Mesin penggilingan

SHARP

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard Gedpertd Uwsfx Adtobg - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 1992, JAESPA bandsawing machine, model W400 AZ Control: Minipos 807, Year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total connected load: 4 kW Approx. weight: 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Space requirements: 2.8 x 2.8 x 2 m Gsdsgf H Saepfx Adtobg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 5.650 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar feeder Fanuc 31iB - 5,646 operating hours Country of manufacture: CH Voltage: 400V Dimensions: 2135x1250x2114 mm Net weight: 2,700 kg TECHNICAL DATA Gbedekhnqgepfx Adtjg Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Maximum bar diameter: 16 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool Station 1 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Tool Station 2 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Endworking Unit Number of positions: 4 Number of driven positions: 3 Driven tool speed: 8,000 rpm Backworking Number of positions: 6 Number of driven positions: 6 Driven tool speed: 8,000 rpm Electrical supply Line voltage: 400V Technical data is provided without obligation; errors and omissions excepted.

Kondisi: bekas, Tahun pembuatan: 1987, de-katalog-2024-001 Gedpfew Ny S Dsx Adtjbg

Kondisi: baru, Bernardo Master 360 Pro Universal Lathe Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 502 mm Gsdjd I H Izjpfx Adtsbg Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Speed Range (8 steps): 70 - 2000 rpm Longitudinal Feed Range (32 steps): 0.052 - 1.392 mm/rev Cross Feed Range (32 steps): 0.014 - 0.380 mm/rev Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 100 mm Quill Taper: MT 3 Motor Power S1 100%: 1.5 kW (400 V) Motor Input Power S6 40%: 2.2 kW (400 V) Machine Dimensions (L x W x H): 1825 x 750 x 1600 mm Weight: approx. 576 kg *Removable gap in bed: 205 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, as per DIN 55029 • Fixed steady rest – max. passage diam. 70 mm • Travelling steady rest – max. passage diam. 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine light • Reducing sleeve • Change gears • 2 dead centres • Foot pedal with brake function according to CE • Motor with electromagnetic brake according to CE standards • Stand with drawers • Operating tools

Kondisi: bekas, Tahun pembuatan: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over support: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 rpm / 8 steps Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Gedpfsu Ix D Ajx Adtjbg Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.3 x 0.9 x 1.3 m Equipment: Röhm 3-jaw chuck, Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slots for copying attachment Live center

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3595, Sehr geehrte Damen und Herren, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings and the lead/feed screw bearings have been completely replaced! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify at our premises. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Thread types possible: Metric, Inch, Module, Diametral Pitch Gsdpjthd Shjfx Adtobg Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, retractable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul the selected machine for you - Upon request, we can repaint the machine in your desired colour - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange for shipping and/or delivery

Tahun pembuatan: 1988, Kondisi: bekas, Voest Alpine DA 160 lathe, year of manufacture 1988, equipped with a three-jaw chuck and Multifix toolpost. Can be demonstrated under power by arrangement. Gbedpfxoma Snxo Adteg

Kondisi: bekas, Tahun pembuatan: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 mm/min (x-axis) Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight (approx.): 1.15 t Required space (approx.): 1.5 x 1.45 x 2.2 m Product Information – "Multifunctional Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Spindle Speed" The Optimill MF 4 Vario is a multifunctional drilling and milling machine designed for professional applications. It features a continuously variable electronic drive with frequency inverter "Made in Germany" and a digital 3-axis position display DPA 21. Heavy-duty, massive construction made from high-quality Meehanite cast iron. High concentricity accuracy thanks to tapered roller bearings, less than 0.01 mm measured at the quill. Automatic quill feed. Clockwise/counterclockwise rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant system. Y-axis features a flat guideway and a large travel of 400 mm. Motorized table height adjustment (Z-axis) with rapid traverse. Equipment details: - Frequency inverter, quality made in EU - Drilling/milling head - Tiltable ±45° - Overhang 200–680 mm - Stepless speed control, especially wide speed range - Drill depth stop, adjustable with millimeter scale, front readable - Protective screen, height-adjustable, generously sized - Cross table, heavy-duty, generously sized, precision-machined surface - Motorized table height adjustment (Z-axis), adjustable end stops - OPTI control panel with integrated control desk - Integrated digital position display DPA 21 with rpm indicator - X-axis motorized table feed, stepless speed regulation, rapid traverse, right/left-hand rotation Technical Data: Length (product): 1,500 mm Width/Depth (product): 1,450 mm Height (product): 2,200 mm Weight (net): 1,150 kg Total connected load: 4 kW Gsdjt U Rm Iopfx Adtjbg Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Max. cutter head size: 100 mm Max. end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle spindle mount: ISO 40 DIN 2080 Vertical spindle speed range: 8 ranges, electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle–horizontal table min.: 40 mm Distance vertical spindle–horizontal table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. table load: 275 kg Vertical spindle main drive motor: 3 kW Coolant pump drive motor: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity in steel (S235JR): 32 mm Continuous drilling capacity in steel (S235JR): 28 mm Vertical spindle rotation range, milling head Z–X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: Gedpocc D Ddsfx Adtsbg The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.