Mesin pelapis tepi

SCM olimpic k 360

Kondisi: baik (bekas), Tahun pembuatan: 2021, Edgebander bekas SCM Olimpic K360 - 11 m/menit - Ketebalan pelat: 8 - 60 mm - Ketebalan edging: 0,4 - 6 mm - Panjang mesin sekitar 4.200 mm - Berat sekitar 1.200 kg - Tersedia segera Bdsdpsyrrpmofx Alaeb - Jam kerja/meteran sedikit (lihat foto) Silakan hubungi kami jika ada pertanyaan.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1991, Torwegge multi-blade saw Chain width: 250 mm Cutting height: 100 mm Bdedpfx Aeucnukelajb Total connected load: 39 kW

Kondisi: baik (bekas), Tahun pembuatan: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 MACHINING CAPACITIES: - Panel height to be processed: 8 - 58 mm Thickness: 10 to 45 mm when using the corner rounder - Panel length to be edged: 210 to 2500 mm - Minimum panel width to be processed: 90 to 1100 mm - Edge tape thickness (in coils): 0.4 - 3 mm without corner rounding, max 3 mm when using the corner rounder - Edge strip thickness (in strips): max 6 mm without corner rounding, max 3 mm with the corner rounder - Edge width: panel thickness + 2 mm on each side - Feed drive (feed speed): 11 m/min - Minimum panel distance: 600 mm - Panel overhang relative to transfer chain (panel projection): 30 mm MACHINE CONFIGURATION: - StarTouch control panel - Pre-set for barcode reader - Unwinding plate Ø800 mm - Frontal extension table - Easy Size: digital positioning of entry fence and panel height - Anti-adhesive spray unit - Edge trimmer (Rectifier RT-V) 12,000 rpm - Infrared panel pre-heating at entry - Gluing unit (VC-VM) with interchangeable glue pot for granulate, 1 kg capacity. Warm-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure unit (press) with 3 rollers, including 1 motorized and timed roller - End trimming unit, tiltable 0-20°, 12,000 rpm - Top/bottom flush trimming unit, digitally positioned with copying system. 1/4 radius 2 mm cutter (or bevel) 12,000 rpm - Corner rounding unit R2mm 12,000 rpm, digitally positioned - Top/bottom radius scrapers R1&2 mm, digitally positioned - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) ADDITIONAL CHARACTERISTICS: Bedpfsrx S Ipex Alajdb - Trimmer motors: 2x2 kW - Saw motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed drive motor: 1.1 kW - Flush trimming (milling) motors: 2x0.65 kW - CE marking - Lockable contactor, emergency stop buttons - Main power supply: 380V, 3-phase, 50 Hz - Pneumatic supply: 8-10 bar (max), dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Trimmers: 780 m³/h, Flush trimmers: 360 m³/h, Scrapers: 2x360 m³/h Maximum operational footprint: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tooling, manual, spare parts list, and schematics.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, nomor mesin/kendaraan: AH00004861, Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 6 batang, suhu: 15 °C, NEW EDGEBANDER WITH OPTIONS SEMI-INDUSTRIAL MODEL WITH SIMPLIFIED CONTROL PANEL Brand: SCM Model: K360 T-ER1 Year: 2023-2024 CE Ref.: AH00004861 WORKING CAPACITIES: - Panel height to be processed: 8 - 50 mm Thickness 10 to 45 mm when using the corner rounding unit - Panel length to be edged: 210 to 2500 mm - Minimum panel width to be processed: 90 to 1100 mm - Edge thickness (in rolls): 0.4 to 3 mm without corner rounding max 3 mm with the corner rounding unit - Edge thickness (in strips): max 6 mm without corner rounding max 3 mm when using the corner rounding unit - Edge width: panel thickness +2 mm on each side - Feed speed: 11 m/min - Minimum distance between workpieces: 600 mm - Overhang of panel relative to the transfer chain (panel protrusion): 30 mm MACHINE CONFIGURATION: - Unwinding table - Prepared to accept an air cushion table - Front extension work table - Feed conveyor: chain - Anti-stick spray group - Edge trimmer cutters (2 spindles) rpm Diamond tools - Glue unit with interchangeable pot Pneumatic pre-cut shear Pressing with 3 rollers, including 1 powered roller - End cutting unit with saw-blade cutter - Top/bottom flush trimming unit with Nesting copying system - Corner rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulizing) - Polishing station with textile polishing brush - Main power supply: 400V. Three-phase +N+E 50Hz Options installed on the machine: - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an air cushion table at machine infeed - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulizing device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - in place of the standard glue pot Bodjttakhepfx Alaodb - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available: in stock

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical capabilities specified in the manual, on workpieces made of plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical work table allows for easy loading and unloading of workpieces, while minimizing the machine footprint to the necessary minimum. Tool changes are accomplished using a 10-position tool magazine mounted on the side of the unit, which enables a variety of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp: ER32 Drilling head unit T3: Bdjdpfx Asmzbr Sslaob Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit - Cross-cutting unit - Milling unit Bdjdpod Inktjfx Alajb - Fine milling unit - Scraper - Buffing unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 5.383 h, HOMAG DRILLTEQ V-200 adalah pusat permesinan CNC vertikal yang ringkas dan sangat efisien, dirancang untuk operasi pengeboran, grooving, dan routing yang presisi di produksi furnitur dan kabinet. Bdjdpfx Aljym Ny Sjaeb Berkat pemrosesan vertikal, mesin ini membutuhkan ruang lantai yang minimal namun menawarkan fleksibilitas dan produktivitas yang tinggi. Ideal untuk produksi tipe batch 1 maupun produksi seri. Mesin dalam kondisi teknis sangat baik dan dapat diperiksa dalam keadaan beroperasi.

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Produsen: HOLZMA Model: OPT HPP 350/43/43/X Jenis mesin: Mesin gergaji balok Tahun pembuatan: 2005 Status operasi: masih terhubung Panjang potong: 4.300 mm Langkah pendorong: 4.250 mm Jumlah penjepit: 6 Bodoxwwfvepfx Alajdb Kecepatan makan maksimum: 130 m/menit Kecepatan makan dapat diatur secara kontinu Proyeksi pisau gergaji: 80 mm Diameter pisau gergaji maks: 350 mm Daya motor utama: 9 kW Pisau scoring: Ya Sisi penahan: Sisi kanan Sistem kontrol: HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Penandaan kesesuaian: CE mark Berat: 5.000 kg

Kondisi: baru, Technical specifications: Maximum saw blade diameter: 400 mm Minimum saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit with separate motor Manual height adjustment of the saw blade Tiltable saw blade from 0° to 45° Manual saw blade tilt adjustment Carriage length: 3200 mm Carriage lock Working table: 1450 mm x 1030 mm Table height: 920 mm Table extensions: 2 pcs Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560 mm Bodpev S Uz Ijfx Alaodb

Kondisi: baru, MAIN MACHINE FEATURES: -Single-head drilling machine for drilling within a 0 - 90° range -Pneumatically adjustable head tilt angle -Cast iron fences -Spindles adapted for quick couplings -Patented pneumatic material clamps -Cast iron working table -Fast and precise adjustment -Accurate drilling STANDARD MACHINE EQUIPMENT: -2 aluminum rulers, each 1.5 m long (right and left) with two stops -5 quick-release clamps Bjdpfx Alsp Ecdgsaedb Technical specifications: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic clamps: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max size of workpiece: 915 x 3000 mm Max workpiece thickness: 70 mm Operating pressure: 6 - 7 bar Speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm