TORNOS DECO 10

TORNOS DECO 10

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Diameter batang (maks.): 10 mm, produsen pengendali: FANUC, model controller: 16i-TB, jumlah sumbu: 9, Swiss lathe from 2006. This TORNOS DECO 10a comes equipped with an automatic, integrated bar feeder allowing for a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It features a Robobar SSF 3m loading magazine and is fitted with a FANUC 16i-TB control unit. If you are looking for a high-quality lathe, consider the TORNOS DECO 10a we have for sale. Contact us for further details. • Overhauled in 2016: • Machine, ball screws (replaced if required), linear guides, guide bushings, main spindle and counter spindle checked • Complete cleaning • Maintenance according to Block 3 carried out • All drive belts replaced • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/Features: • Sliding headstock • Oriented spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross-slide with 4 tool stations • Tool breakage detection sensor Additional equipment: Gedpfxsytcals Ah Djip • Automatic, integrated bar feeder (oil-bath) TORNOS-BECHLER type SSF-210, equipped with Robobar SSF 3m loading magazine • Max. bar length: 3.2 m • Bar passage: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without collet) • "HYBRIDE 10+5" drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25-litre hydraulic unit with filter • Front and rear stabilizer foot, centre height 1,100 mm • Electrical control cabinet (circuit diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Colour: Anthracite RAL 7016 / Grey RAL 7035 Technical Specification Counter Spindle: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: MS 1153, Angbot 23158 Technical Data (approx.): - Passage to blasting chamber: W 370 x H 170 mm - Blasting nozzle Godpfx Aollvr Doh Deip - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery - Separate control panel - Space requirement for blasting system: 1600 x 2000 x H 1750 mm - Space requirement for blast media vessel: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan: MUNK - SCHMITZ - Airflow: 700 – 1500 m³/h - Extraction fan power: 3 kW - Space requirement for filtration unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Diameter batang (maks.): 7 mm, jumlah sumbu: 9, Swiss lathe from the year 2000. This TORNOS Deco 10a features a movable headstock, an independent counter spindle, and a pivoting workpiece holder. It comes equipped with a magazine loader with a drum and a lubrication device for the guide bushings. If you are looking for a high-quality lathe, consider the TORNOS Deco 10a, which we have for sale. Contact us for further details. • Movable headstock • Direction-dependent spindle stop S1 • Cross slide with 4 tool holders T11-T24 featuring vertical and horizontal travel • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for the guide bush with filter • S2 motorization • Integrated 25-liter hydraulic unit with filter • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional Equipment Giedpfsyr Nflex Ah Djp • Magazine loader with drum (bar feeder) • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars (no bar preparation up to 8 mm) • 3 presettable turning tool holders • 4 fixed tool holders • Thread cutting device for collet ESX 12 • Front and rear support feet, center height 1100 mm Technical Specification Counter Spindle No

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. 2 similar machines available! Additional information: Gsdpfex D Dlisx Ah Doip • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Extensive set of measuring devices

Kondisi: baik (bekas), Max. gear diameter 250 mm with 3" cutter Module: 5.5 Hobbing length: 70 mm Cutter module: 5.5 Giodpfx Ahjgq Dgdo Dsp Max. recognized outside diameter: 300 mm Spindle diameter: 85 mm Table bore diameter: 39 mm Table outside centering diameter: Ø139.75 mm Electric tool motor (power): 4 HP Height: 1,800 mm Length: 1,450 mm Weight: 2,450 kg Width: 1,000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018) 2017 Overhaul Details: Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up. Gedpfx Ahjx D D Iks Dsip Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement • Absolute measurement system • 9 axes with C1 and C4 • Drum bar loader 'HYBRIDE 10+5' • 14 guide tubes for 1–4 mm bars • 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm • Tryton collet • 2 different hybrid drums • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar loader Technical Specification Counter spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, a direction-dependent spindle stop, and several cross slides with tool holders for versatile machining operations. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning applications. It includes interfaces for bar feeders and tool breakage detection. Further details on this machine are available upon request. Additional Information • Programming software TB-DBCO Version 6: Stand-alone product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: Axes S1/Z1, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming step 0.1 degree) • Cross slides: • 1 cross slide with 4 tool positions (axes X1 and Y1) • 1 cross slide with 3 tool holders (axes Z3 and X3) • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent cylinders for rapid positioning Gsdpox D Dm Hjfx Ah Doip • Counter spindle: Independent (S4), n = 12,000 rpm, collet F13 • Cross-slide support options: • Pre-settable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right-handed • S2 drive (electrical/mechanical) for powered attachments on the X2-Y2 linear tool carrier • Powered end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling/milling/tapping unit for collet BSX 12 • Sensor: Tool breakage detection with MIDI-DETECTOR type, mini-toggle probe MINI-DETECTOR type, electrical interface, pneumatic control devices • Interface: Adaption for an LNS bar feeder • Spindle speed: n = 16,000 rpm indicates the machine has a moderate spindle speed capacity • Additional: Comprehensive set of measuring devices Technical Specification Counter Spindle: Yes

Kondisi: bekas, Tahun pembuatan: 1988, Spitzenweite 1200 mm Drehzahl A) 70 - 380 U/min. Drehzahl B) 380 - 2000 U/min Gewicht 2,2 t Drechselbank +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Gijdpfxok Sat Ds Ah Dop Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2010. It features a sliding headstock, direction-dependent spindle stop, and cross slides equipped with tool holders. The machine is equipped with an independent counter spindle, a swiveling workpiece holder, and a lubrication system. Additional equipment includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, the TORNOS DECO 10a we are offering for sale is an excellent choice. Please contact us for further information. Additional Information: • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders Godjx D Dmtopfx Ah Dsip • 4 stationary tool holders • Sliding headstock • Direction-dependent spindle stop S1 • Independent counter spindle • Swiveling workpiece holder at the counter spindle • Lubrication device for guide bushings with filter • Thread cutting device for collet chuck ESX 12 • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive gauge package Technical Specification: Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 12.000 rpm, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This Swiss lathe TORNOS DECO 2000 was manufactured in 2000. It features a movable headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent counter spindle, a lubrication system, and a drum bar loader. It comes with a 'HYBRIDE 10+5' drum for bar stock up to 10 mm and an integrated hydraulic unit. For more information about this machine, please contact us. Additional Information • Electrical control cabinet • Motor voltage: 400 V Giedpfex D Dmysx Ah Djp • Control voltage: 24 V • Movable headstock • Cross slides with 4 tool stations T11-T24 with vertical and horizontal movement • Swiveling workpiece holder at the counter spindle • Direction-dependent spindle stop S1 • 3 presettable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Independent counter spindle • Thread cutting device for collet ESX 12 • Lubrication device for guide bush with filter • Drum-type bar loader • Integrated 25-liter hydraulic power unit with filter • Front and rear support feet, center height 1100 mm Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.100 mm, Meja bundar 1.250 x 1.400 mm (lingkaran gangguan 1.700 mm) Giedpsx Iuccsfx Ah Dep Heidenhain 530 Kepala frais diagonal dengan pengindeksan 1° x 1° Kecepatan putar hingga 5.000 rpm Penjepit alat SK50 Penukar alat dengan 40 posisi Pendinginan internal 19 bar Konveyor serpihan arah memanjang

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss lathe featuring a sliding headstock, direction-dependent spindle stop, and multiple tool holders for versatile operations. It includes an independent sub-spindle, a lubrication unit, and a drum magazine. Ideal for precision turning operations with a maximum bar capacity of 10 mm. Take advantage of this opportunity to purchase the Swiss TORNOS DECO 10e lathe. Contact us for further information. 2 similar units available! Additional Features: • Sliding headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool holders T11-T24, capable of vertical and horizontal movement • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • 3 presettable turning tool holders • Motorization S2 • Thread cutting unit for collet chuck ESX 12 • 4 fixed tool holders • Drum-style bar feeder magazine • Integrated 25-liter hydraulic power unit with filter • Front and rear support stands, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation required up to 8 mm) • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Max turning diameter: 10 mm Optional: Comprehensive set of measuring devices available Gijdpfjx D Dmmex Ah Dop Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This Tornos DECO 10e was manufactured in 2010. It is a Swiss sliding headstock lathe featuring a direction-dependent spindle stop and an independent sub-spindle. The machine comes equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. Designed for precise turning operations in small batch production, it supports bar diameters from 1 to 10 mm, with processing up to 8 mm possible without bar end preparation. Please contact us for further information regarding this machine. Additional Information • Electrical control cabinet Gsdsx D Dndspfx Ah Doip • Cross slide with 4 tool holders (T11–T24) with vertical and horizontal movement • 3 preset turning tool holders • 4 fixed tool holders • Thread cutting device for ESX 12 collet • Sliding headstock • Independent sub-spindle • Swivelling workpiece holder on sub-spindle • Lubrication device for guide bushing with filter • Drum-type bar feeder • Integrated 25-liter hydraulic power unit with filter • Front and rear support pedestal, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars, allowing up to 8 mm without bar end preparation • Motor voltage 400 V • Control voltage 24 V • Spindle drive motor speed n = 12,000 rpm Optional: Comprehensive measuring equipment package Technical Specification Counter Spindle: Yes

Kondisi: bekas, Raddurchmesser - max. 1000 mm Radbreite 160 mm Modul - max. 7 Modul - min. 0,5 Abstand Tisch - UK Stößel 230 mm Hubzahl 31 - 175 Hub/min Giodpfxsydfn Hj Ah Djp Werkzeugaufnahme MK 4 Gesamtleistungsbedarf 6 kW Maschinengewicht ca. 5,2 t

Kondisi: bekas, Tahun pembuatan: 2016, de Giedpfxjytf U Sj Ah Dsp