Mesin frais kolom bergerak

SORALUCE SL 5000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 12.000 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 720 mm, tinggi total: 3.376 mm, beban meja: 2.500 kg, berat keseluruhan: 16.300 kg, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 33.000 W, berat alat: 8.000 g, panjang produk (maks.): 5.480 mm, jumlah sumbu: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse rates of 50 m/min in all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 tools and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to acquire the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table surface: 140 mm • Max. distance spindle nose to table surface: 860 mm • Working spindle Nwsdpfx Aasx Nkp Uoasf • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: 40° steep taper • With neighboring pockets occupied: 80 mm • With neighboring pockets empty: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Operating requirements • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air consumption: 260 l/min • Tank capacity: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mount for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Linear axis drive motor • Rotary axis drive motor • Cylinder for swivel unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 29.081 h, Fungsionalitas: berfungsi sepenuhnya, FPT Industrie S.p.A. – Travelling Column/Portal Milling Machine Model: DINOSPIN Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine Weight: 44,280 kg Control System: Heidenhain TNC640 (15") RAM: 4 GB Hard Disk: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (Remote handwheel) Universal Milling Head (5-axis machining, simultaneous movement of 2 axes) Max. Spindle Speed: 18,000 rpm Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Working Torque A/C: 450 Nm Axis Clamping Torque: 1,400 Nm Positioning Uncertainty: 8 arcsec / Scatter: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Spindle Torque (S1/S6): 84/128 Nm Continuous Operation Constant Power: 2,500–18,000 rpm Continuous Operation Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid Tapping: yes Nwedpfoyrndmsx Aaajf Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped-wheel, with changer arm) Magazine Capacity: 80 Max. Tool Ø: 75 mm Max. Tool Ø with free adjacent pocket: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: Tool length/radius + tool breakage detection (software included) Probe for workpiece measurement/alignment: Wireless transmission, cycles included in CNC Monitoring Sensor for vibration/collision detection: Response time approx. 1 ms Coolant System external/internal (LEU/LEIUHP) Tank Volume: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External Cooling: max. 30 l/min, max. 10 bar ICS (Internal Coolant Supply): max. 30 l/min, max. 70 bar Additional Options/Features External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, produsen pengendali: SIEMENS, model controller: 840 D, jumlah sumbu: 4, en Nodex D I A Sopfx Aaajwf

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS CNC KOLOM BERJALAN DENGAN MEJA PUTAR DAN BERGESER GERAK MEMANJANG: 8000 mm GERAK MELINTANG: 1500 mm GERAK VERTIKAL: 2500 mm KECEPATAN RAPID L-T-V: 35 m/menit UKURAN MEJA: 2000 x 2000 mm GERAK MELINTANG MEJA: 1500 mm Nwodpfxowl R Age Aaajf BEBAN MAKSIMAL: 15000 kg KEPALA: SUMBU A/B OTOMATIS; KONTINU; ISO 50; 7000 rpm; 49 kW; 1180 Nm MAGAZIN TOOL: TIPE RANTAI; 80 POSISI UNIT KONTROL: HEIDENHAIN iTNC 530 AKSESORIS: KONVEYOR SERBUK; LASER TOOL SETTER; HANDWHEEL PORTABEL CATATAN: DENGAN MEJA PUTAR 1500x1500 mm; BEBAN MAKSIMAL 15000 kg

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: 5279, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.300 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 22 rpm, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal (X-axis): 8,000 mm Vertical spindle slide (Y-axis): 1,600 mm Horizontal/Traverse spindle (Z-axis): 1,300 mm Nedpfju Sppwex Aaaowf WIRELESS PROBE: m&h HSK 100 SIEMENS OPERATOR HANDHELD UNIT B-MPI RIDE-ALONG WORK PLATFORM 3-SIDED SPLASH AND CHIP GUARD WALL CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm, Width: 2,500 mm WASHING GUN IN THE WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 l 2-CHANNEL COLLISION MONITORING SYSTEM 2 monitoring channels: – 1. Collision monitoring for orthogonal milling head (Channel 1) – 2. Collision monitoring for fork milling head (Channel 2) PENDULUM OPERATION, 3 WORKING AREAS MULTI-AXIS INTERPOLATION FOR FREE-FORM SURFACES (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For fork head, mounted on clamping plate – 10 tool positions – Maximum tool weight: 12.5 kg – Maximum tool length: 200 mm – Maximum tool diameter: 63 mm – Maximum tool diameter with free adjacent slot: 250 mm – Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Maximum tool diameter (full magazine): 125 mm Maximum tool diameter (with free adjacent slots): 250 mm Maximum tool length: 500 mm Maximum tool weight: 25 kg Maximum tool load torque: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 PIECE FORK HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE – High-frequency milling spindle – Integrated high-frequency spindle – Tool holder HSK – A 63 DIN 69893 – Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle – Speed range up to 20,000 rpm – Motor spindle bearings with lifetime grease lubrication – Sealed with air purge – Torque: 40 Nm at 100% duty cycle, 50 Nm at 40% duty cycle – Automatic tool clamping – Power transmission according to RPM-power diagram GMN HCS 170 – Technical data per datasheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN – Liquid-cooled milling head – Cast construction from GGG 60 – Milling head, automatically swiveling, 180 x 1 degree – The resulting positions can be accessed via CNC control, programmed, and executed – Repeatability at spindle nose: ±0.002 mm, positioning accuracy ±3 seconds – Tool holder: HSK 100-A – The milling spindle is equipped with a hydromechanical quick-change system – Tool clamping force: 45 kN – Internal coolant supply Form A-D – External coolant supply via shower ring – Speed range: 22-4,000 rpm MAIN DRIVE Through a frequency-controlled liquid-cooled AC motor with 32 kW drive power at 100% duty cycle and 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. – 637 Nm torque at 100% duty cycle, 875 Nm at 40% duty cycle.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 820 mm, jarak gerak sumbu Z: 720 mm, model controller: Mazatrol SmoothG, lebar meja: 820 mm, panjang meja: 3.500 mm, berat keseluruhan: 16.500 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.000 W, jumlah slot dalam magazin alat: 48, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: konveyor serpihan, CNC vertical machining center MAZAK VTC-820/30 (Year of manufacture: 2018 / Commissioned in 2019) The MAZAK VTC-820/30 is a powerful CNC vertical machining center designed for precise and efficient processing of large workpieces. With generous travels of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is especially suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The robust worktable, measuring approximately 3,500 × 820 mm, allows for the setup of large-scale workpieces. The high-performance main spindle, with speeds up to 12,000 rpm and a drive power of approximately 22 kW, ensures high cutting performance and precision. The spindle taper CAT 40 (ISO 40) provides broad tool compatibility. Nwjdpfx Aasyipy Rsasf This machine features the advanced MAZATROL SmoothG control system, which offers intuitive operation, quick programming, and high process reliability. The 48-position tool changer enables flexible and efficient machining processes, even for complex manufacturing tasks. For optimal production conditions, the machining center is equipped with through-spindle coolant supply, a chip conveyor, and an automatic lubrication system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers outstanding stability and vibration damping, which positively impacts surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that guarantees high precision, performance, and reliability for industrial manufacturing. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.600 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, panjang meja: 2.500 mm, lebar meja: 2.000 mm, beban meja: 30.000 kg, daya motor spindle: 38.000 W, diameter meja putar: 2.000 mm, panjang langkah makan poros W: 1.500 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, MESIN FRAIS CNC TIANG BERGERAK MECOF EMCO mod. MASTERMILL-HPC3 Kontrol numerik Heidenhain iTNC 530 Sumbu X mm 4.000 Sumbu Z (vertikal) mm 3.000 Sumbu Y (melintang) mm 1.600 Ukuran slide mm 500 x 500 Kecepatan pergerakan cepat mm/menit 30.000 Meja putar-translasi mm 2.000 x 2.500 Kapasitas angkat 30.000 kg Translasi mm 1.500 Nodpewzxiysfx Aaaewf Rotasi dan translasi berkelanjutan Kepala otomatis bi-rotasi dengan 360.000 posisi Sumbu A 0,001° Sumbu B 3° Spindle interface ISO 50 Kecepatan maksimum 6.000 rpm Daya spindle 38 kW Changer alat 80 posisi Dilengkapi dengan: - Renishaw untuk pengukuran alat - Tekanan tinggi internal di spindle 20 bar - Konveyor serbuk

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, Travel paths: Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transverse (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100 % duty cycle 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z axes: 25000 mm/min Weight (approx.): 15000 kg Equipment: - Internal coolant supply according to DIN 69871 form AD, including minimum quantity lubrication with 15 selectable dosages via M-functions, programmable: 20 bar - NC rotary table, size 1000 x 1000 mm as 4th axis, integrated into machine control. Max. load 5000 kg, positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots - Chip conveyor for TA-D 25 - Tool changer Accessories: Nwjdpfjykbxzex Aaaof - Front-mounted movable control panel including Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head/2 planes at 2.5° increments (H200) (option) - Distance from spindle nose to table edge 250 mm - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into the machine control. Max. load 5000 kg, positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots. - Coolant system with 150 l tank, delivery pressure 5 bar, delivery rate 50 l/min, outlet via spray ring around machine spindle - Splash guard enclosure, fully closed on 4 sides with front sliding doors and additional side sliding door on the left column with viewing windows on all 4 sides - Heidenhain servo motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system Heidenhain on all axes - Telescopic covers for X-axis guides - Ball screws in X, Y, and Z axes - Automatic cycle lubrication for all axes and drive elements - Electrical equipment by Siemens - Hydraulic system by Vickers

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 20.325 h, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 880 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: TNC430, tinggi total: 3.200 mm, lebar meja: 1.250 mm, panjang meja: 1.000 mm, beban meja: 2.000 kg, berat keseluruhan: 18.000 kg, kecepatan spindel (maks.): 8.000 rpm, jumlah slot dalam magazin alat: 120, panjang produk (maks.): 6.000 mm, jumlah sumbu: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It is equipped with a Heidenhain control, an SK50 spindle taper, and 120 tool stations. With a total of 22,180 spindle hours, you should not miss the opportunity to purchase this DMG DMU 125 P hi-dyn universal machining center. Contact us for further details on this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel paths: 1250 x 880 x 800 mm • Tool holder: SK50 • Tool changer: 120 positions in chain magazine • Gripper type: double gripper • Control unit: Heidenhain TNC 430 • Working area: longitudinal 1250 mm, transverse 880 mm, vertical 800 mm • Dimensions: approx. 6 x 8 x 3.20 m (height) • Weight: approx. 18,000 kg • B-axis is indexed Additional Information: • Full enclosure • Through-spindle coolant • Blow air through spindle retrofitted • Chip conveyor • Coolant tank: 600 liters • NC rotary table D1250 x 1000 mm • Maximum table load in center: 2,000 kg • Clamping grid: 9 slots 18H7 at 100 mm intervals • Motor assembly with SK50 gearbox – spindle speed up to 8,000 rpm • Renishaw MP10 SK50 infrared probe • Electronic handwheel • 4 operating modes possible • Rinsing pistol with pump Nwodpfxjx Sz Dhe Aaaef Technical Specification Taper size: SK 50 Through-spindle coolant: Yes Dimensions Machine depth: 8,000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, cnc-mazak-vert-langbett-hu-it-lt Njdpfxex Ih Dms Aaaswf