Kamar uji kejut –80 °C hingga +220 °C

Vötsch VT 7012 S2

Tahun pembuatan: 2000, jam operasional: 104.382 h, Kondisi: sangat baik (bekas), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Cycling The temperature shock test evaluates the resilience of components, devices, and various products against rapid changes in ambient temperature. The test specimens are subjected to swift temperature fluctuations in air, with alternating upper and lower temperature loads. Through these cyclic stresses and the accelerated aging caused by temperature shifts, potential weak points in the test specimen can be identified. Key Features: - Vertical arrangement of test chambers - Ball screw drive ensuring secure carriage movement - Carriage load capacity: 50 kg (VT3 7012 S2) - Mesh grating on all sides of the carriage secures the specimens - High recirculation rate, short temperature change times, and uniform temperature distribution in the test space - Hot chamber can be used as a temperature storage unit, cold chamber as a temperature cycling device - Minimal energy consumption - No compressed air required Technical Data: Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling system: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen feed External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Fjdex Exmtepfx Acuegk Depth: 650 mm Height: 410 mm Protection Ratings: Device: IP42 Control panel: IP20 Control cabinet: IP54 Temperature Test Specifications (Single-chamber operation): Temperature range: - Hot chamber: +50°C to +220°C - Cold chamber: -70°C to +70°C Temporal temperature deviation: ±2 K (after stabilization) Spatial temperature deviation: ±2 K (after stabilization, in the carriage) Heating rate (hot chamber): 11 K/min Cooling rate (cold chamber): K/min Heating rate (cold chamber): 2 K/min Cooling rate (hot chamber): K/min Viewing window: 355 x 355 mm Cable entry port: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg More articles—both new and used—can be found in our shop! International shipping rates available on request!

Kondisi: sangat baik (bekas), Vötsch Model: VT 7012 S2 Air-cooled shock test chamber Two-chamber design Hot chamber: Temperature control range for the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change (heating): 11 K/min Cold chamber: Temperature control range for the cold chamber: -80°C to +70°C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change: - Heating: 2 K/min - Cooling: 3 K/min Test chamber volume: 125 liters Temperature range (hot chamber): +50°C to +220°C Temperature range (cold chamber): -80°C to +70°C Test chamber dimensions: Fodjwxc I Ujpfx Acuegk - Width: 470 mm - Depth: 650 mm - Height: 410 mm External dimensions: - Width: 930 mm - Depth: 2115 mm - Height: 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +10% 50Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1000 kg For your safety as a buyer, the following information: The following measures are carried out on all chambers offered by us in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Modifications and errors in the technical data, as well as changes, are reserved!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), We are offering a Vötsch shock test chamber. Temperature Shock Test Cabinet, Water-Cooled Two-chamber configuration Hot Chamber: - Temperature range: +50°C to +220°C - Temporal temperature deviation at the center of the usable space: ±1 K - Spatial temperature deviation: ±2 K - Temperature change rate (heating): 11 K/min Cold Chamber: - Temperature range: -80°C to +70°C - Temporal temperature deviation at the center of the usable space: ±1 K - Spatial temperature deviation: ±2 K - Temperature change rate: heating 2 K/min, cooling 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test space dimensions (WxDxH): 470 mm x 650 mm x 410 mm External dimensions (WxDxH): 930 mm x 2115 mm x 1970+ mm Port diameter: 67 mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6%/-10% 50Hz Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, the following information: The following points are carried out in advance for the chambers we sell: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate Fgedpeigg Hnjfx Acusk 4. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Here we offer a Vötsch shock test chamber. Temperature Shock Test Cabinet, Water-cooled Two-chamber design Hot Chamber: - Temperature range: +50°C to +220°C - Temporal temperature deviation at the center of usable space: ±1 K - Spatial temperature deviation: ±2 K - Temperature change rate: heating 11 K/min Cold Chamber: - Temperature range: -80°C to +70°C - Temporal temperature deviation at the center of usable space: ±1 K - Spatial temperature deviation: ±2 K - Temperature change rate: heating 2 K/min, cooling 3 K/min Test chamber volume: 125 liters Temperature range Hot Chamber: +50°C to +220°C Temperature range Cold Chamber: -80°C to +70°C Internal dimensions (WxDxH): 470 mm x 650 mm x 410 mm External dimensions (WxDxH): 930 mm x 2115 mm x 1970 mm Port diameter: 67 mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerant: R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant Fsdpfxjn Arc Ae Acuogk 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a trial run which is monitored using calibrated instruments. Model: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to assist you by phone.