Mesin cetak tiup SIDEL

Sidel SBO 6

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour. Max. bottle size: 3,000 cc. Blow stations: 6. The machine is in very good condition and well-maintained. GENERAL INFORMATION The SBO 6/10 features 6 molds and 10 heating modules. It is compatible with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel’s two-stage PET stretch blow molding machines require previously produced preforms to be fed into the machine. Separating the processes of bottle and preform production allows for optimized production, increased operational flexibility, and provides higher productivity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9–41 mm (measured from the bottom edge of the support ring) Minimum internal neck diameter: 19 mm Maximum external neck diameter: 34 mm Preform support ring diameter: 29–51 mm Maximum preform length: 210 mm Fpjdeg Ailcspfx Adgsb MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle volume: 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (for still and carbonated beverages) 0.25 liter bottle: 14–20 grams 0.50 liter bottle: 20–33 grams 1.00 liter bottle: 26–40 grams 1.50 liter bottle: 35–51 grams 2.00 liter bottle: 44–58 grams 3.00 liter bottle: 68–84 grams BLOW WHEEL Height: 3.5 meters Number of molds: 6 Clamping force: 10 tons Article height (below the neck) at outlet: approx. 1.4 meters Machine DC drive motor power: 4 kW HEATING CONDITIONER Height: 2 meters Number of oven heaters: 10 Number of heating zones per unit: 8 Maximum power: 170 kW ELECTRICAL USAGE Maximum supplied power: 200 kW Average consumption: 100–150 kW/h (varies depending on bottle produced) COMPRESSED AIR Supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies depending on bottle produced) Blowing pressure – champagne base: up to 25 bar Blowing flow – champagne base: 110–550 Nm3/h Blowing pressure – petaloid base: up to 35 bar Blowing flow – petaloid base: 155–770 Nm3/h COOLING WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 cubic meters/hour Up to 16,000 Kcal/hour heat to be removed WEIGHT Blow wheel with molds: 8 tons Heating conditioner: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING CONDITIONING The preforms are conveyed to the heating conditioning unit with the necks facing upwards. This unit continuously ensures that the preforms are inverted before being presented neck-down in front of the heating modules, and then inverted again. During the heating phase, the preforms are rotated and their necks are protected from heat to optimize temperature distribution without deforming the neck. Heating is achieved through 10 heating modules. Each unit can accommodate up to 8 horizontally arranged infrared lamps, which are air-cooled at the ends. The heating output of 8 zones, corresponding to the 8 lamp rows, is adjustable to optimize the heat profile. These zones are regulated on all SBO models. After heating, preform temperature is monitored by an infrared camera to regulate the controlled zones, ensuring the maintenance of the required temperature.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE 12,000 BPH Speed: 12,000 BPH Blow Molder: SIPA Year: 2009 Number of cavities: 8 Preform elevator Preform orientator Chiller Bottle formats: 0.5 L - 1 L - 1.5 L Monobloc: TETRA PLAST RFA-40 Year: 1995 Filling type: Aseptic Cap type: 38mm pre-threaded plastic Cap elevator Bottle dryer: EUROPOOL Year: 2007 Fedpfx Adjtqfcgsgspb Type: Air knife Labeler: KRONES Type: Roll-feed Sleeving machine: CLEVER 2019 With steam tunnel Bottle rejection system Dryer: FMT Year: 2011 Type: Air knife Shrink wrapper: SMI Year: 2009 Handle applicator: TWIN PACK Year: 2000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, tinggi produk (maks.): 380 mm, diameter benda kerja (maks.): 130 mm, kapasitas produksi: 7.200 unit/jam, TECHNICAL DETAILS Number of cavities: 6 Capacity for standard bottles: up to 7,200 bph (bottles per hour) Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck diameter (internal): 34 mm Fjdpfxjx A Uu Es Adgepb MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Feeding guide rail length: 2,000 mm Power supply Total power consumption: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Feeding guide rails Adaptable to other voltages on request

Kondisi: bekas, Tahun pembuatan: 2005, Gebrauchte Streckblasmaschine Sidel SBO6 2 Baujahr 2005 – 9.000 Fl/h Die Maschine wurde aus der laufenden Produktion demontiert. Die SPS ist vorhanden und ihre Funktion ist gewährleistet. Die Maschine befindet sich insgesamt in einem guten Wartungszustand. Aufgrund einer Lagerungsdauer von etwa 12 Monaten wird dennoch eine Vorinbetriebnahmewartung empfohlen. Der Transport stellt aufgrund des großen Volumens eine Sonderladung außerhalb des Regelformats dar. Fpodjvguxvopfx Adgob Für diese Streckblasmaschine können wir sämtliche notwendigen Ersatzteile liefern.

Kondisi: bekas, Tahun pembuatan: 1992, Overview This blow molding machine was built in 1992 by the French manufacturer Sidel. It has a production capacity of up to 4,000 bottles per hour. Technical Details Output: 4,000 bph 4 cavities Scope of delivery Blow molding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Fpsdpfx Adjnpbhvegeb Two mold types for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

Kondisi: bekas, Tahun pembuatan: 2008, de Fodpovgu D Sofx Adgjpb

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, IT001 Fpodpfxexl R Uao Adgob

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, el SMF COMBI 400 es una sopladora automática diseñada para la producción eficiente y de alta calidad de botellas de PET. Esta máquina combina tecnologías avanzadas para ofrecer un funcionamiento continuo y preciso con una mínima intervención manual, ideal para plantas de embotellado que requieren flexibilidad y alto rendimiento. VENTAJAS DE LAS SERIES HS Y COMBI: • Bajo consumo energético • Construcción modular • Funcionamiento silencioso • Diseño compacto y ahorro de espacio • Cambio sencillo de formato de botella y tipos de bocas • Sistema de control PLC avanzado con interfaz fácil de usar • Memoria integrada en el PLC que guarda los parámetros necesarios para producir diferentes tamaños de botellas • Medición de temperatura pirométrica – Power Wizard PRINCIPALES BENEFICIOS • Sistema comprobado, capaz de operar en condiciones ambientales exigentes • Unidad de soplado potente, con controlador preciso y un mecanismo de ajuste conveniente • Espacio de transferencia mínimo para el sistema de distribución de aire • Funcionamiento sencillo, robusto y duradero PARÁMETROS PRINCIPALES Fedpfx Aewny Eijdgopb Cantidad de aire de soplado (25 BAR): 3,46 m³/h Material del molde: FORTAL

Kondisi: bekas, Tahun pembuatan: 2022, linear-can-filler Fsdoxbn Icopfx Adgepb

Kondisi: baik (bekas), Produktionskapazität von bis zu 4000 Flaschen/Stunde (abhängig vom Format). Geeignet für Formate zwischen 0,25 l und 3 l. Bestehend aus: • Ofen zum Erwärmen der Preforms, bestehend aus 6 Heizmodulen mit je 8 Infrarotlampen • Preform-Übernahmerad • Zweistufiges Blasmodul mit Niederdruckvorblasung und anschließender Hochdruckblasung Fpsdpfxewcggvj Adgob • Flaschenübernahmerad • Inklusive Palettenwender DOKUMENTATION VERFÜGBAR