Mesin bubut otomatis

TORNOS deco 2000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018) 2017 Overhaul Details: Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement • Absolute measurement system • 9 axes with C1 and C4 • Drum bar loader 'HYBRIDE 10+5' • 14 guide tubes for 1–4 mm bars Gedpfex D D Ikjx Ah Dsip • 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm • Tryton collet • 2 different hybrid drums • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar loader Technical Specification Counter spindle: Yes

Kondisi: bekas, drehdurchmesser-260-osp500 Giodpfxowm Rrds Ah Dop

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 75.336 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: T62204, Perlengkapan: dokumentasi / manual, TECHNISCHE DATEN - Achszahl: 10 - Spindelanzahl: 2 HAUPTSPINDEL - Max. Stangendurchmesser: 25,4 mm - Max. Bearbeitungslänge: 200 mm - Spindeldrehzahl: 10.000 U/min - C-Achsen-Indexiergenauigkeit: 0,1° GEGENSPINDEL - Max. Stangendurchmesser: 20 mm - Spindeldrehzahl: 10.000 U/min - Spindelleistung: 3,7 kW - C-Achsen-Indexiergenauigkeit: 0,1° - Anzahl Führungsbuchsenhalter: 2 FÜHRUNGSBUCHSENHALTER 1 - Positionen: 5 FÜHRUNGSBUCHSENHALTER 2 - Positionen: 5 - Angetriebene Positionen: 4 - Drehzahl angetriebene Werkzeuge: 8.000 U/min FRONTBEARBEITUNG - Positionen: 4 - Angetriebene Positionen: 4 - Drehzahl angetriebene Werkzeuge: 6.000 U/min Gijdpfow Stndox Ah Dsp RÜCKSEITENBEARBEITUNG - Positionen: 7 - Angetriebene Positionen: 3 - Drehzahl angetriebene Werkzeuge: 8.000 U/min STROMVERSORGUNG - Netzspannung: 400 V - Gesamtanschlussleistung: 14 kW GEWICHT & ABMESSUNGEN - Stellfläche der Maschine: 2.270 x 1.650 mm - Maschinenhöhe: 2.200 mm - Maschinengewicht: 3.500 kg AUSSTATTUNG - CNC-Steuerung: Fanuc - Angetriebene Werkzeuge an: S2, S3, S5 vertikal/horizontal - Drehbare Führungsbuchse - Teilefänger - Werkstückauswurf - Kühlmitteltank - Stangenlader: ROBOBAR SSF

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: Spindle bore: 25 mm Gijdpfjtwglaox Ah Djp Item: CNC Swiss-type automatic lathe Manufacturer: Tornos Model: Deco 2000/20 Year of manufacture: 2001 Control: Fanuc Spindle bore: D25 mm Max. spindle speed: 7,000 rpm Tool carriers: 2 (X, Z, Y axes) Front attachment: 1 (X, Z, S axes) Bar loader: Tornos Robobar SSF Chip conveyor: Hinged belt chip conveyor Additional equipment: various accessories such as polygon turning device, high-frequency spindle Please contact us for further information and photos via email (at) or *

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Swing length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, quill diameter: 125 mm, quill stroke: 280 mm, connected load: 62 kW. Machine dimensions X/Y/Z: approx. 6500 mm/2500 mm/2300 mm. Control system: Heidenhain, operating hours: approx. 9,000 h. Includes accessories such as a steady rest. Documentation available. An on-site inspection is possible. Godpfx Ahjvwcwue Doip

Kondisi: bekas, deco2000-2024 Godpfx Aoxx U I Reh Dsip

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Dimensions: - Length: 2000 mm - Width: 1260 mm - Height: 1950 mm Weight (empty): 2550 kg Specific floor loading: Approx. 8 daN/cm2 Axes - 1 sliding headstock: Z1, S1 - 2 independent linear tool systems on the vertical axis: X1 / Y1 (S6) – X2 / Y2, S2 - 1 front unit, 4 spindles: X3 / Z3 - 1 independent pick-off spindle: Y4 / Z4, S4 - 1 independent tooling system for backworking: X4 (S5) General Data - Bar capacity: For min. remnant: 13 mm - For max. remnant: 16 mm - Max. workpiece length (with rotating guide bush): 180 mm - Work in collet: 30 mm - Main spindle speed: 12,000 rpm - Spindle rotation: Preferably: Right-hand - Main spindle drive: Continuous operation: 2.2 kW - Intermittent operation: 3.7 kW - Pick-off spindle drive: Continuous operation: 1.5 kW / Intermittent operation: 2.2 kW - Spindle collet type: F20 - Guide bushes: Rotating, fixed - Type of guide bush collet: Meister: 605 - Number of tools in main operation: Fixed: 2 x 5 / Driven: 3 + 3 - Number of front tools: Fixed: 4 / Driven: 3 - Tool cross-section: 12 x 12 - Rotating tool collets, standard: ESX 20 - Number of tools in backworking: Fixed: 3 + 3 / Driven possible: 3 + 3 - Bar loader: Yes - Parts removal: Basic version - Machine type: Sliding headstock - Centre height: 1100 mm - Headstock stroke: 255 mm - Bar guide position: Right side of operator - Bar capacity: 1-16 mm - Teleskop tube bore: 6-17 mm - Spindle speeds: Left / right: -12,000 to 12,000 rpm - Headstock feed speed: Max. 20 m/min Gsdpjmdn Imefx Ah Deip We do not assume any liability for the correctness, completeness or up-to-dateness of the information.

Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07-16 1990, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 800 mm, Dijual mesin dalam kondisi baik seperti terlihat di gambar, diproduksi tahun 1990 dan dilengkapi dengan kontrol NCT 90. Mesin ini sangat jarang digunakan dan dijual karena kurang dimanfaatkan. Berat total mesin adalah 33 ton. Mesin sepenuhnya berfungsi. Pembongkaran dan pengiriman menjadi tanggung jawab pembeli. Gedpfxsw Sx Agj Ah Dsip

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Sumbu X 1.500 mm Sumbu Y 660 mm Sumbu Z 600 mm Ukuran meja 1.680 x 660 mm Kecepatan spindle 12.000 rpm Konektor alat SK40 Penukar alat 24 posisi Kontrol ULTIMAX 4 Termasuk sumbu ke-4 Kitagawa MR 200 (sumbu putar + tailstock) Termasuk konveyor serpihan Termasuk pendinginan internal alat (IKZ) Gjdpfx Ahsxm Tufj Deip

Kondisi: bekas, Tahun pembuatan: 1969, Wheel diameter – max. 160,175 mm Wheel width 355 mm Module – max. 4.5 Spindle bore 75 mm Centre distance (between centres) 410 mm Number of teeth – min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Gisdpfx Ahevzhf Se Dep Centre distance between cutter and workpiece – max. 138 mm Centre distance between cutter and workpiece – min. 30 mm Milling head – swivelling 120° Cutter speeds 70 – 400 rpm Axial feeds 0.25 – 4.0 mm/rev Radial feeds 0.09 – 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation