Beli Gergaji bundar meja bekas (34)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Mesin pemotong pinggir, planer, gergaji multi-blade MADREW DCKWW 300/15 Tahun produksi: 2014 Mesin berfungsi dengan kondisi teknis yang sangat baik. DATA TEKNIS: Daya Motor Poros Gergaji: 15 kW Rentang pengaturan kecepatan maju kontinu: 6,0 ÷ 35 m/menit Jarak antar pisau (lebar papan): 20 ÷ 300 mm Jumlah maksimum pisau gergaji yang digunakan: 4 Diameter pisau yang dapat digunakan: Ø 250 ÷ Ø 400 mm Tinggi pemotongan maksimum: 120 mm Panjang papan minimum: 1000 mm Mesin dilengkapi dengan sistem pengunci dan pengaman yang memastikan kerja aman dan bebas gangguan: Itsdpfx Aox A Sfnea Njb - Indikator koneksi fasa yang benar dan indikator hilangnya fasa, - Indikator kelebihan beban mesin akibat: mata gergaji tumpul atau kecepatan maju yang terlalu tinggi.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Cross-cut circular saw with 2 x double shafts. Vertical and horizontal. For cutting battens, strips, laths, and separation cuts. With narrow kerf. Max. cutting height: 200 mm. Max. cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed rate with frequency control from 0 - 40 m/min. 8 pairs of driven rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with control system. Saw bushings and tools included. Sound-insulated operator cabin. The machine is in very good condition and was only used occasionally. There is no visible wear on the feed rollers. Not in operation for the past 12 years. Mechanisation: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated cross discharge conveyor. With adjustable feed gearbox. The mechanisation is older. Electrical control cabinet with control system. Multi-blade saw Gubisch Grimme Iedsx Ap Dzspfx Aa Netb Cross-cut multi-rip saw Multi-blade saw for lamellas Circular saw for cross-cutting with 2 double shafts. Vertical and horizontal. For cutting battens, strips, laths, separation cuts. With narrow cutting line. Max cutting height: 200 mm. Max cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed rate frequency-controlled from 0 - 40 m/min. 8 pairs of driven rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electric control cabinet. Saw bushings and tools included. Sound-insulated cabin. The machine is very well maintained and was only used sporadically. No visible wear on the feed rollers. Not used for 12 years. Mechanisation: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated cross scraper conveyor. With adjustable feed gearbox. Mechanisation is older. Electric control cabinet with control system.

Kondisi: baru, Tahun pembuatan: 2025, lebar pemotongan (maks.): 280 mm, ketinggian potong (maks.): 48 mm, diameter mata gergaji: 168 mm, lebar potong di pagar rip: 280 mm, Festool Gergaji Meja Baterai CSC SYS 50 EBI-Set Tegangan baterai 36 Volt, Kecepatan tanpa beban 4.500 - 6.800 rpm, Dapat dimiringkan dari -10° hingga +47°, Tinggi potong 0 - 48 mm (pada 45° = 34 mm), Pengaturan ketinggian dan kemiringan elektrik dengan tampilan digital Lebar potong paralel maks. 280 mm, Meja geser dengan lebar potong melintang hingga 450 mm, Pembatas sudut kemiringan 0 - 70°, Lengkap dengan: Pisau gergaji bundar 168 x 1,8 x 20 mm, Z = 42 WD, Penghenti paralel, tongkat dorong, penghenti sudut, Kantong debu, pisau belah untuk pemotongan tersembunyi, pisau belah dengan penutup pelindung, kunci L SW 6 mm, Energy set SYS 18 V 2 x 5,5/TCL 6 DUO, Rangka bawah UG-CSC-SYS No. produk: 577379 dari stok Seevetal, promosi hingga akhir 2025, Iodoxzudqspfx Aa Nstb selama persediaan masih ada, tidak termasuk biaya pengiriman dan kemasan

Kondisi: bekas, GRAULE AGT gergaji lingkar tarik dan meja Iodpfx Aexf Tr Usa Nstb

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 1.200 mm, ketinggian potong (maks.): 70 mm, diameter mata gergaji: 125 mm, tinggi total: 1.300 mm, panjang total: 6.000 mm, tinggi potong dengan pisau scoring (maks.): 2 mm, diameter nosel ekstraksi: 250 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, lebar yang dibutuhkan: 3.000 mm, persyaratan ruang panjang: 6.500 mm, frekuensi input: 50 Hz, diameter utama gergaji: 350 mm, berat keseluruhan: 3.500 kg, kecepatan rotasi (maks.): 3.800 rpm, panjang pemotongan (maks.): 4.200 mm, panjang pemakanan sumbu X: 4.500 mm, kecepatan pemakanan sumbu X: 7 m/menit, lubang collet: 75 mm, kecepatan mata gergaji: 3.800 rpm, penggerak gergaji: 7.500 W, tahun perombakan terakhir: 2024, Longitudinal saw, also suitable for cross-cutting. It is particularly well-suited for edging lumber slabs and subsequently cutting to width prior to planing. This machine makes ripping much easier compared to conventional saws, even those equipped with a carriage. It can operate in automatic or semi-automatic cycles. The unit offers four position settings for the saw aggregate depending on the element length, meaning the aggregate does not need to return all the way to the end of the machine, thereby reducing cutting time. It significantly facilitates and accelerates the handling and preparation of lumber for planing, with straight cuts allowing for time savings during subsequent planing. Operation is relatively safe, as the operator does not have direct contact with the material during the cut—the workpiece is clamped from above by a pressure beam with pneumatic actuation. The pressure beam and saw aggregate feed are controlled via a foot pedal. The machine is also adapted for cutting panels with a scoring unit. It comes equipped with accessories for various applications. Ideally suited for small and medium-sized carpentry workshops processing thick, massive lumber. The machine is heavy-duty and durable. Itedpfx Ajuyvnija Nob

Kondisi: bekas, de Ijdeu Dhupepfx Aa Netb

Kondisi: bekas, de-DE: Vielblattsäge - Säge zum Ablängen von Brettern. - Hersteller: omega T55 300 Itedpfjtq Eblex Aa Nob - Baujahr: 1996 - Elektromotor - Betriebsstundenzähler

Kondisi: bekas, USED STROMAB RADIAL SAW Itodswr T Hbspfx Aa Neb

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Gergaji format, mesin kombinasi gergaji-router TRIUMPH T3000 Spesifikasi: • kondisi – bekas, setelah perawatan • produsen – TRIUMPH • model – T3000 • panjang sliding table: 320 cm • scororing saw pada motor terpisah • motor utama gergaji: 4,0 kW • motor router: 4,0 kW • motor scorer: 0,7 kW • spindle router diameter 35 mm Itodpfx Aasw Snbxj Nob • spindle blade utama diameter 35 mm • kecepatan router variabel (menggunakan sabuk) • pengangkatan dan penurunan blade manual • konektor hisap 120 mm • berat sekitar 900 kg • dimensi transportasi: 330 x 120 x 110 cm (p x l x t) Informasi tambahan: • kondisi teknis pabrik yang baik • foto yang ditampilkan menunjukkan kondisi aktual barang • dapat dinyalakan dan diperiksa di tempat

Kondisi: bekas, Circular saw is in working condition, top frame is moving. Can saw in angle. Iedjgrkb Dspfx Aa Nstb

Kondisi: bekas, Die Säge ist funktionsfähig. Ijdpfx Ajgrkb Sea Nstb

Kondisi: baik (bekas), cutting height 120 mm Itedpfx Aajwm Swns Nsb main motor 11 kW infinitely variable feed speed double-blade (or twin-blade)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1993, multirip saw with movable Linck saw blade hood; saw with a hydraulically-operated floating blade Itodelwp Diopfx Aa Nob

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1979, Raimann saw height: 90 mm, chain width: 250 mm, after overhaul. The machine has undergone a complete refurbishment. Motor: 22 kW. Cutting width: 250 mm. Shaft diameter: 80 mm. Main drive from the motor to the shaft via flat belt. Itodoh Rv Eyepfx Aa Njb

Kondisi: bekas, Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Connection rating: 380V, 3.0kW, 6.7A Weight: approx. 300 kg Cutting width: 900 mm Table extension: custom-made Sliding table Angle stop fixed at 90° Saw blade guard PSV, custom-made Unit tiltable to 45°, manual Height adjustment manual Extraction port: 100 mm Parallel fence missing Isdpfx Aasq Au N Es Njtb Ruler stop missing

Kondisi: baru, en-GB Itodpfevxr Skex Aa Nsb

Kondisi: bekas, Tahun pembuatan: 1998, Used, good condition. Manufacturer: Kölle, Model: KS 340, Year of manufacture: 1998, CE type tested. Equipped with a parallelogram cross table, digital display for: parallel fence, angle fence, and parallelogram table. Table length approx. 3115 mm, cutting width approx. 1000 mm, tiltable up to 45°, scoring unit, extraction connection diameter 120/80 mm. Required space approx. 3300 mm x 1900 mm x 1600 mm. Location: 97447 Gerolzhofen, loaded free on truck, unpacked. Sold in as-is condition as inspected, without guarantee or warranty. Itsdpfx Aaevxr Tbo Neb

Kondisi: baru, The worktable is made of heavily ribbed cast iron and the base frame of welded steel, ensuring torsional rigidity and vibration-free operation. This is a premium-quality machine at a true entry-level price. Unique in its performance class: - Format sliding table made from anodized aluminum for maximum cutting precision - Cutting plane directly at the saw blade - Tiltable saw blade unit from 90–45° - Table extension arm with aluminum crosscut fence and adjustable flip stop for panels and large workpieces - Parallel fence with round bar guide and fine adjustment - Powerful motor - Made in Europe Dimensions and weights Net weight (approx.): 170 kg Dust extraction connection Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 60 mm Transport width: 680 mm Working area: 1600 mm x 2300 mm Footprint required: 2613.5 mm x 2134 mm Please add the given dimensions to the footprint to ensure the recommended installation space for the machine. The dimensions account for maximum travel distances or usable lengths. Electrical data Connection voltage: 400 V Drive motor: 1.8 kW Phases: 3-phase Rated operation mode for drive motor: S6 Current type: AC Duty cycle for drive motor: 40% Isdpfx Asvxr S Rja Notb Mains frequency: 50 Hz Sliding table and worktable Format sliding table: 1140 mm x 200 mm x 70 mm Worktable: 1024 mm x 224 mm x 900 mm Circular saw unit Cutting width with parallel fence: 700 mm Max. cutting height at 90°: 67 mm Max. crosscut width left of saw blade: 1200 mm Max. cutting height at 45°: 40 mm Edging length: 1200 mm Saw blade diameter: 250 mm Saw blade tilt: 90–45° Saw blade speed: 3900 min¯¹ Scope of delivery Table extension Anodized aluminum format sliding table Parallel fence with round bar guide and fine adjustment Aluminum flip stop Excenter clamp Art.-No. 5504113