Pengangkat vakum Schmalz VWT 150-180-4 2007

Schmalz VWT 150-180-4

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, I am selling a 2-head UV curing tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Year of manufacture: 2015. Available immediately. Laedjffk Etopfx Am Eeh Requires repair: display, power supplies for both UV units.

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Lasderb D Njpfx Am Eoh Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), lackierkabine-diana-serie Ledpfx Ameygum Rs Eeah

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C24V5177, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, berat keseluruhan: 1.400 kg, Very little used exchanger, pallet inverter in perfect condition. Enables rotating a loaded pallet, swapping the pallet, and placing the load onto a new pallet. Designed for exchanging plastic pallets for wooden ones or replacing a damaged pallet with a new one. Lasdpfevahymjx Am Eoh We can also record a video of it in operation for you.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Perangkat pengangkat vakum, pengangkat vakum dari Schmalz untuk pelat berat dengan karet penghisap baru. Kapasitas angkat 150 kg secara horizontal dan vertikal. Penghisap dapat diputar 90 derajat secara elektrik. Kotak penghisap 1000 x 675 mm. Sinyal peringatan akustik jika vakum terlalu rendah. 400V, 1,5kW. Dapat dipasang pada rantai pengangkat yang sudah ada. Tanda CE. Tidak ada buku pengujian. Karet penghisap diganti baru. Kondisi seperti baru. Lasdpfxjv S Syne Am Ejh Mesin ini dapat diperlihatkan di lokasi kami setelah perjanjian sebelumnya. Kami hanya menawarkan mesin yang tersedia di gudang kami dan siap untuk demonstrasi, lihat "penawaran lainnya dari penyedia ini".

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), 2 Laodpfx Ajygu Smsm Esh

Kondisi: baik (bekas), Tahun pembuatan: 1990, jenis arus masuk: tiga fasa, KUPER SHRINK TUNNEL DUPLEX Manufacturer: Küper Model: ST/I-1400 Year of manufacture: 1987 Serial number: 594 Working width: 1300 mm Roll holder: Yes Electrical connection: 400 V Overall height: 3500 mm Overall width: 2350 mm Overall depth: 1850 mm Incl. 2 air blow-off units Power: 59 kW Temperature range: 230 °C Continuous conveyor belt Conveyor speed: 5 m/min Duplex 2100/650 film feed station incl. film holder Laedpfxekn Rz Hs Am Eeh Swivel arm with chain hoist Sealing bar Length: 2100 mm "Siemens" control panel Overall dimensions: 3000 x 2000 x 2300 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Derek putar tiang, derek gudang, derek untuk area kerja -Produsen: Abus, derek putar tiang tipe LS -Dokumentasi: Buku pemeriksaan derek tersedia -Pelat dasar: 600 x 600 mm -Kapasitas angkat: 500 kg -Rantai pengangkat: Abus tipe GM 2 500.4-2 -2x kecepatan pengangkatan: 4,0/1,0 m/menit -Jangkauan: 3000 mm -Tinggi keseluruhan: 4180 mm -Tinggi kait: 3100 mm -Rentang putar: 270° -Dimensi pengangkutan: 4180/800/T710 mm Ljdpfx Aez A R H Iem Ejah -Berat sendiri: 428 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.600 mm, panjang total: 11.200 mm, lebar total: 5.100 mm, jenis arus masuk: tiga fasa, masa garansi: 24 bulan, tinggi dalam: 4.970 mm, panjang dalam: 11.000 mm, suhu: 80 °C, lebar dalam: 5.000 mm, kebutuhan udara: 52.000 m³/jam, tegangan masuk: 380 V, kapasitas pemanasan: 250 kW (339,91 hp), daya: 45 kW (61,18 hp), bahan bakar: gas petroleum cair (LPG), frekuensi input: 50 Hz, konsumsi energi: 45 kWh, ketebalan isolasi: 50 mm, daya nominal: 250 kW (339,91 hp), ketebalan pelat baja (maks.): 2 mm, Perlengkapan: pencahayaan, * Air Treatment Unit: The air treatment unit is a recirculation system that supplies the booth with filtered fresh air and exhausts used air during the painting process. It heats the air to 60°C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before returning it to the booth. The air is heated by a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air undergoes dual filtration (through front and ceiling filters) before entering the booth. The contaminated air is also filtered twice (via inlet and outlet filters) before leaving the exhaust unit. Air treatment units are insulated like the side panels to minimize heat loss and are protected against potential vibrations and noise by rubber seals on the covers. The exhaust air is regulated by a damper in the air outlet duct, which helps to control the internal pressure of the booth. *PRINCIPLE OF OPERATION OF THE BOOTH: The processes in the booth are controlled via an operator panel that manages the following steps: *PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through the front filters before entering the plenum at ambient temperature. The air is then discharged through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before being released. *FLASH-OFF PROCESS: After painting, the booth continues to operate for about 15 minutes to expel residual solvents and thinners. During this stage, fresh outside air circulates within the booth. *DRYING PROCESS: In this phase, 80% of the air circulating through the booth is heated to 60°C and delivered into the booth via a plenum. As 20% of the solvents are released during drying, this solvent-laden air is exhausted. Industrial coatings are generally dried at 60°C, but the booth temperature can be adjusted as needed via the operator panel. *COOL-DOWN PROCESS: After the 30-minute drying process, the coil is deactivated via the operator panel, the pneumatic damper closes, and the exhaust system restarts. During the 5-minute cool-down period, fresh outside air circulates in the booth, after which the system shuts down automatically. Laedpfx Aewzl Hxem Eoh ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of the machines and equipment within the booth. The control panel is made of durable galvanized sheet metal and steel profiles, fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel includes essential components such as contact breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow the booth to be relocated if necessary. • Operating equipment uses 380 V 50 Hz, while control equipment uses 220 V.

Kondisi: bekas, Tahun pembuatan: 2002, Pengering UV, Cefla UV 2000 - Produsen: Cefla/Sorbini - Tipe: UV 2000 M2 / TN3000 - Tahun Pembuatan: 2002 Lsdpfsyifwpsx Am Ejah - Lebar Kerja: 1.300 mm (1.445) mm - Tinggi Kerja: 900 + - 40 mm - Sisi Pengoperasian: Kanan - Tinggi Maksimum Benda Kerja: 70 mm - Jumlah Lampu dari Atas: 2 buah - Lampu Dipasang Miring: 2 buah - Cocok untuk Lampu Merkuri - Cocok untuk Lampu Galium - Daya Lampu Maksimum: 120 W/cm - Sistem Konveyor Sabuk - Panjang: 3.000 mm - Lebar: 2.300 mm - Tinggi: 1.500 mm - Volt, Hz: 400 / 50 - Total Sambungan Listrik: 86 A / 36,4 kW - Fluktuasi Tegangan Maksimum: +/- 5 %