Gergaji potong silang optimasi

SALVADOR SuperCut 500

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Bodpow Sy T Hsfx Aa Tswi Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: sangat baik (bekas), Independent machine – universal machine (first & second position in a production line) Electronic control – EasyLing programmer Safe and soundproof enclosure No. 3+3 vertical columns for supporting the processing units Min. usable working width (mm): 240 Max. usable working width (mm): 3,100 Min. usable working thickness (mm): 3 Max. usable working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), infinitely variable (m/min): 4 – 24 Total power No. 4 processing units (for each side of the machine): Scoring unit Bodpjwhmdfofx Aa Tswi Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0–90°

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Nagelneue Friulmac EQ 004 2.5 mit Zufuhrband und Aufgabe-Trichter Touchscreen-Bedienung und automatische Verstellung Bearbeitungslänge: min. 190 mm – max. 2.500 mm Bearbeitungsbreite: min. 30 mm – max. 250 mm Materialstärke: min. 12 mm – max. 35 mm Vorschubgeschwindigkeit: 6 – 25 m/min 2 x 2 Hobelaggregat: 3 kW – 720 U/min Hauptprofilieraggregat: 4 kW – 7.200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden. Bwsdpfjvupm Dox Aa Tei

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m Bwedpfxowclkys Aa Tji - Separation and zero saw - Conveyor belt for residual wood disposal - Stacking unit - Strip magazine not included in the sale - Package cross conveyor The machine is in very good condition, very little used The machine is still installed but available immediately

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Bjdpom Ew Stofx Aa Towi Diameter of face plate: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.7 rpm.

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° Bsdpfx Aaeh Ayyqj Tjwi - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1999, Fungsionalitas: tidak berfungsi, Mesin prisma Storti 4x35 HP Masuk rol Keluaran Kabinet kontrol Bodpfx Ajlxqk Rsa Towi Mesin untuk restorasi

Kondisi: baik (bekas), Tahun pembuatan: 2001, 1 Bwedpfei U Dxusx Aa Tji

Kondisi: baik (bekas), Tahun pembuatan: 2010, X Y Z: 1270 x 508 x 508 mm, meja 1324 x 457 mm, 12000 rpm, BT 40, Kontrol HAAS, ATC 24 stasiun, 40HP, auger chip, pendingin, meja trunnion 5-sumbu Haas TR210. Bedpfxexpw Rvj Aa Tswi

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit • Ionization Bedpfxeidi Ivo Aa Tjwi