Motor penggilingan 1,6/2,8 kW / 2845/5790 rpm dengan sistem pelepas cepat

Siemens Leuco 1PC3084-2AA99

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Rcsdpfxora Nrxs Ad Rod Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Bale weight: approx. 450 kg Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: from 95 to 240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses Rcedpfx Asfv Awasd Red deliver the full pressing force over the entire stroke length. They are primarily used when processing long-stroke parts with consistent force is required. Convincing technology: • Long and precise spindle guidance ensures maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings on the piston for smooth and consistent running • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against twisting • For the PND 85/S, spindle return is effected via only one cylinder chamber—providing additional air savings • Working height fine adjustment is simple, quick and precise in 2 stages: – Basic adjustment by loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and air savings.

Kondisi: bekas, Tahun pembuatan: 1976, dreh-20240612 Redpfx Ajw Tdxcjd Rocd

Kondisi: baik (bekas), Tahun pembuatan: 1991, daya: 22 kW (29,91 hp), Suitable for pallets or other residual materials Rcjdpfjt Tvk Aex Ad Rjd Rotor width = working width 98 cm 22 kW motor with discharge auger

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Einwellenzerkleinerer von Weima Modell: WL6S Hauptantriebsmotor: 22 kW Rcjdpoivpthefx Ad Rod

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1994, Min.-max. Drahtdurchmesser: 6 bis 14 mm (.236″ bis .551″) Fliegende Schere Rcodpfx Aofkmr Sod Rjd (5) indexierende Dreharme (4) Vorschubwalzen 80 bis 120 m/min Max. Schnittlänge: 15 Meter Strecke Indexierender Draht-/Stabsammler 30 kW (40 PS) AC-Motor Hydraulikmotor: 15 kW (20 PS) Bedienpult; 380V, 50 Hz, 3-phasig SPS-Steuerung: SIEMENS S5 3 vertikale Abspulvorrichtungen Vollständig generalüberholte Maschine

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, de-001 Rcedpfxovzub He Ad Red

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Number of spindles: 5 units Working width: 230 mm Planing height: 160 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" touch panel KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency controlled 4,000 – 6,000 rpm - Width and height positioned by motor: left spindle – radial upper spindle – axial - Feed beam positioned by motor DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125 – 163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operational parameters: Material, wood moisture, tools, depth of cut, and feed speed. Adjustments to operating parameters may be necessary, if applicable. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to the planing head Rodpjwgwmhsfx Ad Rscd Important: System cannot be operated without the jointing rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamp nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-cont...

Tahun pembuatan: 1978, Kondisi: belum diuji (bekas), nomor mesin/kendaraan: 1177, Connection load approx. 18 kW Working width 140 mm Lower feed consists of: Conveyor belt 8800 x 60 mm (lower) Conveyor belt 8800 x 40 mm (pre-feed) Upper feed consists of: Conveyor belt 7140 x 40 mm (upper) Rcodpfxoiw D T Io Ad Red Units: Pos. 1 - Scoring unit 2.2 kW 3000 rpm Pos. 2 - Milling unit 3 kW 6000 rpm Pos. 3 - Milling unit 5.5 kW 6000 rpm Pos. 5 - Belt sanding unit 2.2 kW 120 x 2060 Pos. 8 - Belt sanding unit 2.2 kW 120 x 2060 / Frame sanding belt Pos. 4, 6, 7, 9 - Profile and edge breaking units Extraction ports: 5x100 mm, 1x120 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, The item for sale in my auction is a conveyor belt with a length of 11 meters and a belt width of 0.6 meters. Possibility of transport. Redpfsvylp Sjx Ad Rscd Möglichkeit des Transports.