Mesin penggilingan spindel putar

Robland Ti 120 X3

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Horizontal drilling head with 4 spindles on X axis Horizontal drilling head with 2 spindles on Y axis Grooving saw D=100 mm (X axis direction) Kjdpfx Aajvtyc Hehefa Stop cylinder for workpiece positioning Workpiece clamping system Workpiece length: 2500 mm Workpiece thickness: 12-60 mm WOODWOP for the machine WOODWOP IMPORT DXF BASIC (1 license)

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm Kfodpfx Ajd Hz Nijahsa • X-axis support: 3000 mm • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h

Kondisi: baik (bekas), Tahun pembuatan: 2002, Robust tilting spindle moulder T 26, tiltable from -45 to +45 degrees with 2-axis positioning control Duocontrol Tilting spindle moulder with excellent features A real treat for any Martin enthusiast Pole-changing drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle from -45 to +45 degrees, electrically adjustable Maximum height adjustment 150mm, electrically adjustable Kfsdpjvv H T Refx Aahoa When adjusting the height, the correction factor for the tilt angle is shown on the upper display; this is then set at the stop, making settings according to drawings possible Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes, or automatic positioning of height and fence Fence with lift-away device, can be swung away (for curved milling work) Table opening with eccentric table rings, electrically adjustable Table extensions on right and left with pull-out workpiece support Support can be extended by 700mm Table length approx. 2400mm Folding fence for plunge milling Original Martin aluminium fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller feed unit HolzHer 1117, with 8 speeds, forward/reverse, new rollers Feed socket, can be switched from control panel Extraction ports 2 x 120mm 6 bar compressed air connection Emergency stop switch Some machine parts newly painted Approx. 7,400 operating hours Operating manual CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1,800kg. The machine can be demonstrated on site by appointment. We exclusively offer machines that are ready for demonstration and available in our warehouse—see "more offers from this supplier."

Kondisi: bekas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Kfsdpsu Su Husfx Aahja Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx: 2500 kg Weinig Profimat 23 four-sided planer, window version with glass bead cutting, or can be used as a grooving spindle ATS control and program control --- Machine is currently being overhauled and function-tested Technical data summary (For any additionally included accessories, please enquire) --- General --- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx: 2500 kg Spindle configuration --- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically controlled up/down Spindle specifications --- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features --- > Glass bead separation or can be used as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package - Shared control of the right spindle and glass bead removal via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planing heads (Technical data according to manufacturer - no liability assumed!)

Kondisi: bekas, Working width 4000 mm Working height 2600 mm Number of pressing cylinders 6 pcs. Dimensions (length/width/height) 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000, ----- CE version Robust frame-welded construction made of thick-walled special hollow profiles, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressing cylinders on special pressure beams with single-handed quick adjustment with weight balance, height-adjustable in 50 mm hole grid, long sliding carriages ensure the permanent absorption of high pressing forces. Fast and smooth width adjustment via ball-bearing mounted carriage with central locking, fixation in 50 mm hole grid. Upper horizontal pressing cylinder infinitely height adjustable and fitted with weight compensation. Lower horizontal pressing cylinder with centering bores for the two abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, equipped with 2 vertical pressing cylinders d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-handed quick adjustment, 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm (double acting), with weight compensation; 2 manual control valves, pressure gauge, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg pressing pressure vertical, with 3 kW three-phase motor for 400 Volt, 50 Hz mains voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article ,00 pcs Central pressure beam with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article ,00 pcs Individual pressure regulation for central pressure beam, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Cross pressure device complete with pressing cylinder double-acting, weight compensation, pressure hose and shut-off valve Weight compensation on lower horizontal cylinder omitted Article ,00 pcs Individual pressure regulation for cross pressure device, pressure regulation range up to max. 100 bar (for pressing of cross-bar windows) Article ,00 pcs Shut-off valve for 3rd vertical cylinder Article ,00 pcs Shut-off valve for upper horizontal cylinder Article ,00 pcs Width compensation pad for pressing small frames to bridge the 1st pressure beam, including shut-off valve on 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles The required height increases by 100 mm Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device Ksdpfx Aaeu Uvalohsfa consisting of: locking device for vertical pressure beams and 3 attachable, side-guided swing pressure plates Article ,00 pcs Double swing pressure plate for pointed (triangle) windows ----- Total price as specified above ex works: On request! -----

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) Kjdpevu Hfqofx Aahjfa > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Tahun pembuatan: 2023, Kondisi: baru, nomor mesin/kendaraan: 28086221201 (AABM0013), MASTERWOOD CNC Processing Centre Type PROJECT TF 100 2.0 "PARTNERSHIP EDITION" - MAST0337 Technical Specifications: Axes: X-Axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0-25 m/min. Y-Axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 85 mm Travel speed: 0-50 m/min. Z-Axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0-20 m/min. Units: 16-position drilling head: Vertical spindles in X-direction: 5 pcs Vertical spindles in Y-direction: 5 pcs Horizontal double drilling spindle in X-direction: 2+2 pcs Horizontal double drilling spindle in Y-direction: 1+1 pcs Drill spindle pitch: 32 mm Spindle speed: 4,000 rpm Motor: 1.7 kW Grooving saw: in X-direction Speed: 4,000 rpm Max. saw blade diameter: 125 mm Motor: 1.7 kW (grooving saw is integrated in the drilling head) Control System: Personal Computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with min. 300 GB storage CD-ROM drive Colour monitor Integrated video card 2 Ethernet cards Software: MASTERWORK MACHINE VERSION Kfodeiukvkjpfx Aahea Additional Data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction port: 1 x 150 mm Further equipment features: - Air flotation tables at working area - Roller table at infeed and outfeed - Board measurement sensor - Ball screw and linear guides - Rack and pinion drive - DXF file import (Operating manual, wiring and pneumatic diagrams included in digital format) "PARTNERSHIP EDITION" consists of: Milling unit, incl. MASTERWORK software expansion Speed: 1,000 to 18,000 rpm Motor: 4.5 kW with ISO 30 interface Includes integrated extraction control (only the drilling head is extracted during drilling, only the milling unit during milling) 6-position tool changer 3 pcs ISO 30 collet chucks incl. collet Tooling set, consisting of: HW Dowel drills: 5 pcs 5mm – overall length 70 mm – blind hole drill 1 pc 5mm – overall length 70 mm – through hole drill 4 pcs 8mm – overall length 57.5 mm – blind hole drill 2 pcs 10mm – overall length 57.5 mm – blind hole drill 1 pc 10mm – overall length 70 mm – blind hole drill 1 pc 8mm – overall length 70 mm – blind hole drill 1 pc 15mm – overall length 70 mm – blind hole drill 1 pc 35mm – overall length 70 mm – blind hole drill 1 HW grooving saw blade d=125 mm, bore=20 mm, width: 4.0 mm, Z=35 WSA 1 DIA cutter, right – overall length 103 mm, working length 43 mm, D=18 mm, shank: 20x50 mm, Z 1+1 1 DIA cutter, left – overall length 103 mm, working length 43 mm, D=18 mm, shank: 20x50 mm, Z 1+1 1 VHW reversible tip finish cutter, right, D=10 mm Folding roller conveyor at infeed Folding roller conveyor at outfeed Automatic central lubrication Plus options: Complete package for CLAMEX connectors € 3,500.00 Complete door package € 3,500.00 PaletteCAD start software package + CAM interface € 3,000.00 Freight, installation, commissioning € 3,000.00 Available immediately ex location Seevetal Subject to prior sale.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.060 kg, tinggi total: 1.800 mm, lebar total: 1.830 mm, panjang total: 2.000 mm, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 800 mm, panjang umpan sumbu Z: 50 mm, kecepatan spindel (maks.): 3.200 rpm, berat benda kerja (maks.): 25 kg, daya: 2,2 kW (2,99 hp), kebutuhan udara: 750 m³/jam, tekanan kerja: 6 batang, jumlah spindel: 12, berat kosong: 975 kg, masa garansi: 12 bulan, Programmable boring machine with easy-smart-touch software, 3 controlled axes X, Y, Z, with the option to machine grooves and perform simple milling operations (accessory). Suitable for top-side and through-feed panel processing. Panel movement via triple suction cup system. Machine built in compliance with CE standards. Kfodeu U Hgiopfx Aahoa STANDARD EQUIPMENT DRILLING UNIT: Head with independent spindles - 7 vertical spindles - 1 double horizontal spindle TH1 (X axis) for front/rear drilling MANUAL PANEL ALIGNMENT DEVICE PANEL END READER for perfect jointing Remote assistance software Extraction flange ANTI-SCRATCH BRUSH TABLE to prevent dust and chip accumulation Selectable operating mode: operator side or continuous cycle HARDWARE & SOFTWARE 12” touch screen with NO TEXT patented MAGGI system USB and Ethernet ports for file import, online support, and software updates System based on Linux kernel CNC memory for up to 1,000 programs Packaging: Wrapped on pallet (2200x2050x160 mm - 123 kg)

Kondisi: baik (bekas), Tahun pembuatan: 2011, I am offering for sale a 3-axis CNC machining center HOMAG WEEKE VENTURE 106M with traverse table, year of manufacture 2011. Configuration: - 3-axis main spindle, 9 kW - Tool magazine with 9 positions for HSK63, mounted on the machine frame - 1x grooving saw, X-direction - Drilling head: 12+4+2 drilling spindles - Usable working area: 3050 x 1260 mm - 2 working fields, 2 clamping zones - Automatic central lubrication system Kfodpjvld Epofx Aahsa - WoodWop 6.0 software with operating manual - BECKER vacuum pump, 110 m³/h - Additional vacuum unit for template work or additional clamping fixtures Good condition. Immediately available from stock.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25167180701, lebar total: 1.000 mm, tinggi total: 60 mm, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 20 m/menit, tinggi benda kerja (maks.): 60 mm, kecepatan rotasi (min.): 4.000 rpm, daya: 4,5 kW (6,12 hp), kebutuhan udara: 2.000 m³/jam, CNC machining center Brand: Masterwood Model: Project TF 100 2.0 Technical Data: Axes: X-Axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-Axis: Max. workpiece width: 1,000 mm (for all units) Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-Axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min Minimum and maximum workpiece sizes depend on weight and the length-to-width ratio. - Air tables in the working area - Roller support at both infeed and outfeed - Plate measurement sensor - Ball screw spindle and linear guides - Rack and pinion drive - Central lubrication system - DXF file import Milling Unit Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Including integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Kjdpfexz Hgdjx Aahefa Includes grooving saw blade, 2 diamond cutters, 1 WPL finish cutter Prepped for CLAMEX and door package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit configured for door processing, for machines with tool changers, fully equipped including special tool change position in the tool changer, angle gearbox for accommodating a lock case milling cutter, and a macro for lock cases Automatic, program-controlled central lubrication Monitoring camera