Spotting tekan

REIS TUS 60-40 T

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 84.564 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 12 m/menit, pergerakan cepat sumbu Z: 12 m/menit, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, daya nominal (semu): 17 kVA, produsen pengendali: iTNC 530 Heidenhain, model controller: iTNC 530 Heidenhain, tinggi total: 2.500 mm, panjang total: 3.000 mm, lebar total: 3.000 mm, lebar meja: 500 mm, panjang meja: 650 mm, beban meja: 200 kg, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 10.000 rpm, jam operasional spindle: 22.855 h, daya motor spindle: 13.000 W, jumlah slot dalam magazin alat: 16, panjang alat: 300 mm, diameter alat: 130 mm, berat alat: 6 g, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is in well-maintained condition. Several components have recently been serviced or replaced. The following has been overhauled: - Complete X-axis bearing, including ball screw and bearing assembly - Various hydraulic components - Tool changer re-adjusted and sensor replaced - New door switch installed - New windows fitted (unfortunately already with some minor chip impact) - New coolant pump - New monitor, as the previous one was defective - New HR410 handwheel Gjlhccsvtnm Hsqteui The machine has relatively few spindle and operating hours. It has never been used for serial production, and was always run with care and consideration—warm-up programs, etc. As we are a tool and mold making shop, the machine was mainly used for precise contours rather than heavy machining. I am only selling because I require a simultaneous machining center and larger travels. Technical data: Year of manufacture: 2005 X travel: 500 mm y travel: 450 mm z travel: 400 mm Control: Heidenhain iTNC 530 Main spindle Speed range (main spindle): 20 – 10,000 rpm Spindle drive power: 9 / 13 kW Torque: 57 / 82 Nm Tool interface: SK 40 Rotary table Clamping area: 630 x 500 mm Swivel range: -5 / +110 ° Max. table load: 200 kg T-slots: 14 H7 T-slot pitch: 63 mm C-axis: +/- 360 ° Feed rates: Rapid traverse (X / Y / Z): 12 m/min Feed rate: 10,000 mm/min Tool changer: Magazine places: 16 positions Max. tool weight: 6 kg Max. tool length: 300 mm Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets free: 130 mm Tool interface: SK 40 Total power requirement: 17 kVA Machine weight: approx. 3.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Universal Tool Milling Machine DECKEL MAHO – DMU 50 Please note: No chip conveyor and no automatic probe included! - 5 axes (3+2) - WITHOUT tools Photos of the machine attached. The machine was deliberately not cleaned before taking the pictures – it is shown in its current working condition and is used daily. The operating hours can be seen in the images. Kinematics and geometry are suitable for our requirements, but a geometry inspection could be considered. There have never been any crashes or collisions during our ownership.

Kondisi: bekas, Tahun pembuatan: 1973, nomor mesin/kendaraan: 20591, Roller diameter: 500 mm Throat depth: 1050 mm Workpiece height: 400 mm Voltage: 400 V Gelhcscxxr Ejcqteui Table size: 750 x 800 mm Total power requirement: 5.5 kW Machine weight approx.: 1.5 t Required space approx.: 2.4 x 1.0 x 2.2 m Bandsaw in robust cast-iron design, equipped with infinitely variable variator drive and 4 pre-selectable gearbox stages. Cutting speed adjustable: Stage 1: 15–79 m/min, Stage 2: 67–305 m/min, Stage 3: 207–940 m/min, Stage 4: 2350 m/min. Includes blade tensioning device, worktable tiltable by +/- 40°, rear extension table, various saw band guides, belt grinding device, work light, foot switch, accessories.

Kondisi: bekas, Perlengkapan: filter jelaga,

Kondisi: bekas, Tahun pembuatan: 2006, Cutting diameter / mm Saw band length / mm Table height / mm Very well-maintained BEHRINGER band saw with heavy-duty roller support, load capacity up to approx. 50 tons. The machine is equipped as standard with stepless cutting speed adjustment, enabling universal sawing of all materials with both low and high strength. Guolhcouia Rkjcqtsi Type: HBP650-1204A Machine number: 706537 Year of manufacture: 2006 Dimensions: 10,000 x 67 x 1.6 mm Working range round: 20 – 650 mm Working range square min.: 20 x 20 mm Working range square max.: 1,200 x 600 mm Cutting speed: 10 – 110 m/min Remnant length automatic mode approx. 90 mm Remnant length manual mode approx. 10 mm Saw drive motor power: 9.2 kW Hydraulic pump motor power: 5.5 kW Voltage: 400 V, 50 Hz Connected load: approx. 16 kW Power consumption: approx. 33 A Material support height: 800 mm Including documentation

Kondisi: baru, Tahun pembuatan: 2024, en Gjlhsu Th Ekeccqteui

Tahun pembuatan: 1990, Kondisi: belum diuji (bekas), Pressure: 125 tons (2x63) Guolhccqjgy Hzpotsi Stepless working speed: 0-10 mm/sec Return speed: 20 mm/sec Clamping width between columns: 950x550 mm Table surface from front: 950x820 mm Table surface with lateral insertion: 1220x550 mm Ram surface: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Weight: 5,500 kg Height: 2,900 mm Drive power: 18.5 kW 2 hydraulic cylinders with precision synchronous control Stepless electronic stroke limitation

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Gjlhccqocxxrrjtjui Stroke: 0-500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Through-hole in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Approx. machine weight: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm.

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, model controller: iTNC 530, kecepatan rotasi (maks.): 18.000 rpm, berat keseluruhan: 12.500 kg, de1b11ac-8f4c-4ece-91fc-d724c3f574f8 Golevambiehccqtjui

Kondisi: sangat baik (bekas), Engel Victory 1350/220 Tech Clamping force: 220 tonnes Year of manufacture: 2004 Platen size (W x H): 860 x 830 mm Screw diameter: 55 mm Injection volume: 618 cm³ Control system: CC 200 Minimum mould installation height: 250 mm Maximum mould installation height: 730 mm Golhccopdrpzoqteui

Kondisi: bekas, 5tSWF Crane Technology Ltd. Guolhcedc A R Tocqtei