Memotong gergaji

Stromab TR350

Kondisi: baik (bekas), Tahun pembuatan: 2005, OPTIMIZER POTONG STROMAB TR350 MATRIX 4-7000 Set rantai pemuatan sebanyak 8 unit. Panjang setiap rantai: 1.500 mm Pendorong terprogram, jangkauan 7.000 mm 4 kriteria optimasi Kemungkinan penghilangan mata kayu, penandaan dengan kapur Gusdpfx Aezcy Ncea Heg Kepala pemotong. Diameter cakram: 350 mm. 4 HP Penampang potong: 150 mm x 80 mm, ....., 210 mm x 30 mm Unit pengeluar/pengelompok dengan 2 ejektor pneumatik cepat. Sabuk penggerak bermotor Tahun 2005 CE

Kondisi: sangat baik (bekas), Direct drive Air flow: 12,000 m³/h Negative pressure: 4,880 Pa Guodpfx Aash Tfqhe Hog Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Outlet diameter: 400 mm Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Note on used machines: • Errors in technical specifications and prior sale reserved. • Stated prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen without any warranty claims. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries stating your address and telephone number!)

Kondisi: baru, Tahun pembuatan: 2026, Untuk penentuan jumlah lem yang profesional dan presisi pada lubang bor dowel dan alur dinding belakang. Ringkasan: • Jumlah lem yang selalu sama dan benar • Tidak memerlukan pembersihan sisa lem berlebih pada benda kerja Godpfxjdxz Tps Aa Hjug • Pembersihan sistem lem yang paling mudah dan minimal (sekali seminggu melalui program bilas) • Penghematan biaya lem • Pistol lem ergonomis dan ringan dibandingkan dengan botol lem • Pekerjaan lebih cepat dan lebih akurat dibandingkan dengan botol lem

Kondisi: hampir baru (bekas), Socolest DAS 200 Twin-Shaft Multirip Saw with Infeed and Outfeed Tables - Italian manufacture - Centering infeed table - Discharge outfeed table - Upper feed rollers TECHNICAL SPECIFICATIONS: - Cutting height: 200 mm - Cutting width: 400 mm - Motor power: 2 x 55 kW Godpfxjqup Ane Aa Heug - Track width: 630 mm - Maximum blade diameter: 350 mm - Feed speed: 40 m/min - Hydraulic height adjustment for shafts - Hydraulic adjustment of cutting height - Hydraulic feed - Four upper feed rollers - Four rows of anti-kickback fingers - Shaft diameter: 70 mm - Sleeve diameter: 90 mm - Pneumatic side centering pressure - Port diameter: 2 x 250 mm - Minimum workpiece length: 720 mm - Laser guide - Belt infeed table: 5700 mm - Table width: 600 mm - Pneumatic upper pressure roller - Table speed controlled by frequency inverter - Outfeed table: 9200 mm - Roller width: 800 mm - Roller diameter: 135 mm - Four discharge chains - Chain spacing: 1900 mm Transport dimensions: 1300 cm x 240 cm x 200 cm Weight: 8 t

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Max. working width: 1000 mm, feed rate: 5-20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Gedpfoi E Trpjx Aa Heug

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment Gujdpfx Aohlp D Noa Heg - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: baik (bekas), Tilting spindle moulder, table router, table milling machine Guedpfeh Nvyzsx Aa Heg - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Motor power: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her, 3 rollers - Usable shaft length: 100 mm - Spindle diameter: 30 mm - Max. cutter diameter: 220 mm - Dimensions (L/W/H): 1540/1100/1520 mm - Weight: 962 kg

Kondisi: bekas, Adhesive application Glue application Adhesive dispensing - Glue application for package heights up to 300 mm using 1 applicator roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Gsdpfecht Nyox Aa Houg Dimter accessories

Kondisi: bekas, Tahun pembuatan: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Gusdpfsiixxnjx Aa Heg Swivel adjustment with hand crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Kondisi: baru, es Gjdpjdy Hm Dsfx Aa Heug