Mesin cuci ultrasonik

ROMER /Ultrasoniczne Wanny ultradzwiękowe

Tahun pembuatan: 2020, Kondisi: baru, Washing machines and ultrasonic cleaning baths for washing, phosphating, chromating, degreasing, and removing paint coatings Ffjdpfx Aaofzk Ewjgsw Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to prevent heat loss and enable faster heating. High-quality materials ensure long service life of the vibrating elements. Heating system The heating elements used in ROMER tanks are made from top-grade materials and high-temperature resistant ceramic components. The heating system ensures high thermal efficiency, with hot water automatically mixing with cold water to heat the entire tank evenly. Ultrasonic transducers The ultrasonic elements used in ROMER cleaning machines are installed in immersion modules, which better reflect vibrations and are replaceable. The ultrasonic frequency range is 20–40 kHz depending on the item being cleaned; lower frequencies are used for large, robust parts and higher frequencies for jewelry, delicate mechanical systems, etc. All transducers are connected by high-temperature resistant cables.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Ultrasonic Cleaning System ULTRA200 Fodov U A Izopfx Aagefw Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. loading weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Constructed entirely from stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control: Fatek, HMI by Weintek Electrical connection load: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance - Ultrasonic immersion transducer with dual-side sonication - Output: 2,000 W effective / 4,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration unit from the Glogar Technology Center, available immediately

Kondisi: baru, Tahun pembuatan: 2024, Tunneltyp-Teilereinigungsanlage für Metall- und Kunststoffteile. Einsatz in diversen Branchen wie Automobilindustrie, Lebensmittelindustrie, Metallbearbeitung, Blechverarbeitung, Kunststoffbehälter usw. Funktionsprinzip Das Werkstück gelangt über ein Bandförderer-System in den Reinigungstunnel; durch gezielt platzierte Düsen werden sämtliche Bereiche des Werkstücks gereinigt. Während das Werkstück den Tunnel durchläuft, wird es kontinuierlich mit einem Gemisch aus erhitztem Wasser und Reinigungschemikalien unter Druck gewaschen. Dabei werden sämtliche Öle, Späne und sonstige industrielle Verunreinigungen von der Oberfläche entfernt. Tunnelwaschanlagen werden sowohl standardisiert als auch individuell anwendungsspezifisch von der INTERSONIK-Ingenieurabteilung konzipiert. Ablauf des Reinigungsprozesses Waschen, Passivieren und Trocknen werden von den Intersonik-Prozessingenieuren exakt entsprechend der gewünschten Ergebnisse mit umweltfreundlichen Intersonik-Chemikalien entwickelt. Betriebsablauf ► Vorwäsche ► Hauptwäsche ► Spülung ► Passivierung ► Trocknung Anwendungsbereiche ► Automobilindustrie ► Wehrtechnik ► Lebensmittelindustrie Ffsdjd I Azvspfx Aagjw ► Für alle Fertigungsindustrien bei Serienfertigung und Wartungszwecken ► Metallmöbelindustrie Das Förderbandsystem wird von INTERSONIK speziell nach Ihren Anforderungen und Werkstücken konstruiert und gefertigt. Förderbandgeschwindigkeit ist einstellbar. Automatisches Flüssigkeitsnachfüllen ist Standard. Elektrische Beheizung ist Standard, Wärmetauscher- und Brennerbeheizung sind optional. Alle Betriebsdaten können über Digitalanzeigen eingesehen und gesteuert werden. SPS-Steuerung ist optional verfügbar. Alle Flüssigkeitstanks sind wärmeisoliert. Absaug- und Nebelabscheideeinheit sind standardmäßig integriert. Für weitere Optionen und Details stehen wir Ihnen gern zur Verfügung. Tunnelwäsche, automatische Teilewaschanlage, Kfz-Teilereinigung, Metallreinigung, Teilereiniger, Entfettung, Spritzreinigung, Druckwaschmaschine

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 3 SUB OPERATION - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 57,297 h - Spindle hours: 39,537 h EQUIPMENT Fsdpfx Aaju Elk Degofw - Control: Fanuc 18iT - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: IEMCA SMART 316/32L - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer. - Electrical transformer - Number of driven tool holders: 3

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Multispindle lathe Schütte AG20 Ffodpfx Aajhrihyegsw

Kondisi: baik (bekas), 10,000 units of insert mesh grating for pallet racks, galvanized Insert mesh available in various sizes, mesh widths, load bars, and load capacities: Negotiable price: from €15.00 net per m² ex stock Larger quantities available on request! Insert Mesh Size Mesh Width Load Bar Load Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Fedpfx Aasdhhukjgefw Used goods, very good condition – see pictures. Goods are in stock. Transport available upon request. Viewing possible at any time by appointment. Further information on request. Over 5,000 linear meters of pallet racking from numerous manufacturers kept in stock at all times. (Subject to change and errors in technical data, information, and prices as well as prior sale! See our T&Cs – all prices excl. VAT ex stock) Purchase / Sale We are continuously looking for and offering numerous items from various sectors: • Broom-clean company clearances • Liquidations • Fast - flexible - efficient! • We also clear out and/or dispose for insolvency administrators. Write to us with a few keywords – we will contact you immediately. To visit our page, please click on our logo!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Cell with TIG-OTC-NH52-NEFC welding robot Country of origin of the cell: Italy Year of construction: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Payload: 5 kg Controller: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm Ffodpfx Aaem Uyhhsgow Width 1900 mm Height 2400 mm

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), I have for sale a Deckel Maho DMU 100T Machining Centre. Control system: Heidenhain MillPlus Machine technical condition: Very good Year of manufacture: 2000 Country of origin: Germany Machine specifications: X-axis travel: 1080 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Swivelling head Maximum spindle speed: 12,000 rpm Tool magazine: 32 tools (2x16 tools) High-pressure coolant Through-spindle coolant Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Documentation Machine weight: 10 t Loading included in the price Fodpfx Ajlffzcoagofw Stal-Com has been specialising for 17 years in the sale, servicing, and training on CNC machines from the DMG group. We specialise in all models of Gildemeister lathes and Deckel Maho Machining Centres. All our machines undergo a meticulous technical inspection. In addition to clients from Poland, our machines are purchased by customers throughout Europe and some parts of Asia. Each machine can be inspected during operation, as we also carry out machining services. Upon purchasing a machine from us, we provide personnel training and can also assist in setting up part production at your site. We cooperate long-term with many companies, supplying them with successive machine tools. Stal-Com Rafał Dziendziel

Kondisi: baik (bekas), TECHNICAL DATA AXES Rapid traverse X,Y: 15,000 mm/min Fedpfsu Uic Tsx Aagjfw Rapid traverse A,B: 15,000 mm/min Rapid traverse Z1,Z2,E: 18,000 mm/min Rapid traverse C: 90,000°/min Minimum input increment: 0.001 mm Minimum input increment, C-axis: 0.001° MACHINING CAPACITY Max. turning diameter: 20 mm Max. spindle stroke: 205 mm Max. drilling capacity: Static: 14 mm; Driven: 8 mm Max. tapping capacity: Static: M10 x P1.5; Driven: M6 x P1.0 MAIN SPINDLE Spindle speed: 500 – 10,000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm SUB SPINDLE Max. clamping diameter: 20 mm Max. part length for ejection forward: 150 mm Max. unclamping length: 75 mm Spindle speed: 500 – 10,000 rpm Sub spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operating mode: Right-handed Dimensions: 2,700 x 1,400 x 2,400 mm Weight: 3,400 kg SCOPE OF SUPPLY Includes (not an exhaustive list): Control: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic power unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply as per photo documentation We assume no liability for the correctness, completeness, or current validity of the information provided.

Kondisi: baik (bekas), Herminghausen SR40 III CNC centerless grinding machine Fodpfxjgq Ddfs Aagjfw