Rak rak palet rak Rak Rangka Rak

SSI Schäfer PR600/ 2.400 mm/ K: 80 x 40 mm

Kondisi: seperti baru (mesin pameran), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x Pallet rack beam, new (second choice) Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Version: stepped beam For panel thickness: 22 mm Connector: 5 HK (hooks) 2,400 mm clear span Ffodpeku A A Usfx Adgot Max. load per pair of beams: 1,600 kg with evenly distributed load 02x Safety pins, new Version: fully galvanised For securing the longitudinal beams against unintentional lifting out

Kondisi: baru, Saw blade diameter: 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160 x 90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80 x 100 mm Total power requirement: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts to the right and left up to 45°, positive stops at 90° and at 45° left • Suitable for sawing steel, stainless steel, and, with limitations, aluminum profiles • Vise with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Hardened steel cone safety clutch to protect the saw blades • Large heavy-duty cast base plate for maximum stability and low-vibration operation • Two speeds: 30 + 60 rpm Fjdpfxjd Iin To Adgjft • High-performance special gearbox with flexible coupling for heavy-duty use • Automatic blade cooling system • Double-supported saw head • 24 V safety switch integrated into the handle with restart protection • Length stop, assembly tools ATTENTION: Price is WITHOUT saw blade!!!

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), 70 running meters SSI Schäfer Palflex pallet racking incl. wire mesh shelves Used goods, good condition, see photos Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Galvanized frames Red beams Wire mesh shelves included! 2 pieces of mesh per 2.7 m beam length Negotiable price: € 6,950,-- net ex stock Offer consists of: + 26 pre-assembled frames, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg per bay with evenly distributed load + 200 safety locking pins + 100 galvanized mesh shelves for 50 bays each 2.7 m beam length + 104 concrete anchors + Load capacity signs Goods in stock. Transport and installation available on request. Inspection possible anytime by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, specifications and prices subject to change and prior sale. See our GTC. All prices excl. VAT ex stock) Purchase / Sales: We are always looking for and offering numerous items from different sectors Fodpfx Aokx E I Nodgjft - broom-clean company clearances - business liquidations - Fast, flexible, efficient! - We also clear and/or dispose of assets for insolvency administrators. Contact us with a few keywords and we will reply promptly. To visit our website, please click on our logo!

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height range: 95–240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight approx.: 27 kg Fjdpfx Aofv Awaodgjft Dimensions (L x W x H): 160 x 230 mm Direct Acting Pneumatic Presses These presses deliver full pressing force over the entire stroke length. They are primarily used when long-stroke parts require processing with constant force. Outstanding Features: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-position cushioning on both sides • Double guide rings in the piston ensure smooth and consistent operation • Oil-resistant sealing elements Special Features of the PND Series: • Spindle secured against rotation • On the PND 85/S, spindle return is carried out via only one cylinder chamber—resulting in additional air savings • Fine adjustment of working height is easy, fast, and precise in two stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine-tuning via the stroke limitation ring on the piston rod Additional Advantage: Faster cycle times and air savings

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) Ffsdoh Ek Dajpfx Adgst - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, nomor mesin/kendaraan: 9993, 9-knife rotor 3 rows of stator knives Rotor diameter: 400 mm Fodpfeghgnisx Adgjft Working width: 500 mm Infeed opening for window profile bars Approx. 200 x 460 mm Drive motor: 30.0 kW

Kondisi: baru, Pressure: 17.0 kN Ffodpfx Asfv Avvedget Stroke: 40 mm Throat depth: 110 mm Working height (min-max): 70 - 220 mm Table dimensions: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle Lever Pneumatic Presses Including precise working height adjustment via bevel gear with side-mounted crank—easy and convenient to adjust. Toggle lever pneumatic presses are used whenever maximum pressing force is required shortly before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Kondisi: baru, Tahun pembuatan: 2025, Bench Drill for Metal CORMAK Z7016A Vario – Precision Column Drill with Stepless Speed Adjustment The CORMAK Z7016 Vario bench drill is a compact and functional column drill for metal, designed for precise drilling operations in professional and workshop environments. Thanks to stepless speed regulation, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key features Stepless speed adjustment – range 440–2600 rpm for optimal adaptation to the workpiece material. Robust cast iron construction – provides high rigidity and reduces vibration during operation. Worktable with height and angle adjustment – tiltable from -45° to +45°, and features rack-and-pinion height adjustment. Laser indicator and LED lighting – guarantee maximum drilling precision and operator comfort. Electronic speed display – allows real-time parameter monitoring. 65 mm vise included – ready to work straight out of the box. Design and technology The Z7016A Vario bench drill is built on a sturdy 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine body and worktable are made from precisely machined castings. The MT2 taper allows for a wide range of tool mounting, while the 60 mm spindle travel enables deep hole machining. The total machine height is only 870 mm, making it an extremely ergonomic and mobile unit. Precision and performance With a motor power of 500 W (S1) and 650 W (S6), the CORMAK Z7016A Vario column drill enables effective drilling in metal up to a diameter of 16 mm. No need for changing gears thanks to the smooth speed adjustment, significantly reducing machine setup time. The ergonomic three-arm feed lever, depth indicator, and spindle guidance ensure high repeatability and accuracy of holes. Applications The Z7016A Vario model is a bench drill for metal recommended for: locksmith and repair workshops maintenance departments technical schools small production lines and prototyping workshops Standard equipment 65 mm vise Laser drilling indicator Work area LED lighting Electronic speed display Three-arm feed lever Tilting table with rack and pinion height adjustment Technical data Parameter Value Max drilling diameter 16 mm Ffjdpfx Adjxbzuvsgjt Spindle speed range 440–2600 rpm Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle to column distance 125 mm Spindle to base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1/S6) 500 W / 650 W Overall height 870 mm Weight 31.5 kg

Kondisi: bekas, Pressure 10 t Ffjdpfxjd R Szuo Adget Stroke 400 mm Downward speed from 200 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 8.5 kW Machine weight approx. 1.3 t Space requirements approx. ... m - Without clamping plate - Approved only for operations with closed tooling

Kondisi: baru, Plastic storage box. Can be used individually, stacked, or mounted on a perforated wall. Sizes: Ffodpfx Asdxq Dyjdgjt MH2 box: 50 x 30 x 20 cm MH3 box: 35 x 20 x 20 cm MH4 box: 23 x 14 x 13 cm MH5 box: 16 x 9.5 x 7.5 cm Colours: yellow, red, green, blue Please refer to the images for pricing.