Tekan membran dan vakum

RAPHA Membrane aus Silikon und Naturkautschuk

Kondisi: bekas, Tahun pembuatan: 2004, jenis bahan bakar: gas, Load capacity: 2,500 kg Lift height: 3,050 mm Dcodpfx Asr Dg H Esnzjl Fork length: 1,200 mm Load center: 500 mm Turning radius: 2,444 mm Travel speed: 22 km/h Front track width: 1,008 mm Rear track width: 932 mm Machine weight: approx. 3.64 t Space requirements: approx. 3.8 x 1.25 x 2.25 m

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Dsdpfxeuc Idxj Anzecl Cutting system for thin panels

Kondisi: bekas, Etek stretch blow moulding machine ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles made from PET preform blanks Stretch blow moulding machine for rotary table production process Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Dcodpokucxlefx Anzel Mains connection: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Kondisi: bekas, Adhesive application Dcodpfx Aocht Nyjnzjl Glue application Adhesive dispensing - Glue application for package heights up to 300 mm using 1 applicator roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Dimter accessories

Tahun pembuatan: 2013, Kondisi: baik (bekas), Mesin Uji Universal Zwick/roll Tipe: 1488 Dimodernisasi tahun 2013 dengan perangkat lunak Daya uji maks: 200 kN Dcodpfoxw N Uvex Anzjl Kebutuhan ruang: Lebar: 2.000 mm Tinggi: 2.100 mm Kedalaman: 800 mm Berat: sekitar 1.000 kg.

Tahun pembuatan: 1988, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 3284, • Protective panels surrounding the machine. Minimum material thickness: 0.65 mm Djdpfxjhbu E Ho Anzecl Maximum material thickness: 2 mm Technical data: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth, negative/positive: 6/20 mm (22 mm negative available on request) Top heater max.: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Air consumption (depending on production): max. 1,250 l/min Maximum water flow rate: 1.0 m3/h COMPACT AND ROBUST – designed for high continuous output and user-friendly operation. Ergonomically optimized (e.g. product removal height 1,300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, i.e. optimum material utilization for both rectangular and round lids (heater replacement is straightforward). PRECISION – Accurate forming table guidance via guide columns with linear ball bearings. The reliable guarantee for precision. OPTIMUM CUTTING ACCURACY AT HIGH OUTPUT Cam-controlled functional processes ensure maximum repeat accuracy.

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), Prasa o wymiarach roboczych 4,5 m x 1,9 m Dcsdpfx Ajlzi S Nsnzel

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Dsdpol Rix Ejfx Anzscl Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Tahun pembuatan: 2001, Kondisi: bekas, • Size of heating plate (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 • Loading side (mm): 1500 Djdekt N Huopfx Anzjcl

Tahun pembuatan: 2000, Kondisi: Pembawa suku cadang rusak (bekas), Yaskawa Motoman UP130 6-axis robot with Motoman Xrc controller Robot: Motoman YR-UP130-A00 Teaching pendant: Yasnac Mrc Year of manufacture: 2000 (June) Robot controllers: Motoman Xrc ERCS UP130-RE00 Teaching pendant: Yasnac Mrc Year of manufacture: 2001 Dedsfhkfijpfx Anzscl - Number of axes: 6 - Payload capacity: 130 kg - Arm reach: 2650 mm - Repeatability: 0.2 mm - Robot weight: 1300 kg - Controller: Xrc - Cables, plugs, connectors included Structure: Vertically articulated type Axis types: S-Axis 130°/s (2.27 rad/s) L-Axis 130°/s (2.27 rad/s) U-Axis 130°/s (2.27 rad/s) R-Axis 215°/s (3.75 rad/s) B-Axis 180°/s (3.14 rad/s) T-Axis 300°/s (5.24 rad/s) Range of motion: S-Axis 180° L-Axis +76°/-60° U-Axis +240°/-130° R-Axis 360° B-Axis 130° T-Axis 360° Purchase, acquisition, and asset management of industrial equipment and machinery. Wide range of used machinery and industrial equipment available.