Mesin pembengkok mandrel

unbekannt 1200/740/H1220 mm

Kondisi: baik (bekas), Tahun pembuatan: 2002,

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame Hsdpfx Ashpktvogkonn - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Tahun pembuatan: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y-axis rapid speed: 160 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 140 mm/s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms Hsdpjfifg Hofx Agkenn 2 rear gauge fingers X-axis travel speed: 250 mm/s R-axis working speed (max.): 140 mm/s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor as well as linear guide and ball screw Backgauge fingers with height adjustment (R-axis, manual) CE die holder system (upper dies) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, according to worldwide standards Electrical equipment according to worldwide standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg

Kondisi: baru, Model designation Hsdpfxegvquwe Agkjnn Shark 332-1 CCS

Kondisi: baru, Tahun pembuatan: 2026, CORMAK HBS275 Band Saw for Cutting Pipes, Profiles, and Bars is widely used in all locksmith workshops where cutting precision, quality, and speed are essential. This model features a swiveling arm from 0 to 60°, and the saw guides are based on carbide inserts. The frame's design ensures accurate and quiet operation. Machine Features The horizontal metal band saw with a swiveling arm allows cutting both perpendicular to the material axis and at any selected angle from 0 to 60°. The material can be fed manually or by any mechanical device, while the saw feed operates automatically. The blade guides are equipped with special carbide pads and bearings, which have a significant impact on the guidance, longevity, straightness, accuracy, and cutting quality of the blade. Carbide guidance greatly reduces wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed coolant circulation system. The saw arm is made from a single cast iron piece. Used with a 27 mm wide saw blade, this enables consistent batch cutting of both profiles and solid materials. The vise is positioned on an adjustable bed and features a quick-release clamp. Blade guides feature carbide pads and a roller bearing system, ensuring straightness and precision of cutting—features directly attributable to the use of carbide guides. The base supports a cast iron worktable with a swiveling arm and a control console mounted on a separate arm. In operation, the primary cutting motion is provided by the movement of the band saw blade, with the arm descending as the feed. The descent speed (cutting speed) is regulated via a hydraulic cylinder. Feed rate is set on the saw's control panel. Two band speeds are available: 37.5 and 75 m/min. Upon completion of a cut (when the arm is lowered), the saw blade drive switches off automatically. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle finishes or any guard is opened. Additional protection includes automatic shutdown if the blade breaks. Power transmission uses a motor with a worm gearbox. A motor with a thermal overload switch protects against overheating during operation. Technical Specifications Hnodpfx Aeudi Unsgken TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VICE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (WITH ARM RAISED): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacities: Angle | Round | Flat | Square -----|-----|-----|----- 0º | ø220 | 260 x 140 | 200 x 200 45º R | ø160 | 160 x 140 | 160 x 160 60º R | ø100 | 120 x 100 | 100 x 100 Note: The price does not apply to machines purchased in Poland.

Kondisi: bekas, Pressing force 160 t Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t Hodpsiulkqsfx Agksnn - Table size: 1000x1000 mm - Distance table/ram, large stroke top, adjustment top: 800 mm Additional information Extendable table

Kondisi: baru, Round bar: 30 x 1 mm Square tube: 30 x 30 x 1 mm Solid round bar: 16 mm Solid square bar: 30 x 10 mm Rotation speed: 9 rpm Total power requirement: 1.1 kW Machine weight: approx. 0.32 t Space requirement: approx. 0.82 x 0.60 x 1.26 m Hnedpfeh D Svnex Agksn Electric profile bending machine with - 5 sets of rollers: 2x for round bar (20 mm and 30 mm), 1x for flat bar, 1x for square bar, 1x for ? - Foot switch with emergency stop

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm → Maximum bending capacity tube 42.4 x 2 mm (stainless steel 0.2 = 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for bending, feed, and rotation axes. The touchscreen control enables straightforward and intuitive programming and operation of the machine. After loading the tube, it is secured by the chuck in the carriage. This enables precise positioning of the tube, ensuring contour-accurate geometries. Standard features include geometry control before the bending process: if the bending process is initiated at the wrong position, the machine will not grant approval, thus eliminating operator error. Optional features add convenience, boost output, and therefore increase system efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing pipe geometries can be imported using the software. Standard Equipment: → Servo drive for bending axis 1.5 kW → Adjustable rotational speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation Hnsdpstr U Hlofx Agken → Data transfer via LAN network or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The controller directly calculates the feed values and bending angles after entering length and angle values. Power supply: 400V 16A Dimensions: L: 2.3m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. Hodpfx Agod Hintekonn The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Technical Data – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Kondisi: bekas, Rolling machine Hnedpfx Aecq Nhcegkon Max. saw blade width 220 mm