Pelapis SCM s 52es

SCM MiniMax s 52 es

Kondisi: hampir baru (bekas), Dual-shaft multi-blade saw A. COSTA PUMA 2/50 350/160 – Italian manufacturing TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm Ndedpfx Ajqy E Rlob Eed main motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment max. blade diameter: 280 mm spindle diameter: 2 x 60 mm bushing diameter: 2 x 80 mm track width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron construction extraction port diameter: 2 x 220 mm spindle speed: 4,500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: approx. 5,000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable Nodju Uh T Depfx Ab Ejdd 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change!

Kondisi: bekas, Tahun pembuatan: 2006, de-1 Ndodpjqprk Tofx Ab Eod

Kondisi: sangat baik (bekas), SCM S520E Class Thickness Planer Working width: 520 mm Nsdpfx Aeup Dkpjb Eedd Working height: 3–250 mm 4-knife cutterhead Traditional knives 4 feed speeds: 5–8–12–19 m/min Electric height adjustment of the worktable CE certified Technical documentation (DTR included) Main motor power: 5.5 kW Extraction port diameter: 150 mm Machine dimensions: 110 x 110 x 115 cm (H) Machine weight: 760 kg

Kondisi: baru, Tahun pembuatan: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Ndjdei Hpk Uspfx Ab Esd Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW (both with variable speed drive, stepless adjustment) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Tahun pembuatan: 1998, Kondisi: baik (bekas), I am selling a dowel boring machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming Nedpjd Exwgefx Ab Eodd CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available immediately

Kondisi: baru, Tahun pembuatan: 2024, Magnetic separator for chip transport line Ndodpfxocqvhws Ab Eod Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Optimum OPTIdrill D 23Pro (400 V) Promo Set Bench Drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and Weights Length (product) approx. 680 mm Column diameter 73 mm Width/Depth (product) approx. 350 mm Height (product) approx. 1015 mm Weight (net) approx. 63.5 kg Drilling Capacity Drilling capacity in steel (S235JR) 25 mm Continuous drilling capacity in steel (S235JR) 20 mm Drill Table Drill table working area length 280 mm Drill table working area width 245 mm Drill table T-slot size 12 mm Drill table rotation 360° Drill table tilt 45° Distance spindle - drill table max. 425 mm Speed Range Speed range 200 – 2440 rpm Number of speed steps 12 Njdpfxot N Ivvs Ab Ejdd Electrical Data Drive motor power 0.75 kW Connection voltage 400 V Mains frequency 50 Hz Machine Base Distance spindle - machine base max. 618 mm Machine base working area length 240 mm Machine base working area width 250 mm Machine base T-slot size 16 mm Machine base number of T-slots 2 Machine base T-slot spacing 170 mm Spindle Quill stroke 80 mm Spindle taper MK2 Throat 180 mm SCOPE OF DELIVERY Keyless drill chuck 1 - 16 mm Morse taper MK 2/B16 T-slot nuts Machine vice BMP

Kondisi: sangat baik (bekas), SCM S520 Thickness Planer Nsdpfeitkx Ejx Ab Esdd Working width: 520 mm Working height: 250 mm Feed speed: adjustable, 4 steps Cutterblock with traditional knives 4-knife cutterblock Motor power: 4 kW Weight: 670 kg

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Window manufacturing machines WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Ndsdpfjiix Uvox Ab Eed Profiling and counter-milling machine UNIVAR 10, year 1997