Schiepe mesin penumpuk otomatis

Schiepe Stapelautomat SA6V-12/3 RGM

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang umpan sumbu Y: 6.000 mm, Tipping trough for logs up to 6 m in length. Available from September 2024. Gisdpjr Iig Dofx Adtel

Tahun pembuatan: 1988, Kondisi: perlu perbaikan (bekas), Mekanisasi untuk di depan mesin serut untuk KVH/BSH – untuk panjang hingga sekitar 13 m. Instalasi KVH+BSH ideal untuk di depan mesin serut. Pemisahan memanjang – pemisahan satu per satu. Gergaji potong melintang: 4 buah gergaji bundar yang dapat disetel samping. Penampang potong: 180 x 220 mm, 150 x 300 mm. Satu operator sudah cukup. Giedpfx Adevbtpstel

Kondisi: sangat baik (bekas), Planer/Moulder 9 heads Working width: 20 cm Working height: 22 cm 5 feed rollers in the table Heads: 1 bottom 7.5 kW Gjdpfx Aetrdwtsdtsil 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 top 11 kW 6 bottom 11 kW 7 top 11 kW 8 bottom 11 kW 9 universal 11 kW PERFECT CONDITION!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007,

Tahun pembuatan: 2023, Kondisi: baru, Maximum chopping height: 200 mm Infeed width: 500 mm Number of feed rollers: 3 pcs Rotor diameter: 600 mm Chopping length approx.: 20-30 mm Giedpfxoncd Azs Adtel Output capacity: 16–20 cubic meters/hour wood chips Number of chopping knives: 2 pcs Feed motors: 2 x 2.2 kW Net weight approx.: 4100 kg Infeed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversized roller bearings Bearing housing: steel, flange housing Feed rollers: steel, specially toothed Chip discharge: below the machine Machine grate: (screen) for re-shredding overlength chips Drive pulley: matched to main motor, N=1500 rpm Hydraulic system: comprises hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: by 2 geared motors, manufacturer NORD GETRIEBE

Kondisi: bekas, Tahun pembuatan: 2004, WEINIG GRECON DOUBLE-END FINGER JOINTING LINE MOD. PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scoring saw: 5.5 kW - Year: 2004 CE Giodpfx Aswry I Eedtol

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 24 h, kapasitas angkut: 3.000 kg, tinggi angkat: 6.000 mm, pengangkatan bebas: 1.718 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.643 mm, lebar kerangka garpu: 1.750 mm, panjang garpu: 1.200 mm, berat kosong: 5.814 kg, panjang total: 1.600 mm, jenis penggerak: Elektro, lebar konstruksi: 1.540 mm, Vierwege Seitenstapler Lastschwerpunkt: 600 Gabelbreite: 125 mm Gabeldicke: 50 mm ISO Klasse: ISO Klasse 3 = 2.500 - 4.999 kg Masttyp: Triplex Zustand Technisch: sehr gut Bereifung vorne Typ: Vollgummi Bereifung vorne Grösse: 406 x 176mm Bereifung vorne Zustand: 80 - 100% Bereifung hinten Typ: Vollgummi Bereifung hinten Grösse: 559 x 254mm Bereifung hinten Zustand: 80 - 100% Batterie Volt: 48V Batterie Ah: 930Ah Batterie Baujahr: 2025 Batterie Zustand: Neu integrierter Seitenschieber (+/- 100mm) hydraulischer Gabelpositionierer (geschlossene Breite 290 mm, maximale offene Breite 1750 mm) (von außen nach außen bei Gabeln) 3. Ventil, 4. Ventil, Arbeitsscheinwerfer hinten, Arbeitsscheinwerfer vorn, Heizung, Vollkabine, Vollfreihub, CE Zertifikat, Safety Light, Gijdpfxev Tf Arj Adtol LED-Arbeitsscheinwerfer ( 2 nach vorne und 2 zur Seite) Blinkleuchte Rückfahrwarner Farbe: Combilift Hi-Vis-Grün (RAL 6018) und Grau Hilfshydrauliksteuerventil mit 2 Schläuchen, die am Gabelträger enden

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Giedpfsu Agh Sex Adtjl Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Tahun pembuatan: 2013, Kondisi: bekas, Drying chamber with intermediate ceiling ventilation and front-end wagon loading for production and conditioning of 3 mm oak lamellae, from initial moisture content 12 up to max. 15% / final moisture content 7%. Used, good condition Manufacturer: Mühlböck Model: ZSWM2110-1180C – 1.0 l/h at 40°C above 30% RH Year of construction: 2013 Rated power: 7 kW/15A Frequency: 50 Hz Control voltage: 24VDC/230VAC Protection class: IP54 Contents: The chamber accommodates - 2 stacks widthwise at 1.10 m each, with 0.20 m spacing - 1 stack heightwise at 1.80 m, on 0.10 m thick bearers, plus 0.10 m clearance - 2 stacks lengthwise at 2.20 m each, plus 0.60 m clearance Godpfx Aevwfhiedtjil The chamber contains 4 stack packages and a gross total volume of 17.4 m² The chamber holds a net 4 m³ of wood — with a wood thickness of 3 mm and stacking strip thickness of 10 mm, and 90% width utilization with edged wood. Usable internal chamber dimensions: width 2.40 m x height 2.30 m x length 5.00 m - Aluminum cassette construction - Aluminum frame - Dimensionally stable rock wool insulation - Aluminum trapezoidal sheet cladding - Snow load: 100 kg/m² - Double-leaf hinged door - Front-end loading - 2 fans, each 3 kW (D=800 mm) - Stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature 80°C, return 73°C - Servo-controlled supply and exhaust air dampers - Cold water spray system - Chambers operate fully automatically - Computer control K5 Dismantling: at customer site Delivery as-is, as inspected Without guarantee or warranty

Kondisi: bekas, Die Stenner VH105 Doppelbandsäge verfügt über zwei bewegliche Sägeblöcke, von denen einer hinter dem Vorschubsystem positioniert werden kann. So ist es möglich, entweder mit nur einem Sägeblatt zu schneiden oder das Holz durch die Säge zu führen, ohne zu sägen – beides ohne das Sägeblatt auszubauen. - Hersteller: Stenner Gjdpfx Adjtp E Uzjtoil - Modell: VHET105 - Durchmesser der Sägebandrollen: 1050 mm - Sägebandbreite: 130 mm - Vorschubgeschwindigkeit: 10–80 m/min - Abstand zwischen den Sägen: 5 mm - Maximaler Abstand zwischen den Sägen: 400 mm.