatan: 1996, Kondisi: baik (bekas), nomor mesin/kendaraan: xxxx, High-Performance Tabletop Tapping Machines on T-Slot Plate Technical Specifications: Cpjdpfxjf Tcy Dj Aa Tow - Tapping capacity approx.: M 3 – M 16 - Speed range up to: 500 rpm - Working area (pivot radius): 2500 mm - Quick-change tool holder Size 2, Ø 31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots: 2050 x 900 mm - Table height: 910 mm - Machine vice with jaw width: 200 mm - 3-jaw chuck: 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Space requirement approx.: W 2400 x H 2000 x D 1000 mm - Weight approx.: 1100 kg