Gergaji potong di bawah meja

SALVAMAC Legend 400

Kondisi: baru, Perlengkapan: pencahayaan, Take your painting process to the next level – with mobile convenience. Mobile paint booths in container design for painting and coating a wide variety of objects. They are specifically engineered for mobility, allowing for easy transport and rapid deployment on different worksites. The cabin is typically equipped with a ventilation system to ensure air quality, integrated lighting, and a filtration system that prevents paint mist from escaping. The ventilation system ensures that vapors and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Gbjdpfjun Shgsx Adteg Mobile paint booths provide a practical and flexible solution for companies that need a relocatable, effective painting system, easily transported from one construction site to the next. Overview of design and features Our mobile 20-foot Sapi painting containers feature a robust steel framework with welded wall and ceiling panels. Inside, we can install specialized equipment such as cranes or lifting devices. The floor is made from checkered steel plate. Both door panels include ventilation grilles fitted with fine-pore filter mats. One panel is designed as an escape door for safety reasons and features a viewing window. It is important to note that these are not simply converted shipping containers—we manufacture all our containers from the ground up, using only the most durable materials that meet all requirements and have been tested and proven for safety. Standard shipping containers would not meet the required safety standards. Paint mist extraction system in the mobile painting container The paint mist extraction wall for overspray separation is installed in front of the rear wall and equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with guide plates, including various hanging and fastening elements for filter installation. On the exterior rear side of the container, a high-performance, ATEX-certified extraction fan with drive motor is installed on a mounting console. Next-generation mobile paint booths: meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU standards. Accommodating modern coatings such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica coatings imposes stringent requirements on existing painting booths. This is why we have developed a new and unique mobile paint booth to support the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, humidification or air drying, condensation drying using low-temperature techniques or hot air drying, or pre-treatment of workpieces by high-pressure washing with water recirculation, compressed air blasting, or turbine wheel blasting technology, we offer the optimal solution.

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Swivel adjustment with crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Gbsdeizkhvepfx Adteg Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Bialbero Multiblade Saw mod. SQUALO 420 2x75kW - Refurbished as New with Warranty - € 65,000.00 Year: 2018 Technical data: - Infeed roller width: 420 mm - Outfeed roller width: 520 mm - Max saw group width: 400 mm - Max cutting height: 200 mm - Min working length: 800 mm - Max passage width: 700 mm - Saw spindle diameter: 60 mm - Max circular saw blade diameter: 370 mm Gbsdpfx Adshrdxietsg - Saw blade bore diameter: 80 mm - Saw spindle speed: 3,800 rpm - Feed speed via rollers: 4–36 m/min - Weight: 5,500 – 6,000 kg - Overall dimensions: 2500x2260x2000h mm

Kondisi: bekas, WEINIG Profimat 26 Super Planer/Moulder Working width: 20 - 230 mm (260 mm) Working height: 8 - 120 mm (140 mm) 5 working spindles, spindle diameter 40 mm Long infeed table (approx. 2000 mm) Bottom spindle: 4 kW / Left and right spindles: 7.5 kW each / Top spindle: 5.5 kW / Bottom finishing spindle: 5.5 kW Pneumatic pressure for feed rollers Cardan shaft feed, infinitely variable: 5 - 24 m/min Gsdpfx Aewqda Njdtjbg Infeed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts Machine in CE-compliant design Year of manufacture: 2001 Sold without processing tools Machine is WORKSHOP OVERHAULED and in GOOD CONDITION The machine is connected and ready for demonstration in the exhibition center Available from stock Lieboch

Kondisi: sangat baik (bekas), Stehle S820 (automatische Gerade-Messerschleifmaschine). Bitte prüfen Sie Ihren Spam-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten! Technische Daten: • Max. Werkzeugbreite: 330 mm • Werkzeugdurchmesser für Hobelköpfe (Messerwellen, min.-max.): 120 - 230 mm • Schleifscheibendrehzahl: 2.850 / 5.750 U/min • Schleifen von 2 bis 12 Messern pro Kopf möglich (mit Indexplatte) • Indexplatten für 4, 6, 8, 10 und 12 Messer im Lieferumfang enthalten • Antriebsleistung Schleifscheibe: 1,3 kW Gbjdpfxeq Dzkuo Adtog • Freiwinkel: 10 - 35° • Kühlmitteltank: 125 l • Motorleistung Kühlmittelpumpe: 0,28 kW • Anschlusswerte gesamt: 2 kW Bitte prüfen Sie Ihren Spam-Ordner, falls Sie innerhalb von 24 Stunden nach Absenden Ihrer Anfrage keine Antwort erhalten!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 700 mm, ketinggian potong (maks.): 250 mm, tinggi kerja: 850 mm, daya: 7,5 kW (10,20 hp), We are offering 1 x JRIMAC Underslung Crosscut Saw UKS 1.000 for sale. Crosscut capacities: 60x940mm, 140x820mm, 180x720mm, 220x520mm, 240x340mm Maximum cutting height: 260mm Saw blade diameter: 700mm Working height: 850mm Gbodpfx Adjrfudrjteg Extraction ports (above and below): 160mm - Infinitely variable, pneumatic feed rate - Hydraulic brake cylinder for consistent stroke speed - Pneumatically controlled workpiece clamping device - 2-hand control with protective shield for cutting activation - Roller conveyors and stop systems available on request

Kondisi: baru, Step-by-Step Painting Systems Elboy Industrial Solutions designs and manufactures a broad range of paint shops tailored to your products. With ELBOY, you can use virtual reality during the design phase to navigate through your facility, allowing you to implement desired modifications at this early stage and avoid unexpected outcomes later on. We provide engineering and manufacturing services for your application, with particular emphasis on environmental protection and occupational safety across processes such as sandblasting, filling, washing, priming, and top-coating for all product sizes. Step by Step systems are available with overhead conveyors or floor conveyors and can be configured to accommodate products of any size. Booths for sandblasting, chemical washing, pre-coating, drying, filling, top-coating, and curing can all be integrated into the system. To carry out the processes specified by the system in sequential steps, automatic doors open upon completion of each process, and the product automatically advances to the next processing station. These fully automated systems are operated via a 15-inch touchscreen and offer various reporting options, such as main computer monitoring, product reporting, outcome reporting as required, and remote control. These are paint shops that are engineered and manufactured by our specialists according to your capacity, operational requirements, and other specifications. For requirements such as electrostatic powder coating, wet coating, sandblasting, painting, coating, washing, and similar systems, maximum efficiency is achieved with minimal staffing and optimal use of space. Gjdody Dw Aepfx Adtjbg

Kondisi: baik (bekas), de-0456 Godpfx Adown H Iwetjbg

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height at 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An on-site inspection is possible. Gsdpfx Adjurwy Aetebg

Kondisi: bekas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Gjdpfx Adjv Uq Tljtobg Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The Semi-automatic Under-table Cross-cut Saw ----- Maximum cutting area: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, maximum height: 100 mm. The structure is made entirely of thick-walled, fully reinforced and painted steel. Solid floor mounting system with flanged steel feet for the fixing hole. Two-handed safety cutting control in ergonomic position. Saw motor power: 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustment options for adaptation to various processing types. Durable and easily replaceable saw blade adjustment bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Press movement system via innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must, as standard, be equipped with at least 1 meter long feed tables/roller conveyors at both the infeed and outfeed sides. Technical Data: ----- Maximum saw cross-section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Suction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V/50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. The spaces between rollers are enclosed with painted steel. Including side guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm ----- Total price ex-works: on request! ----- Image and video not original, show an identical model. Further options such as longer infeed/outfeed, stop systems available on request! (Technical data according to manufacturer, subject to change!)