Baler

Strautmann PP1207

Kondisi: sangat baik (bekas), Strautmann PP 1207 Plus Bale dimensions (LxWxH): 1200 x 1100 x 730 mm Redov Aiymopfx Ahwep Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales/hour Number of bindings: 4 Machine weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: sheltered indoors/outdoors Noise level: less than 80 dB(A) Year of manufacture: 2003-2007 Also available: - Strautmann PP 1207 balers, year 2010-2011, price: 5,500 EUR - Strautmann PP 1208 balers, year 2014-2015

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Rjdpfx Ahovgrh Ujwjp Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Kondisi: siap digunakan (bekas), Strautmann PP 1207 Pressing force: 58 tonnes Bale weight: 400–500 kg depending on material Motor: 4 kW Bale dimensions (LxWxH): 1200 x 700 x 800 mm Filling aperture: 1145 x 430 mm External dimensions (LxWxH): 1844 x 1067 x 2868 mm Rjdpfora Aq Dox Ahwjp Filling aperture: 1145 x 430 mm Transport height: 2500 mm Baler weight: approx. 2300 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 59 t, lebar bukaan pengisian: 1.190 mm, panjang bukaan pengisian: 400 mm, panjang bal: 1.180 mm, lebar bal: 700 mm, tinggi bal: 800 mm, berat bal: 350 kg, lebar total: 1.059 mm, tinggi total: 2.871 mm, panjang total: 1.838 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, arus masuk: 16 A, berat keseluruhan: 2.300 kg, masa garansi: 6 bulan, tinggi transportasi: 2.050 mm, daya: 4 kW (5,44 hp), tahun perombakan terakhir: 2025, lebar transportasi: 1.059 mm, panjang transportasi: 1.838 mm, jenis perlindungan (kode IP): IP54, frekuensi input: 50 Hz, panjang langkah: 890 mm, Perlengkapan: dokumentasi / manual, strautmann-umwelttechnik-pp1207-en Redpfx Aswq Ifvehwjp

Kondisi: bekas, Tahun pembuatan: 1999, Technical Details: Drilling capacity in steel (diameter): 32 mm Throat depth: 293 mm Drilling stroke: 120 mm Drilling capacity in cast iron: Ø 38 mm Spindle taper: MK 3 Spindle overhang: 293 mm Spindle speed: 160 – 2250 rpm Feed: 0.10 – 0.20 mm/rev, manual and automatic Max. distance spindle/table: 55 - 642 mm Table clamping surface: 300 x 300 mm Drill table adjustment: yes Rjdjva Hmrepfx Ahwop Column diameter: 115 mm Distance spindle center to base plate: 1207 mm Total power requirement: 1.9 kW Approx. machine weight: 280 kg Approx. machine dimensions (LxWxH): 0.7 x 1.0 x 1.9 m Pillar drilling machine with stepless speed adjustment and automatic feed. Tapping function with direction switch. Equipment: RÖHM drill chuck 3 - 16 mm, operation via left/right foot switch. Very well-maintained, excellent used condition!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 59 t, lebar bukaan pengisian: 1.190 mm, panjang bukaan pengisian: 600 mm, panjang bal: 1.180 mm, lebar bal: 700 mm, tinggi bal: 800 mm, berat bal: 350 kg, lebar total: 1.059 mm, tinggi total: 2.871 mm, panjang total: 1.838 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, arus masuk: 16 A, berat keseluruhan: 2.300 kg, masa garansi: 6 bulan, tinggi transportasi: 2.050 mm, daya: 4 kW (5,44 hp), tahun perombakan terakhir: 2025, lebar transportasi: 1.059 mm, panjang transportasi: 1.838 mm, jenis perlindungan (kode IP): IP54, frekuensi input: 50 Hz, panjang langkah: 890 mm, Perlengkapan: dokumentasi / manual, strautmann-umwelttechnik-pp1207-en Rodpfx Aev Rzwmehwsp

Kondisi: bekas, Tahun pembuatan: 1988, jam operasional: 1 h, nomor mesin/kendaraan: V 516, lebar total: 2.000 mm, panjang total: 7.000 mm, tinggi total: 1.800 mm, tekanan kerja: 300 batang, gaya penekanan: 90 t, tebal plat aluminium (maks.): 5 mm, daya: 11 kW (14,96 hp), berat kosong: 16.000 kg, gaya potong: 90 t, tahun perombakan terakhir: 2025, Package dimensions: 400x400 mm Redpfx Aelhqd Rshwep Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminum throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or with oil drip tray Location: Austria Available from: 30.01.2026

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, The BTS-MF450HD Special Baler is the ideal baler for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing bulky items like used tires and car bumpers to a minimum volume. The baler stands out with its simple and safe operation and large feed opening, making it perfect for medium to high material volumes. By compacting these waste/recyclable materials you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return materials to the recycling stream. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Press cycle time: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long twin cylinders for even and early material compaction User-friendly lever operation Bale ejector for easy bale removal Additional retaining claws to reduce material spring-back Holder for 4 rolls of strapping band A quality product "Made in Europe" Suitable for compacting: PET bottles Redpfx Ajvug Dyjhwop Food cans and tin containers Plastic canisters and plastic packaging Used tires and bumpers Big bags Cardboard and film Difficult-to-compact recyclables Additional options: Annual maintenance with UVV inspection Machine color as per RAL PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Vertical door Strapping bands / strapping wire Motor 11 kW 32 Amp The demo video shows the BTS-MF550HD Special Baler. Can compactor, can baler, PET baler, PET press, tire baler, used tire baler, tire press, can press, baler, paper press, waste paper press, cardboard press, cardboard baler, film press, paper baler, waste baler, waste compactor, waste press, residual waste press, recyclables press.

Tahun pembuatan: 2001, Kondisi: bekas, Images to follow – machine is currently undergoing overhaul. Technical specifications: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions, plus one saw blade holder - 9 material clamps Rsdpfot Ea Tfjx Ahwop - Tool holder SK30 - 2-layer machining

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: WK43/07, Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of manufacture: 2008 Output capacity: 18,000 - 22,000 cups/h Cup formats: round Ø 55 mm, round Ø 65 mm Sealing: aluminium Redpfoikvlmox Ahwop Compressed air: 6 bar, 800 l/min Water supply: 3 bar, 1.5 l/min Power supply: 3 x 400 V, 50 Hz, 15 kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3,500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley