Ruang uji kejut -80 ° C hingga + 220 ° C

Vötsch VT 7012 S2

Kondisi: sangat baik (bekas), Vötsch Ffodpfewxc I Uox Abhou Model: VT 7012 S2 Air-cooled shock test chamber Two-chamber design Hot chamber: Temperature control range for the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change (heating): 11 K/min Cold chamber: Temperature control range for the cold chamber: -80°C to +70°C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change: - Heating: 2 K/min - Cooling: 3 K/min Test chamber volume: 125 liters Temperature range (hot chamber): +50°C to +220°C Temperature range (cold chamber): -80°C to +70°C Test chamber dimensions: - Width: 470 mm - Depth: 650 mm - Height: 410 mm External dimensions: - Width: 930 mm - Depth: 2115 mm - Height: 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +10% 50Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1000 kg For your safety as a buyer, the following information: The following measures are carried out on all chambers offered by us in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Modifications and errors in the technical data, as well as changes, are reserved!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, de Ffsdpfx Abewt Unveheu

Kondisi: sangat baik (bekas), Here we offer a Vötsch shock test chamber. Ffjdpfx Ajn Arc Ajbhju Temperature Shock Test Cabinet, Water-cooled Two-chamber design Hot Chamber: - Temperature range: +50°C to +220°C - Temporal temperature deviation at the center of usable space: ±1 K - Spatial temperature deviation: ±2 K - Temperature change rate: heating 11 K/min Cold Chamber: - Temperature range: -80°C to +70°C - Temporal temperature deviation at the center of usable space: ±1 K - Spatial temperature deviation: ±2 K - Temperature change rate: heating 2 K/min, cooling 3 K/min Test chamber volume: 125 liters Temperature range Hot Chamber: +50°C to +220°C Temperature range Cold Chamber: -80°C to +70°C Internal dimensions (WxDxH): 470 mm x 650 mm x 410 mm External dimensions (WxDxH): 930 mm x 2115 mm x 1970 mm Port diameter: 67 mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerant: R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a trial run which is monitored using calibrated instruments. Model: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -74.5°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range, hot chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Fjdpfx Abjx Hhfhehsfu Scope of delivery: (see picture) (Subject to change and error in the technical data and specifications!) Should you have any further questions, we are happy to answer them by phone.

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Ffedpfjvt D D Uox Abhju Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° - Direct position measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gearbox stages - Fully enclosed cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Kondisi: sangat baik (bekas), Vötsch type: VT 7012 S2 water-cooled Hot chamber: The temperature control range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at centre of usable space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change Heating: 11 K/min Cold chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at centre of usable space: ±1 K Spatial temperature deviation: ±2 K Rate of temperature change Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 litres Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port: ∅ 67 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 25 A Fodpox E Tkaefx Abhsfu Refrigerants: R404A / R23 Weight: 1000 kg Important safety information for buyers: The following checks and services are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. New charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and details subject to change and errors!) If you have any further questions, feel free to contact us by phone.

Tahun pembuatan: 2000, jam operasional: 104.382 h, Kondisi: sangat baik (bekas), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Cycling The temperature shock test evaluates the resilience of components, devices, and various products against rapid changes in ambient temperature. The test specimens are subjected to swift temperature fluctuations in air, with alternating upper and lower temperature loads. Through these cyclic stresses and the accelerated aging caused by temperature shifts, potential weak points in the test specimen can be identified. Key Features: - Vertical arrangement of test chambers - Ball screw drive ensuring secure carriage movement - Carriage load capacity: 50 kg (VT3 7012 S2) - Mesh grating on all sides of the carriage secures the specimens - High recirculation rate, short temperature change times, and uniform temperature distribution in the test space - Hot chamber can be used as a temperature storage unit, cold chamber as a temperature cycling device - Minimal energy consumption - No compressed air required Technical Data: Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling system: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen feed External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Protection Ratings: Device: IP42 Control panel: IP20 Control cabinet: IP54 Temperature Test Specifications (Single-chamber operation): Temperature range: - Hot chamber: +50°C to +220°C - Cold chamber: -70°C to +70°C Temporal temperature deviation: ±2 K (after stabilization) Spatial temperature deviation: ±2 K (after stabilization, in the carriage) Heating rate (hot chamber): 11 K/min Cooling rate (cold chamber): K/min Heating rate (cold chamber): 2 K/min Cooling rate (hot chamber): K/min Viewing window: 355 x 355 mm Cable entry port: 67 mm Ffodjx Exmtepfx Abhju Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg More articles—both new and used—can be found in our shop! International shipping rates available on request!

Kondisi: sangat baik (bekas), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation +20°C: 3000 W Heat compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1280 mm x Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10.5 kW Nominal current: 22 A Circuit protection (on-site): 32 A slow-blow Sound level at 1m distance (free field measurement): < 69 dB(A) Fedpfx Aohh H Hiobhsfu Side port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your safety as a buyer, please note the following information! The following steps are carried out on all our listed chambers in advance: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data and information!) We would be happy to answer further questions by phone.

Kondisi: sangat baik (bekas), We are offering a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 litres Internal dimensions: width 560 mm, depth 350 mm, height 630 mm External dimensions: width 850 mm, depth 1030 mm, height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Fodjhrdy Sepfx Abhjfu Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerants: R-404A / R23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) Further questions can be answered for you by phone.

Kondisi: sangat baik (bekas), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity Control (Air-Cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Overall Dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C time deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Testing: Temperature range: -70°C to +180°C Temperature deviation in steady-state, according to IEC 60068-3-5 dependent on test chamber temperature time deviation: ±0.1 to ±0.3 K Fodpfoxfh Spox Abhsfu spatial deviation: ±0.5 to ±1 K Humidity range: 10% to 98% RH Electrical Connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Fuse protection: 16 A slow-blow, provided by customer Refrigerants: R-404A/R23 Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.