Beli Pers hidrolik tiang tunggal mulai dari 125 t bekas (37)

Tahun pembuatan: 1980, jam operasional: 7.663 h, Kondisi: bekas, Pressing force: 320 t Throat depth: 800 mm Stroke: 630 mm Max. distance table/ram: 1000 mm Ram dimensions: 710 x 600 mm Table size: 800 x 1200 mm Working height: 1015 mm Oil capacity: 1100 l Operating hours: 7663 h Kedpfx Aod Ih Nrsa Njwt Machine weight approx. 15 t Dimensions approx. 1600 x 2200 x 4800 mm Control cabinet dimensions approx. 1200 x 400 x 1800 mm Function tested. During the test run, it was noticed that the press ram is not 100% leak-proof. Additionally, the hand control cable has been repaired several times. The cover is missing, as it was removed by the customer to enable crane operation. Operating manual and electrical diagrams are available.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: STHP 80KN, tinggi total: 1.320 mm, lebar total: 510 mm, panjang total: 200 mm, gaya penekanan: 8 t, lebar meja: 300 mm, berat keseluruhan: 110 kg,

Tahun pembuatan: 1992, Kondisi: bekas, nomor mesin/kendaraan: 530, The STEINER hydraulic press has been designed and manufactured with practical considerations in mind. The hydraulic unit is mounted on the hydraulic tank at the rear of the press. Control blocks and valves are easily accessible from the outside and can be replaced quickly if necessary. The hydraulic radial piston pump is installed on the drive console and is connected via a coupling to the motor and pump mounting. The press frame is indestructible and torsion-resistant, made from a steel welded construction. The bolster table is bolted to the frame. The hydraulic cylinders are mounted from above onto the press frame and are guided in the required direction through the mounting holes. The piston is connected to the piston rods via a split ring. Four-sided, diagonal, flat grooves in the frame enable highly precise movement. The hydraulic cylinders are made from high-quality materials and are designed for high pressure. The piston rods are ground and hard-chrome plated. The cylinder tubes are honed internally. Seals, proven over many years, are characterized by high quality and tightness. The piston rod guidance uses guide bands that stand out due to minimal wear and long service life. The control panel houses control, regulation, and monitoring devices for all control units. Mutual interlocks ensure that two program processes cannot run simultaneously. The electrical control system is located in a closed control cabinet. Press force – 8,000 kN Operating pressure – 285 bar Installation height – 850 mm Stroke – 250 mm Table area – 1,550 x 1,450 mm Ram area – 1,550 x 1,450 mm Frame passage – 1,800 mm Lateral opening in the frame right & left Width x height – 1,300 x 1,075 mm Table plate thickness – 155 mm Machine width approx. – 3,100 mm Depth approx. – 4,300 mm Height approx. – 4,660 mm Table height above floor – 500 mm Ksdpopgktcofx Aa Newt Table height below floor – 755 mm Drive power – 55 kW Oil capacity approx. – 1,400 litres Total weight approx. – 60 tons

Tahun pembuatan: 1974, Kondisi: bekas, nomor mesin/kendaraan: 82, Hydraulic frame press for sheet metal punching with a capacity of 630 tons, designed for cold forming. The vertical frame press, featuring a welded steel construction, consists of a bed and a top platen joined by bolts. A control cabinet is installed adjacent to the press, and an oil overflow tank is located deep within the foundation, facilitating oil filling for the press system. The press units are removable, simplifying assembly and maintenance. The press is operated via push-button control. The stroke height of the ram is set by adjusting the end-stop position. Technical specifications: 1. Rated pressing force: 630 tons 2. Rated operating fluid pressure: 2,200 kN/cm 3. Ram stroke: 750 mm 4. Ram speed, mm/s: a) Idle speed: 215 b) Working stroke: 10 c) Return stroke: 120 5. Maximum distance between bed and ram: 1,400 mm 6. Distance between uprights: 2,200 mm 7. Table dimensions, mm: a) Left to right: 2,220 b) Front to back: 1,800 8. Die plate thickness: 220 mm 9. Table height above floor: 410 mm 10. Nominal force of hydraulic cushion: 250 tf 11. Hydraulic cushion stroke: 350 mm 12. Ejector speed, mm/s: a) Ascending: 51 13. Press dimensions, mm: a) Left to right: 5,070 b) Front to back: 3,000 c) Height: 7,065 14. Press height above floor: 5,480 mm 15. Press weight: 69,400 kg Electric motor speed: 1,450 min-1 Kedpfx Aepgkt Ssa Nowt Operating voltage: 400/230 V Mains frequency: 50 Hz ± 1 % Rated air pressure: 0.7 Pa

Tahun pembuatan: 1989, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: K 1283, A used bending machine from manufacturer HMK. Pressing force up to 500 t Year of manufacture: 1989 Machine number: 1283 Kedjd Eg R Tepfx Aa Nswt

Kondisi: diremajakan ulang (bekas), en-GB: Complete retrofit Kwodpfx Aow S Uazoa Njt Pressing force: 1,600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - A complete retrofit kit for unrestricted manual loading and unloading in compliance with EU directives and implementation of CE-compliant equipment, - New control cabinet with certified dual-channel electronic PLC safety control by Siemens (1512SP F or 1515F) for process control, featuring an integrated operator panel for the following operating modes: setup - two-hand, single stroke - two-hand, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - Hydraulic safety block for monitoring the closing movement of the main cylinder, - Position-monitored directional valve for the up and down movement of the main cylinder ram, - Two-hand control unit with dual-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - Replacement of the main and control pump motors, - Replacement of the main cylinder seals, - Fine filter with contamination indicator, - The press is equipped with an electronic travel measurement system (incl. teach-in function and display of the current ram position). This eliminates the need for a mechanical cam switch. Main control panel integrated in the control cabinet (mounted on the right side of the machine) - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4701, gaya penekanan: 394 t, lebar meja: 51 mm, panjang meja: 680 mm, panjang langkah: 200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Front: 510 mm Side: 270 mm Ram stroke: 200 mm Clear opening: 455 mm Table Table size: 510 × 680 mm Force and Drive Pressing force: 394 t Motor power: 15 kW Speeds Downstroke speed: 350 mm/s Working speed: 4 mm/s Return speed: 300 mm/s MACHINE DETAILS Kedewr Dvyspfx Aa Nowt Height: 2,710 mm Width: 1,530 mm Depth: 1,610 mm Machine weight: 6,620 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.500 mm, lebar total: 2.400 mm, panjang total: 1.000 mm, kedalaman tenggorokan: 500 mm, gaya penekanan: 300 t, lebar meja: 1.000 mm, panjang meja: 700 mm, kecepatan operasi: 14 mm/dtk, berat keseluruhan: 13.500 kg, kecepatan mundur: 265 mm/dtk, tinggi kerja: 1.100 mm, jangkauan kerja: 800 mm, tekanan: 290 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Tekanan: 300 ton Daya motor: 30 kW Kedalaman pelubangan: 500 mm Kecepatan kerja variabel: 14,9 hingga 9 mm/detik Kecepatan pendekatan: 178 mm/detik Kecepatan mundur: 265 mm/detik Tekanan maksimum: 290 bar Langkah piston: 500 mm Ukuran meja bawah: 1.000 x 700 mm Ukuran meja atas: 800 x 600 mm Cahaya vertikal maksimum: 800 mm Tinggi kerja: 1.100 mm Lebar depan total: 10.000 mm Kodpfewpf S Djx Aa Nswt Total lebar samping: sekitar 2.400 mm Total tinggi: sekitar 3.500 mm Berat: sekitar 13.500 kg.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 400 t, lebar meja: 2.000 mm, panjang meja: 1.000 mm, kecepatan operasi: 106 mm/dtk, kecepatan mundur: 125 mm/dtk, panjang langkah: 750 mm, kecepatan penekanan: 12 mm/dtk, Perlengkapan: penghadang cahaya keselamatan, HYDRAULIC C-FRAME PRESS FOR STRAIGHTENING RAILWAY TRACKS We are offering a new or rebuilt version of this press. The press will be available for sale by the customer in Q2-Q3 2026, as the project timeline has been extended. The hydraulic press CF-400E/NC is part of the CF/NC series and has been specifically developed for the straightening of railway rails. It is equipped with an upper and lower table made from machined C45E steel with DIN 650 T-slots. The press uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential safety and health requirements as per CE regulations. TECHNICAL DATA Pressing force T 400 Kedpfx Aswkv A Nja Nswt Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure Bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Ram plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The C-frame is fully welded and made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element analysis software. • The upper table ensures perfect alignment thanks to four lateral cylindrical guides (80 mm diameter) fitted with maintenance-free bimetallic bushings. CYLINDER AND HYDRAULIC UNIT • Main cylinder is single-acting, jacketed, with a chrome-plated piston and maintenance-free, wear-resistant guides. • Two side-mounted double-acting cylinders with chrome-plated pistons and wear-resistant guides allow rapid advance and return speeds. • Equipped with two independent hydraulic safety blocks. • Motorized hydraulic unit with pre-fill valve for advance and return. Constant power pump with variable flow rate. • Fitted with a directional valve, pressure relief valve, decompression valve, and an air-oil cooling system. • Glycerin manometer with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7” touchscreen, model KTP-700 COMFORT, installed in the control cabinet. Allows programming of semi-automatic and automatic operating modes, output, stroke, and dwell time. Offers a storage capacity of 300 recipes, with each recipe allowing pre-programming of all parameters. • All electrical and hydraulic controls are redundant and self-monitored. Includes an additional safety block and built-in self-monitoring devices for controls and safety circuits. Includes verification and certification of correct functionality and safety distances for light curtains. • Operation via a low-voltage electric foot pedal. • For safety, the system is equipped with Category IV safety laser and workspace protection with light curtains.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.250 mm, lebar total: 3.650 mm, panjang total: 6.000 mm, gaya penekanan: 400 t, lebar meja: 2.520 mm, panjang meja: 6.000 mm, kecepatan operasi: 3 mm/dtk, berat keseluruhan: 28.500 kg, kecepatan mundur: 18 mm/dtk, tekanan: 319 batang, daya: 11 kW (14,96 hp), HYDRAULIC PRESS FOR STRAIGHTENING LARGE ELECTRO-WELDED STRUCTURES AND OXY-FLAME CUT SHEET METAL The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large electro-welded structures and oxy-flame cut plates. As with all our T/NC series hydraulic presses, its design facilitates the loading and unloading of large workpieces, plates, or structures. It allows access to various pressing points without having to move the workpiece thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. It features an optimized hydraulic system operating at a pressure below 319 Bar, thereby ensuring long-lasting durability and high reliability in its operation. STRUCTURE AND TABLES - Comprises an electro-welded frame manufactured exclusively from S355JR steel. - The structure is stabilized and machined after welding to guarantee perfect parallelism and precision. - Designed and calculated using finite element analysis software. - Longitudinal movement of the bridge is driven by a frequency inverter and toothed belt. - Lateral movement of the head is motorized and controlled via frequency inverter. Complies with all essential health and safety requirements as per CE standards. Kjdpjwpgmvjfx Aa Nowt CYLINDER AND HYDRAULIC UNIT - Double-acting cylinder with honed barrel, chrome-plated piston rod, and maintenance-free anti-wear guides. - Equipped with a removable and interchangeable pad to prevent damage to the piston and machined at the end to accommodate tooling. - Standard anti-rotation device and front graduated scale with limit switches for stroke adjustment. - Motorized hydraulic unit with two speeds and automatic deactivation of high speed. - Includes a cylinder decompression valve. - Pressure regulator. - Glycerine manometer with tonnage readout. ELECTRICAL INSTALLATION AND SAFETY - Electrical panel includes a selector switch for choosing between manual and semi-automatic operation. - Also features a selector to choose between rapid approach speed or slow working speed. - Operated via a pendant control station with emergency stop and low-voltage maneuvering. - Includes a confirmation pushbutton for operations. - Equipped with a safety rope device installed around the perimeter.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HV-300NC, tinggi total: 1.840 mm, tinggi meja: 950 mm, lebar total: 3.200 mm, panjang total: 2.500 mm, gaya penekanan: 300 t, panjang meja: 750 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 15 mm/dtk, panjang langkah: 450 mm, kecepatan penekanan: 2 mm/dtk, Perlengkapan: dokumentasi / manual, TECHNICAL DATA: Pressure 300 t Motor output 7.5 kW Throat 405 mm Kedpewk Hkqjfx Aa Njwt Working speed 2 mm/s Approach speed 9.9 mm/s Return speed 14.7 mm/s Maximum pressure 320 bar Piston stroke 450 mm Support table 2,500 x 750 mm Guide diameter 60 mm Main table 750 x 750 mm Maximum daylight between tables 900 mm Working height 950 mm Support blocks 150 x 150 x 750 mm Overall length 3,200 mm Overall width 2,500 mm Overall height 1,800 mm Weight 13,300 kg DESCRIPTION: Our horizontal hydraulic ram presses of the HV/NC series are available with three different pressing forces from 150 to 300 tons. Horizontal hydraulic presses are specifically designed for the straightening and bending of profiles, bars, and beams. Thanks to the horizontal design of the machine, large beams and profiles can be worked with ease. The latest generation horizontal hydraulic press of the HV/NC series has evolved into a versatile machine capable of accommodating a wide range of tool options. STRUCTURE AND TABLES The horizontal hydraulic straightening presses of the HV/NC series consist of a C-frame electro-welded structure manufactured exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. The design is calculated using finite element software. All of these features ensure that we consistently meet our high standards for robustness, precision, and quality. They are equipped with a main sliding table and a rear support table made of high-strength steel with T-slots to DIN 650. Support blocks made from C45E steel are supplied as standard. The main table ensures perfect parallelism via four cylindrical guides with maintenance-free bimetallic bushings for frictionless operation. Adjustable support rollers on each side are included as standard equipment. CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with seamless cold-drawn tube, chromed piston, and maintenance-free wear-resistant guides. Motorized hydraulic unit with two speeds and automatic fast-speed shut-off. Includes a cylinder decompression valve. ELECTRICAL INSTALLATION AND SAFETY The machine features a SIEMENS safety PLC, SIMATIC S7 1200 type and a 4-inch MTP-400-type touchscreen located above the electric foot pedal. It allows programming of semi-automatic and automatic operation modes, power, stroke, and dwell time of the upper cylinder. There is a memory capacity for 99 recipes, with all parameters programmable for each recipe. The electrical control panel features a selector switch for choosing between manual or automatic operation, and a keyed selector for maintenance operations. Electrical and hydraulic controls are redundant and self-monitoring. An additional safety block and self-monitoring devices for controls and safety are integrated.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.500 mm, lebar total: 2.800 mm, panjang total: 1.200 mm, gaya penekanan: 300 t, Hydraulische Presse Kodswhc H Aspfx Aa Newt Marke: Van De Graaf Typ: HVK-300 Kapazität: 300 t

Kondisi: bekas, Tahun pembuatan: 1990, Pressure: 160 t Stroke: 200 mm Throat depth: 500 mm Installation height: 500 mm Table surface: 1140 x 980 mm Table height above floor: 860 mm Ram surface: 1000 x 800 mm Oil capacity: 1000 l Drive power: 50.0 kW Weight: 18.0 t Required space approx.: 1.3 x 2.6 x 3.4 m (LxWxH) Ksdpfx Aajwvva Se Newt Through-hole in table: 180 mm Year of manufacture: 1981 – Modernized: 1990 Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Fitted with oil-hydraulic drive; pressure, time, and stroke dependent control; hydraulic cutting shock absorption; mechanical depth stop; two-hand operation. Can be offered unused or alternatively with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1998, Pressure: 315 t Stroke: 500 mm Throat depth: 425 mm Installation height: 1000 mm Table size: 1200 x 815 mm Table height above floor: 800 mm Ram size: 1100 x 700 mm Kwjdpfevzxphox Aa Njt Speed downward: from 48 mm/s Speed upward: 330 mm/s Working speed: 19 mm/s Oil capacity: 1600 l Drive power: 82.0 kW Weight: 23.0 t Space requirement approx.: 2.4 x 2.8 x 4.0 m (LxWxH) Approved for manual loading according to CE standard with electro-hydraulic drive, pressure/time and stroke-dependent control, photoelectric safety guard at the front (Sick), two-hand operation

Kondisi: bekas, Mesin Press Bending Hidrolik CNC - ADRIA 40/400 Spesifikasi teknis: Panjang tekuk maksimum: 4.100 mm Gaya tekuk: 400 ton Tekanan kerja maksimum: 300 bar Perkiraan berat: 24.000 kg Jarak minimum antara pengaman cahaya dan alat: 180 mm Daya motor: 30 kW Kontrol CNC: Esa Kwodpfx Asxw T Sfea Njt Mesin sesuai dengan standar CE

Kondisi: bekas, tinggi total: 2.750 mm, lebar total: 3.250 mm, panjang total: 3.100 mm, gaya penekanan: 150 t, lebar meja: 1.645 mm, panjang meja: 3.000 mm, kecepatan operasi: 5 mm/dtk, berat keseluruhan: 6.000 kg, kecepatan mundur: 30 mm/dtk, tinggi kerja: 700 mm, panjang langkah: 500 mm, HYDROGARNE HYDRAULIC PRESS SERIES T Model: T-150 STANDARD DESCRIPTION: Specially designed for straightening welded structures and oxy-cut steel plates. Its design facilitates the loading and unloading of large-scale parts, plates, or structures. It allows access to different pressing points without the need to move the workpiece, thanks to the cylinder's lateral travel and the longitudinal movement of the bridge. Double-acting cylinder Two-speed motorised hydraulic unit Glycerine-filled pressure gauge with reading in tonnes Electrical panel with PLC Operation performed by a low-voltage pendant control station Complies with all essential health and safety requirements under CE regulations STANDARD FEATURES: MODEL T-150 Pressing force 150 t Motor power 11 kW Working speed 5 mm/s Approach speed 9.9 mm/s Return speed 30 mm/s Piston stroke J 500 mm Lower table 1,640 x 3,000 mm Ram lateral travel C 1,150 mm Kwodpfsybbymsx Aa Nst Bridge longitudinal travel D 2,150 mm Front opening A 1,700 mm Vertical opening B 300 mm Working height E 700 mm Total frontal G 3,100 mm Total lateral H 3,250 mm Total height I 2,750 mm Weight 6,000 kg

Kondisi: diremaj di bengkel (bekas), NR.01 Three-cylinder hydraulic press BIGNOZZI Capacity: 200 Ton Completely overhauled Table size: 1550 x 1050 mm Daylight opening: 1000 mm Ram stroke: 500 mm Kodpehnc R Iofx Aa Newt Table height: 1180 mm Dimensions: 2900 x 1700 x 2900 (h) mm Weight: 10 Ton

Kondisi: bekas, Tahun pembuatan: 1966, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, VEB Wema Zeulenroda Kodpfjx Srnqox Aa Njwt

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2089, tinggi total: 5.000 mm, tinggi meja: 1.000 mm, lebar total: 3.000 mm, gaya penekanan: 250 t, berat keseluruhan: 25.000 kg, MIB HYDRAULIC PRESS Kwedjv Hbh Repfx Aa Njt YEAR: 01/2000 CAPACITY: 250T MACHINE TO BE RECOMMISSIONED, COMPLETE

Kondisi: baru, dehu-001 Kodpfx Aswirbrja Nowt

Kondisi: baru, 1 Kwjdowirl Rjpfx Aa Nst

Kondisi: baru, Zustand neu Lieferzeit ca. 10 Wochen ab Auftrags Ursprungsland Türkei Preis 86300 € Leasingrate 1631.07 € Presskraft 150 to Hub 300 mm Stößel 950x650 mm Tisch 1200x750 mm Einbauhöhe 550 mm Eilgang 100 mm/s Arbeitsgeschwindigkeit 5,5 mm/s Rückzugsgeschwindigkeit 165 mm/s Kedpfswiq Tysx Aa Newt Motor 11 kW Länge 2200 mm Breite 2200 mm Höhe 3250 mm Gewicht 8200 kg 4-fach Stößelführung Tisch und Stößel mit T-Nuten Manuelle Hubverstellung über Nockenschalter Manueller und automatischer Betrieb Lichtschranken Ausrüstung gemäß CE Vorschriften

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 500 mm, gaya penekanan: 160 t, lebar meja: 1.250 mm, Power: 160 to --- Working length: 1250 mm Stroke: 250 mm Throat depth: 500 mm Maximum installation height: 480 mm Weight approx.: 11.2 t Power: 30 kW Application area: Universally applicable machine for straightening / bending / pressing / folding, etc.--- Previously used as a press brake Kwedpfx Aajx Nxrwo Not with system tool holder + tools .

Kondisi: baru, nomor mesin/kendaraan: DF0189, Pressure: 500 t Clear width: 1200 mm Stroke: 400 mm Approx. machine weight: 40 t Dimensions (L x W x H): 2800 x 1750 x 4350 mm Return force: 50 t Motor power: 50 kW Max. working height: 800 mm Max. advance speed: 0 - 10 mm Pressing speed: 0 - 10 mm/sec. Travel path: 400 mm Ram plate: 1000 x 1000 mm Table plate: 1200 x 1200 mm Table height above floor approx.: 1200 mm Oil tank: 700 l Kwodsfxykaepfx Aa Njt

Kondisi: baru, Draw cushion press force: 30 tons Kwjdpfx Aod Ab Ilea Nst Draw cushion return speed: 52 mm/s Draw cushion stroke: 200 mm Installation height: 750 mm Pressure: 150 bar Stroke: 500 mm with draw cushion Light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating 4-way ram guides Clamping plate with T-slots Manufactured in accordance with CE regulations (Symbolic photo) Press force: 150 tons Pressure: 254 bar Table dimensions: 1200 x 750 mm Ram dimensions: 950 x 650 mm Table bore: 120 mm Stroke: 500 mm Installation height: 750 mm Rapid traverse: 100 mm/s Working speed: 5.5 mm/s Return speed: 165 mm/s Motor: 11 kW Draw cushion: Press force 32 tons; stroke 200 mm; pressure 160 bar; return speed 40 mm/s Dimensions: 540 x 720 mm Length: 2,225 mm Width: 1,600 mm Height: 3,850 mm Weight: 10,000 kg