Tekan pneumatik

Tox Pressotechnik MAG 008

Kondisi: bekas, Tahun pembuatan: 2016, Press tiang Tox 4 Mag 008.288 A.001 Tahun 2016 Gaya tekan: 80 kN Fsdpfx Aew D R I Tebhopc Total langkah: 180 mm Langkah tenaga: 12 mm Berat mesin: 760 kg

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l Fedpfxefxyhfj Abhopc The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), SMG HZPU 8000-3000/2100-S1 Hydraulische Ziehpresse Marke: SMG Typ: HZPU 8000-3000/2100-S1 Fjdpfx Aen Awd Rjbhjpc Baujahr: 1995 Beschreibung: Hydraulische Ziehpresse, H-Rahmen-Bauweise Presskraft: 800 t Spannfläche: ca. 3.000 x 2.100 mm Einbauhöhe: max. 1.400 mm

Kondisi: baik (bekas), Tahun pembuatan: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture: 1983 (Czech Republic). Double-swivel milling head (new bearings, new gears). Horizontal support beam with sight. Specifications: Table: 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Spindle speed range: 45-1400 rpm. Fpsdpfxodqp Eue Abhsc Main motor power: 15 kW. Total power requirement: 23 kW. Dimensions: Length x Width x Height: 3200 x 2475 x 2620 mm. Weight: 6500 kg.

Kondisi: bekas, Tahun pembuatan: 2015, TIPE: L13 / S0540C0311 Tahun pembuatan: 2015 Laser aktif: 33.112 jam Sinar aktif: 8.166 jam Daya: 5.000 W Perjalanan X: 4.000 mm Perjalanan Y: 2.000 mm Perjalanan Z: 750 mm Perjalanan B: ±135° Fpsdpfxsxd Uawj Abhec Perjalanan C: n*360° Layar: TFT 12" Antarmuka: SINUMERIK 840D

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), Max. pressing force: 80 kN, stroke: 180 mm, power stroke: 12 mm, weight: 760 kg. Fpsdpfsifptyox Abhjc

Kondisi: baru, - Capacity 1270 x 1.5 mm - Taper rolling - Removable top roll - Foot control - Emergency stop - Documentation - 400V Fodpjh Ralqofx Abhjpc

Tahun pembuatan: 1986, Kondisi: hampir baru (bekas), de-gebrauchte PJ Hare ltd C-Rahmen Hydraulikpresse zu verkaufen: PJ Hare Limited Hydraulikpresse zu verkaufen PRESSENMODELL: 25HP Gesamthöhe (mm): 2425 Gesamtbreite (mm): 1120 Gesamttiefe (mm): 1470 Gewicht (kg): 2000 Befestigungsloch-Ø (mm): 18 Befestigungsloch-Abstand (mm x mm): 610 x 1108 Aufspannplatte (mm x mm): 120 x 250 Ölkapazität (l): 50 Max. Luftversorgungsdruck (bar): 6 Min. Luftversorgungsdruck (bar): 4 Leistung Hauptmotor (kW): 7,5 Motorsicherungswert (A): 20 Komplett mit Pressenpolster Elektrische Anschlussdaten: Mindest-Sicherungswert (A): 35 Mindest-Querschnitt Zuleitung (mm²): 2,5 MODELL 25HP: Presskraft (t): 25 Presskraft (kN): 250 Stößelkraft (t): 3,1 Eilhubgeschwindigkeit Stößel: 425 Pressgeschwindigkeit Stößel: 35,1 Rücklaufgeschwindigkeit Stößel: 289 Motorleistung (kW): 7,5 Gewicht ca. (kg): 2000 Max. Hub (mm): 150 Schutzöffnungsbreite (mm): 680 Schutzöffnungshöhe (mm): 300 Min. Stößel unten (mm): 200 Max. lichter Abstand (mm): 450 Hubverstellung (mm): 100 Ausladung (mm): 250 Tisthöhe (mm): 900 Fpsdpfohcfyuox Abhjc Tischbreite (mm): 650 Tischtiefe (mm): 480 Abstand vorn zur Mitte (mm): 250 Durchgangsloch-Ø (mm): 150 Freiraum unter Tisch (mm): 350/250 T-Nuten (mm): 18, 15, 34, 33 Tischdicke (mm): 95 Seitlicher Ausschub – Vertikaler Ausschub (mm): 255 Öffnung in Ausladung Breite/Höhe (mm): 250/250 Oberstößel Breite (mm): 420 Oberstößel Tiefe (mm): 220 Befestigungsloch Oberstößel (mm): 370, 170, 13 Werkzeugaufnahme-Ø (mm): 40 Werkzeugaufnahmelänge (mm): 65 Befestigungsloch-Ø (mm): 18 Gesamttiefe (mm): 1400 Gesamtbreite (mm): 900 Gesamthöhe (mm): 2450 Befestigungslochabstände (mm): 1110 Hare Pressen gebraucht zu verkaufen Neue C- und H-Rahmen Hydraulikpressen lieferbar

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2386, tinggi pemasangan: 280 mm, gaya penekanan: 25 t, lebar meja: 440 mm, panjang meja: 320 mm, panjang langkah: 100 mm, Hydraulically overhauled SCHOEN double column press TES 25 Year of manufacture: 1979/2025 Press force: 250 kN Installation height: 280 mm Stroke: 100 mm Fjdpfx Absvw Spmshepc Table width: 440 mm Table depth: 320 mm The machine is being completely overhauled - new control system - new light barriers - reconditioned hydraulics

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Speroni STP tool presetting device with PC & software Condition: Used. Excellent condition. The Speroni STP tool presetting device is a professional measuring and presetting system for rotary tools in CNC manufacturing. With its precise optics, robust mechanics, and user-friendly software, it enables fast and accurate presetting of tool lengths and diameters before they are loaded into the machine. This unit comes complete with a PC system, including monitor and software, and is ready for immediate use. Technical details: Fpedpfjxwp D Rox Abhjc - Manufacturer: Speroni S.p.A. (Italy) - Model: STP Essentia / STP Magis (depending on version) - Type: Tool presetting device Equipment: - Precision measuring column with camera unit - Monitor and PC system (Dell) - Keyboard and mouse - Presetting software with tool data display Measuring range: - X-axis: up to approx. 400 mm - Z-axis: up to approx. 400 mm - Spindle mounting: ISO / HSK-compatible (interchangeable) Additional features: - Precise tool measurement outside the machine - Increases machine uptime and productivity - Robust construction and high-quality optics - Intuitive software interface - Ideal for CNC manufacturing, toolmaking, and production You can see the original invoice in the documents below.