Ruang perawatan portabel NIMF-15.

SELTAR CO-130-AA

Kondisi: baik (bekas), The machine was used for washing fruit and olives and is in good condition. Iodpfx Ajvtf T Dekpsic

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, absolut_neuwertiger_bandtrockner_woody_500_verkauf Ijdpfx Ajvrd Uqokpeic

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, For sale: a wood chip and sawdust drying system with a capacity of 400 kg/hour, including a raw material feeding system. The machine is brand new and has never been commissioned. Iisdpfx Astpxy Tokpoc

Kondisi: hampir baru (bekas),

Kondisi: sangat baik (bekas), KD PUTZ with oiling Completely made of stainless steel Sheet cleaning machine for perforated sheets and standard sheets with 2 edging sides Suitable for 60x80 cm sheets with edge on the short side Iisdpegh A Svjfx Akpec Excellent condition Connection: 16 A

Kondisi: baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 20 kW (27,19 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 281 kg, tegangan masuk: 400 V, lebar total: 600 mm, panjang total: 1.600 mm, tinggi total: 1.800 mm, masa garansi: 6 bulan, kapasitas pemanasan: 20 kW (27,19 hp), Luftgekühlter Kaltwassersatz/Wärmepumpe SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Kühlleistung: 20 kW / 5,69 Tonnen (12/7 — 35°C) Heizleistung: 20 kW / 5,69 Tonnen (40/45 — 7°C) Baujahr: 2020 Ausstattung: Wärmepumpe, Hydraulikmodul Kältekreis: 1 Stk. Wärmetauscher: Plattenwärmetauscher Verflüssiger: Kupfer / Aluminium Verdichter: 1 Stk. Mitsubishi Electric ANB42FPJMT (Scroll) Kältemittel: R410A Anzahl der Lüfter: 2 Stk. Hydraulikmodul: 1 Stk. Wasserpumpe EBARA Matrix 5-2T Isdpfxewp Dq Se Akpjic Abmessungen: 1,6 x 0,6 x 1,8 m Gewicht: 281 kg Betriebsstunden: 2.330 h Zustand: Gut ZUSTAND, TEST & BETRIEBSBEREITSCHAFT Der Kaltwassersatz wird in sieben Stufen einer technischen Prüfung und Überprüfung der Betriebsparameter unterzogen. Zusätzlich erfolgt ein Test auf unserer eigenen Prüfanlage mit Anschluss an Wasser (oder Glykol) und Einstellung der Parameter nach Ihren Vorgaben. Nach Abschluss der Prüfung erhalten Sie einen detaillierten Bericht über die Betriebsleistungen und den Gesamtzustand des Kaltwassersatzes. Der Kaltwassersatz ist transport- und betriebsbereit. Unsere Techniker unterstützen Sie bei der Auslegung der Kälteleistung, Auswahl des geeigneten Kühlsystems und Konfiguration der benötigten Optionen. GARANTIE & SUPPORT Die Qualität der Anlage wird durch eine Garantie von 6 bis 36 Monaten bestätigt. Unser Unternehmen bietet zudem: - Kältemittelfüllung - Austausch von Öl und Filtern - Technischen Support LOGISTIK - Weltweite Lieferung möglich - Unterstützung bei Verladung, Exportdokumentation und Logistikkoordination Vereinbaren Sie eine ausführliche Beratung. Fotos, Videos und ein vollständiger Testbericht können auf Anfrage sofort bereitgestellt werden.

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), Product-contact parts are manufactured in stainless steel 1.4571, while the remainder of the used mixer dryer is made from 1.4301 stainless steel. Machine Description: Used Continuous Horizontal Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of Manufacture: 2002 Speed: 107 rpm Material: 1.4301 Drive Motor: 5.5 kW Version: EExdellCT4 Total Capacity: 235 liters Product-contact parts: Stainless steel 1.4571 Iisdpfjitcu Esx Akpsc Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Dead weight: approx. 1600 kg Technical documentation: Yes Note: Operating temperature 130°C, design temperature 200°C, internal mixer pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame Condition: Used Price: On request

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Ijdsv Si Szjpfx Akpeic Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: baru, Tahun pembuatan: 2026, panjang total: 1.450 mm, lebar total: 800 mm, tinggi total: 1.800 mm, berat keseluruhan: 500 kg, daya: 4,75 kW (6,46 hp), FC 120 ZK Working capacity Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush band dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush band speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Isdpet D D Nzjfx Akpsic Power consumption: 12A, Extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D91402707010001/2013, berat keseluruhan: 1.500 kg, elektromotor_abzugeben Iiodpfxowittps Akpoc