Pasteurisasi ruang

RICO GmbH

Tahun pembuatan: 2020, Kondisi: baru, 1000 l/h Stainless steel frame on 4 adjustable feet Minimum/maximum level sensor in the pressure tank Stainless steel pressure vessel The product is injected into the tank via a multi-nozzle head; Product pump: Fsdpfjcx Smbex Adgoft Check valve at product inlet Sight glass at product inlet CO2 pressure regulating valve for mounting on the CO2 bottle Sight glass in the pressure vessel Max. pressure: 6 bar incl. electronic control incl. pressure boosting pump

Tahun pembuatan: 2018, Kondisi: bekas, 2-vessel brewhouse mounted on a stainless steel frame as a brew block. This setup consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and draining the mash. Independent control of the thermo-oil heated jackets and bottom. The double-walled vessel is clad with insulation and features a polished interior surface. The top-mounted motor drives the cutting and stirring unit with stepless speed regulation. For lautering, there is a multi-piece perforated false bottom and a rectangular side manway for spent grain removal. Additionally, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spraying unit. - Stainless steel wort kettle/whirlpool. The vessel is double-walled and features welded heating zones in both jacket and base, heated with thermo-oil. It is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable locking mechanism, and a tangential wort inlet for knockout. The inner surface is polished. - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. The wort from one brew can thus be cooled within approximately one hour. Plates are made of stainless steel 1.4401 (AISI 316) and seals are EPDM. The wort chiller features a PT1000 temperature sensor. - Thermo-oil heater to heat the laser-welded heating zones of the brew vessels. Approximately 50-65 liters of oil are electrically heated in the thermo-oil tank to a maximum of 150°C. A safety switch automatically stops heating when 160°C is exceeded. The vessel is equipped with temperature and level sensors. A pump circulates the thermo-oil in a closed loop. - 12 hl hot water tank, standing separately on three legs, with a manway on top. The tank is heatable, insulated, and equipped with a hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with a motor power of 0.37 kW and stepless speed control. - Stainless steel piping and manual valves for redirecting product flows. Pipes are orbitally welded with polished inner surfaces. - Control unit with 10” touchscreen and PLC for brewhouse automation, housed in a stainless steel control cabinet. The following processes can be controlled and monitored: 1. On/off of agitator and cutting unit, and speed control. 2. Temperature control of mash/lauter tun. 3. Temperature control for kettle/whirlpool (separate for jacket and base). 4. On/off for product and CIP pump and speed control. 5. Display of inlet water temperature. 6. Display of wort temperature at outlet. 7. Temperature control of the thermo-oil tank. 8. Timer settings. 9. Mash program settings (multi-step mashing with up to 5 rests; adjustable times, temperatures, agitator and pump speeds). 10. Hot water tank temperature. Machine (additional): Compact brew block with hot water tank Ffodew Tbmdspfx Adget Max. wort output: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / control: control cabinet with PLC and touchscreen Material: stainless steel 1.4301 (AISI 304) Base structure: brew block on stainless steel frame, hot water tank separate Equipment: mash/lauter tun; wort kettle/whirl...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Tersedia sistem reverse osmosis dua tahap lengkap dengan alat pelembut dari Eurowater. 1) Sistem reverse osmosis dua tahap Eurowater DPRO B1-2/2, tahun pembuatan: 2013, kapasitas aliran maksimum: 1,08 m³/jam, pipa tekanan: stainless steel, sistem pipa: PVC, diameter membran: 4 inci, dimensi mesin P/L/T: sekitar 730 mm / 700 mm / 2000 mm. 2) Alat pelembut Eurowater SM 42-F, tahun pembuatan: 2015, dimensi mesin P/L/T: sekitar 1000 mm / 500 mm / 1650 mm. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Ffjdpfx Adew Ryu Ujgst

Kondisi: siap digunakan (bekas), nl: Blikdiameterbereik: 50 mm - 100 mm Blikhoogtebereik: 28 mm - 120 mm Capaciteit: tot 200 blikken per minuut Gereedschap voor ca.: 73 mm Aantal sluitkoppen: 6 Aantal vulzuigers: 16 Enkelvoudige mesdekselafscheider Aangedreven heffers Siemens touchscreen en: Can diameter range: 50 mm - 100 mm Can height range: 28 mm - 120 mm Capacity: up to 200 cans per minute Tooling for approx.: 73 mm No. of seaming heads: 6 No. of filling pistons: 16 Single knife lid separator Driven lifters Siemens touchscreen Fjdpfx Aswnriaodgeft de: Dosen-Ø-Bereich: 50 mm - 100 mm Dosenhöhenbereich: 28 mm - 120 mm Leistung: bis zu 200 Dosen pro Minute Werkzeug für ca.: 73 mm Anzahl der Verschließköpfe: 6 Anzahl der Füllkolben: 16 Einzelmesser-Deckelvereinzelung Angetriebene Hubvorrichtungen Siemens Touchscreen fr: Plage de diamètre des boîtes: 50 mm - 100 mm Plage de hauteur des boîtes: 28 mm - 120 mm Capacité: jusqu’à 200 boîtes par minute Outillage pour env.: 73 mm Nombre de têtes de sertissage: 6 Nombre de pistons de remplissage: 16 Séparateur de couvercles à lame simple Élévateurs motorisés Écran tactile Siemens

Tahun pembuatan: 2004, Kondisi: bekas, Various ZKG fermenters, storage tanks, and pressure vessels for beer, featuring jacket cooling (cooling jacket), year of manufacture 2004, net capacity approx. 45 hl (4,500 liters), rated for 1.5 bar. Fedpfxov Tb Nhj Adgeft

Kondisi: bekas, Tahun pembuatan: 2018, en_overview_The Gruber AFD6 is a bottle and party keg filling machine, manufactured in 2018 by the German company Gruber, with a total of 725 operating hours. The machine is available immediately. Technical Details - Output: 800 bottles/hour (0.33l) - 750 bottles/hour (0.5l) - 600 bottles/hour (1.0l) - 400 bottles/hour (2.0l) Fjdpfx Adeu I Hr Ujgeft - 240 bottles/hour (5.0l party keg) Actual output may vary depending on CO2 content and beer temperature (practically, up to 1,000 bottles/hour with 0.33l bottles have been achieved). - Long-tube filler with 6 filling stations - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725 h

Kondisi: bekas, KZE-1000 Fsdpow Tlq Hjfx Adgoft

Kondisi: bekas, Tahun pembuatan: 2006, de1 Ffsdpfxovguhks Adgst

Kondisi: bekas, Tahun pembuatan: 1986, en-GB Ffodpfx Aju Dimyjdgst

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 194 kW (263,77 hp), jenis bahan bakar: diesel, warna: hijau, berat kosong: 53.050 kg, Tahun pembuatan: 2012, jam operasional: 13.200 h, nomor mesin/kendaraan: 835.5.1445, Very good Sennebogen material handler with crawler undercarriage for sale. Year of manufacture: 2012 Approx. 160 engine hours (new engine installed in 10/2024 for approx. €57,000, invoice available) Last maintenance and replacement of wear parts carried out in 02/2024 for €11,300 (invoice available) Total operating hours approx. 13,200h Ffjdpjvzn E Eefx Adgot