Pusat penggilingan balik CNC

Traub TNX65

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Deskripsi menyusul Itedpfx Aox A Hdfoahjr

Kondisi: bekas, Tahun pembuatan: 2003, Steuerung 840D-PCU 50 V1 Tersedia: 3 unit Pendingin: ya Ijdpfxeqn A Rro Aahetr Konveyor serpihan: ya Arus nominal generator: 110 A Daya terpasang: 56 kW

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Itjdpfxjwp D Nbo Aahsr with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Iodew E Nnbepfx Aahjtr Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 47.600 h, nomor mesin/kendaraan: 325, System: TX8H Spindle bore: 80 mm Maximum turning length: 750 mm Turning diameter: 340 mm Power: 22 kW Number of tool holders: 12 Shank diameter: 40 mm Driven tools at all positions Itjdpfjh Dzqljx Aahsr X axis Z axis C axis Automatic tailstock Chip conveyor

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm Itedpfxjuhadze Aahor - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 51.400 h, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed holders Short bar loader Breuning Itodpfowxc Hkex Aahor Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Under power, can be inspected Delivery time approx. 2 weeks by arrangement

Kondisi: baik (bekas), Tahun pembuatan: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, sub spindle: 12 mm Iodpfxst E Dbys Aahstr Sub spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Including (list not exhaustive): - Traub TNL 12/7 CNC Lathe - Meyrat high-frequency spindles, 2 pieces - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of delivery as per photo documentation No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Traub TNX 65/42 Fräs- und Drehzentrum Baujahr 2007 Seriennummer: 7060107 Inbetriebnahme: 2010 TX 8i-S Steuerung (Mitsubishi/Traub-basierte Steuerung mit Mitsubishi-Antrieben und -Motoren) 15 CNC-Achsen Vier (4) X-Y-Z Revolver mit jeweils 10 Positionen (bis zu 20 Werkzeuge je Revolver möglich) 65 mm Spindeldurchlass an Haupt- und Gegenspindel (Gegenspindel mit Kühlmittelspülung) Fußpedalsteuerung zum Spannen/Lösen der Spannfutter Servogesteuerte Portaleinheit Hydraulisch schwenkbar mit pneumatischem Fertigteil- und Reststückgreifer Fertigteilförderband RESY Papierband-Kühlschmierstofffilter Knoll-Kühlmitteltank mit BKW Kältemittel-Temperaturregelung 20 bar Hochdruck- und 8 bar Niederdruck-Kühlmittelpumpen Knoll Späneförderer FMB Turbo 5-55 Stangenlademagazin (neu 2010) 2 Einzelstangen-Drehhalter 2 Doppelstangen-Drehhalter 1 Abstechhalter 1 angetriebener doppelter radialer ER Spannzangenhalter Itsdpfjq Npqmjx Aaher 1 angetriebener radialer ER Spannzangenhalter 4 radiale angetriebene ER Spannzangenhalter 1 radialer angetriebener Fräserhalter 1 winkelverstellbarer angetriebener ER Spannzangenhalter 2 radiale angetriebene Messerkopfhalter 2 axiale angetriebene Fräserhalter 6 axiale angetriebene ER Spannzangenhalter 43 zusätzliche Werkzeughalter auf separater Liste (siehe Anhang) Hainbuch Hauptspindel-Spannzangenfutter Röhm 2-Backen-Futter an der Gegenspindel 2 Ersatzsätze Kugelumlaufspindeln und Lagerpakete für die Z-Achse.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 8.052 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.875 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.345 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, panjang pemakanan sumbu X: 1.875 mm, panjang umpan sumbu Y: 1.250 mm, panjang umpan sumbu Z: 1.345 mm, kecepatan pemakanan sumbu X: 24.000 m/menit, laju pemakanan gandar Y: 24.000 m/menit, laju pemakanan sumbu Z: 24.000 m/menit, torsi: 3.430 Nm, berat benda kerja (maks.): 4.000 kg, tinggi total: 4.950 mm, panjang total: 7.029 mm, lebar total: 5.200 mm, kecepatan rotasi (min.): 10 rpm, kecepatan rotasi (maks.): 10.000 rpm, berat keseluruhan: 51.200 kg, kecepatan spindel (min.): 1 rpm, kecepatan spindel (maks.): 500 rpm, jarak dari tengah meja ke hidung spindel: 1.600 mm, daya motor spindle: 37.000 W, hidung spindel: A2-11, panjang alat: 300 mm, jenis arus masuk: AC (pendingin udara), diameter pembubutan: 1.450 mm, diameter putar di atas sled silang: 1.250 mm, diameter spindel: 160 mm, saluran batang: 160 mm, diameter luar chuck: 500 mm, lubang collet: 160 mm, gaya umpan sumbu X: 20.000 N, gaya umpan sumbu Y: 20.000 N, gaya makan sumbu Z: 25.000 N, panjang spindle milling: 300 mm, diameter quill: 160 mm, gores kuas bulu: 250 mm, jarak gerak quill: 250 mm, lubang spindel: 160 mm, diameter ayun di atas peluncur melintang: 1.450 mm, diameter ayun di atas peluncur silang: 1.250 mm, diameter ayunan di atas alas atas: 1.100 mm, diameter pembubutan di atas alas geser: 1.300 mm, panjang pembubutan: 1.600 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, For sale: Mazak Integrex e-1250 V/8 mill-turn center with extensive accessories and a Mazak Palletech High Rise (800B) automation system. The system combines milling, turning, and automated pallet handling – ideal for complex workpieces in a single setup. _____ Technical Data – Integrex e-1250 V/8 • Travels: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 stations (CAPTO) • Control: Mazak SmoothX with 5-axis functions • Machining operations: milling, turning, drilling, tapping, 5-axis simultaneous machining Isdpfx Aaexgu E Eohjtr • Coolant unit: high-pressure system up to 70 bar, Mayfran conveyor filter system, oil separator, coolant guns • Accessories: Tool Eye, Renishaw probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-machining functions • Cylindrical & polar interpolation (EIA) • Tool length & radius compensation (5-axis) • Spline fine interpolation (EIA) • Mazatrol turning/milling functions • MT Connect adapter for networking _____ Automation – Palletech High Rise (800B) • Pallet transport system (mixed type) • Expandable high-bay solution for flexible manufacturing • Ideal for series and mixed production • Note: Pallets to be sourced separately _____ Special Features • Complete documentation (digital & paper) • All-inclusive package: machine + automation + accessories _____ Your Benefits • “Done in One®” concept: all machining in a single setup • Productivity: 5-axis machining + turning + pallet automation • Flexibility: from single parts to series production • Efficiency: automatic pallet changer & integrated measurement technology 📍 Location: Southern Germany 👉 Price and delivery conditions upon request