Mesin bubut vertikal CNC RASOMA DZS 250-

RASOMA DZS 250-2

Kondisi: bekas, Tahun pembuatan: 2010, Technical details: Swing diameter: 260 mm Control: 840 D SIEMENS Speed: 3,500 rpm Spindle motor: 36 / 28 kW Chuck diameter: 260 mm Travel - X axis: 900 mm Travel - Z axis: 400 mm Turret: 12 positions Tool holder: VDI 40 Nsdetpq Urspfx Abgoli Rapid traverse in X and Z direction: 100 / 30 m/min Space requirements approx.: 5.3 x 2.4 x 3.31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks D 315 mm,

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Machine weight approx.: 8 t Space requirement approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm Nedoizlh Hepfx Abgeli X-travel: 170 mm Z-travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Pick-up machine *

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 9.965 h, - BEKAS - PUSAT PEMESINAN VERTIKAL 3-SUMBU DENGAN ROTO-PALLET PERJALANAN SUMBU X: 560 mm PERJALANAN SUMBU Y: 400 mm PERJALANAN SUMBU Z: 570 mm JARAK HIDUNG SPINDEL- MEJA: 210 - 780 mm GERAK CEPAT X-Y-Z: 40 - 40 - 32 m/menit Nlsdpfx Abeq Nqkxogji SPINDEL: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALET: 2 unit; 712X475 mm MAKS. BEBAN DIIZINKAN: 300X2 kg PENDINGIN TEKANAN TINGGI: 15 bar MAGAZIN TOOL: TIPE RANTAI; 32 POSISI DIAMETER MAKS. TOOL: 90(150) mm PANJANG MAKS. TOOL: 300 mm BERAT MAKS. TOOL: 8 kg UNIT KONTROL: FANUC 21i - MB BERAT MESIN: 7600 kg DIMENSI TOTAL: 3010 x 3450 x 3145 mm

Kondisi: baik (bekas), Tahun pembuatan: 1995, nomor mesin/kendaraan: 9518 202-5, 24361 Technical Specifications: - 3 individually motor-driven rollers with manual and controlled operation - Max. torque per roller: 1600 Nm - Lift of bending roller (X-axis): approx. 265 mm - Lower rollers laterally adjustable: 200 - 1000 mm - Shaft diameter: 105 mm - Roller diameter up to approx. 260 mm - Usable length of standard shafts: approx. 300 mm - Infinitely variable shaft speed: 1 - 22 rpm - Bending capacity, for example: - Round tube 1”: Ø 350 mm - Round tube 4”: Ø 2000 mm - Flat bar 300 x 15: Ø 600 mm - Roller drive: 400 V / 3 x 1.1 kW - Hydraulic drive: 400 V / 3 kW Nlsdpfxjt Nfv Tj Abgoi - Weight: approx. 1200 kg - Accessory weight: approx. [to be specified] kg - Required floor space: approx. W 1250 x H 1400 x D 1700 mm - Including: - PC 100 control in separate control console - Side straightening rollers adjustable horizontally and vertically - Standard bending set for flat and angle material - Roller sets for pipe (steel and plastic)

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Nlodpfx Aeia Rtdebgoi Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: bekas, Tool clamping area: 0 mm Weight: 0 t Titanium-coated solid carbide slot cutters available in the following diameters and various quantities: Nodpfx Ajd Ihcaobgjli Ø 9.7 – 11.7 – 13.7 – 15.7 – 17.7 – 19.7 – 20.5 – 21 mm Cutters up to and including 15 mm: €15 each. From 15 mm: €20 each!

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW Nsdpfsixntwjx Abgeli

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Nljdjiw Dlkopfx Abgsi Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse.

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Nedpfx Abed Nb A Njgsli Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: sangat baik (bekas), Data teknis: 2 rol dapat disesuaikan secara hidrolik 3 rol digerakkan Diameter rol: 225 mm Diameter poros: 75 mm Baja bulat: diameter 50 mm Baja kotak: 45 x 45 mm Baja datar: 200 x 20 mm Baja siku: 75 x 15 mm Kecepatan pembengkokan: 7 m/menit Daya motor: 4 kW Mesin dapat beroperasi secara horizontal atau vertikal Dimensi (Panjang x Lebar x Tinggi): sekitar 1200 x 1100 x 1200 mm Berat: sekitar 1,3 ton Nodpfx Aexgukuobgjli Penjual tidak bertanggung jawab atas kesalahan penulisan atau transmisi data. Mesin dijual sesuai dengan kondisi visual, teknis, dan tingkat keausan berdasarkan usia; mesin bekas dijual tanpa jaminan apa pun.