Tekan alat uji coba alat

Raster-Zeulenroda HP40H/K BG04

Tahun pembuatan: 1990, Kondisi: belum diuji (bekas), Pressure: 125 tons (2x63) Stepless working speed: 0-10 mm/sec Return speed: 20 mm/sec Lodpfx Aasgy Hzpjhsta Clamping width between columns: 950x550 mm Table surface from front: 950x820 mm Table surface with lateral insertion: 1220x550 mm Ram surface: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Weight: 5,500 kg Height: 2,900 mm Drive power: 18.5 kW 2 hydraulic cylinders with precision synchronous control Stepless electronic stroke limitation

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Ledpfxjhigmbo Aaheta Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t Lodpfx Aaocxxtmehota with NC control NC81, table toothed belt drive 100-25,000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety switch

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Lsdpfx Aaora Rr Eohsta Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation Ltedpjtiwgisfx Aahoa

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 100 tonnes Frame clearance (front): 1,400 mm Stroke: 250 mm Side passages: 400 mm Table: 1,250 x 1,100 mm Ram: 1,250 x 1,100 mm Stroke: 250 mm Speed: - Rapid forward: 400 mm/sec - Rapid return: 330 mm/sec - Under load: 24–43 mm/sec Power requirement: 33 kW Weight: 10,000 kg Height: 3,300 mm Ledpfxec Uwx Dj Aahsta Width: 1,700 mm Depth: 1,800 mm Table ejector force: 6 tonnes Cutting stroke damping Pressure, time and travel dependent control Two-hand operation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Press force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through openings: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram mounting surface: 2,300 x 1,100 mm Lateral passage: 740 mm Installation height: 550 mm (stroke down, adjustment up) Stroke rate: 30 - 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-way slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Visualization Beckhoff Panel • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safety devices + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamps on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Auxiliary drive motorized • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear locating disc and 3 removable guide arms at the front • Hydraulically actuated and driven pressure roller, laterally adjustable via handwheel • Coil car (stationary, decoiler moves hydraulically), lift height 770 mm with 4 guide rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground, and hard-chromed • Drive of lower straightening and feed rollers via gear transmission • Motorized adjustment of roller block via motors, adjustment accuracy 0.01 mm, values can be stored • Upper rollers openable by 100 mm • Entry feed roller pneumatically openable • Lateral strip guidance at entry with handwheel and threaded spindle • Exit roller basket and loop bridge • Loop control via ultrasonic sensor • Entry aid, hydraulically actuated, consisting of table with extendable tongue and upper bending roller Roll feeder Strip width: max. 600 mm Design features: • Rollers hardened, ground, and chromed • Drive by gear motor • Upper roller hydraulically openable • Hydraulic height adjustment • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feed • Safety fence surrounding the entire line Ltodev T Anlopfx Aahea • Decoiler and straightener on common base frame • Various spare rollers for the straightening machine The complete line can be inspected under power at the owner’s location!

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: 150069, Pressing force: 125 t Adjustable ram stroke: 30 - 120 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Distance between columns (left-right): 1,290 mm Distance between columns (side): 450 mm Table clamping area approx.: 1,250 x 800 mm Ram clamping area approx.: 1,250 x 650 mm Passage opening in table: 1,050 x 260 mm Strokes per minute: 30 - 220 min-1 Table height above floor: 1,200 mm Power requirement: 39 kW Overall height above floor approx.: 3,800 mm Dimensions LxWxH: 3,500 x 2,200 x 3,800 mm Machine weight approx.: 21.5 t Standard equipment: - Electrical overload protection - Pneumatic clutch - 2 connecting rods Lodpfx Aeuqdhwoahjta - Siemens S5 control system Additional equipment: Band shear AI 40 - Max. shearing force: 10 t - Max. strip thickness: 4 mm - Max. strip width: 400 mm - Strip cross-section: 600 mm² Automation: Kaiser servo feeder KWV 400 - Max. strip width: 400 mm - Entry height above table: 120 - 300 mm

Kondisi: bekas, daya: 22,06 kW (29,99 hp), gaya punching: 250 t, Excenter press EBU suitable for insertion work, UV tested Stroke adjustment from 10 to 140 mm Ltjdev T Dapopfx Aahea Ram adjustment 80 mm Stroke rate 50 /min.

Kondisi: bekas, Tahun pembuatan: 2000, Pressure: 25 t Stroke: 150 mm Throat depth: 420 mm Installation height: 450 mm Table surface: 700 x 820 mm Table height above floor: 850 mm Ram surface: 600 x 600 mm Downward speed: from 370 mm/s Upward speed: 370 mm/s Working speed: 18 - 33 mm/s Lsdpfovut N Nsx Aahjta Oil capacity: 300 l Drive power: 5.5 kW Weight: 5.8 t Space requirements approx. 1.1 x 2.0 x 2.4 m (LxWxH) Approved for manual loading operations according to CE standards. With electro-hydraulic drive, pressure/time and stroke-dependent controls, cut cushioning, mechanical depth stop, and two-hand operation.