Mesin deburring lembaran logam

Ventus

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Kfsdpfx Asd Ixadjahea Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Kodsd Ev Upjpfx Aahofa Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, tegangan masuk: 400 V, berat keseluruhan: 3.560 kg, tinggi benda kerja (maks.): 170 mm, The high-speed deburring machine for deburring, edge rounding, and finishing of steel parts up to 600 mm width. This deburring and finishing machine from Q-Fin is specifically designed for applying a large radius of up to 2 mm on steel sheets. With the Q-Fin SER600 Super Edge Rounder, it is possible to deburr, grind, edge-break, round, deslag, remove oxide layers, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it suitable for processing steel cut parts and other ferromagnetic materials. The machine features 5 processing stations and is conveniently operated via an HMI touchscreen on the machine's front. The first station of the SER600 consists of a grinding unit. The abrasive belt of this unit removes burrs and/or burn marks from the product surface. If no burrs are present, the abrasive belt can be omitted or removed. It is also possible to finish the product with a finer abrasive belt or with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations comprise 2 round brushes rotating in opposite directions (left/right). With the brushes, you can break sharp edges or—thanks to the unique combination of two brush systems—apply a radius of up to R=3 mm. By installing special brushes, the SER600 with magnet system is also highly effective for removing oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without pressure loss. This extraction system, made entirely of stainless steel, is a wet operating unit that removes grinding dust from stainless steel, steel, and aluminum, eliminating fire and explosion risks. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or in the work environment. Kedpfxel Dw D Eo Aahofa Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x only a few months in use, like new (year of manufacture 2024) Both machines can be viewed by appointment in Bergeijk. Both machines have a 1-year warranty on the structure and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Connected load for the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, panjang total: 2.210 mm, lebar total: 1.530 mm, tinggi total: 1.940 mm, berat keseluruhan: 1.200 kg, tegangan masuk: 400 V, tinggi benda kerja (maks.): 50 mm, daya: 6 kW (8,16 hp), arus masuk: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges from both the outer and inner contours of stainless steel, steel, or aluminum parts that have been cut on a laser, shear, or punching machine. This machine processes parts of various dimensions, including products from a size of 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, leaving clean, smooth, and burr-free edges on all parts. Ksdpfx Aastzfntshjfa DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Current consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Tahun pembuatan: 2002, Kondisi: bekas, EN20240616_001_TIMESAVERS_GRINDER Kedpfx Aast Hw Shshjfa

Kondisi: bekas, Tahun pembuatan: 2016, Machine operating hours: 5320 h Maximum pass-through width: 300 mm Processable sheet thickness: 1–15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Infinitely variable feed rate: 0–2 m/min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard equipment: - Equipped with vacuum table for processing steel, stainless steel, and aluminium parts in sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming flipping and reworking of parts is eliminated - By folding away the innovative turning station, even parts with an edge length over 200 mm can be processed on one side - High level of automation enables economical and reliable processing even for large quantities Kjdpov N I Hlsfx Aahefa - High and consistent processing quality - Dry processing (no chemical additives required as with vibratory finishing) - Small parts are discharged on the loading side and collected in a catch box - No additional walking distances for the operator - Energy-efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and easy tool change - Simple and intuitive machine operation - Modern, compact machine design Additional equipment: Lissmac DDE 1500 extraction unit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, We offer you: Deburring machine Manufacturer: Viet Model: SV3-4.3 RVXR Kfsdpfx Aov Hxrgjahja Year of manufacture: 2020 Technical data and features: - Abrasive belt change on the left machine side - Tool set - Digital thickness indicator - Material feed at the infeed too strong - Electropneumatic control of the oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on or off - Machine with head adjustment (fixed working height 900 mm) - Lift system on 4 columns (spindle drive) with chain drive - Table extension at front and rear with one roller each - Industry 4.0 (LAN) package with LAN network connection - Working width: 1,350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height: 160 mm - Internal LED lighting - Electronic belt control for the longitudinal units - Calibration-grinding unit with sanding roller diameter 190 mm, belt length 2,620 mm - Electromechanical grit setting - The speed of the abrasive belt can be set via frequency converter - V-Spin unit with 15-disc grinding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row, counter-rotating. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removal of slag or oxides. - 16 support discs for V-Spin units, 80 mm diameter Scotchbrite + abrasive grain size 80 - 16 support discs for V-Spin unit, 80 mm diameter Tampico + abrasive grain size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads; each head is fitted with 3 pads for rotating sanding brushes, diameter 123 mm - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5–7 m/min Conveyor belt made of HYPALON rubber, heat and oil resistant, hardness 60 Shore, with smooth surface - Belt cleaning blower for the conveyor carpet incl. extraction - IPC MONITOR 15" touch screen control for machine operation, up to max. 10 processing units The control system manages the following processes: - Start sequence of selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness controller - Acoustic and visual signals when the machine starts up - Operating hours counter - Automatic control of feed speed according to machining performance (expressed in sqm). This allows for longer abrasive belt life based on the statistics. The machine is in very good condition and comes with 2 Euro pallets of new abrasive belts. Accessories, depicted tools and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and details as well as prior sale are subject to change and error!

Kondisi: baru, Tahun pembuatan: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Hanging rod for parts * Convection (uniform temperatures throughout the oven) * Safety locks for secure opening and closing * Maximum operating temperature: 230 °C TQ0906 Powder Coating Booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3200 m³/h * Hermetically sealed lamp: 1 piece * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc Kfodpjfgnytofx Aahoa * Powder collection container Oven and booth in stock, ready for dispatch. CHOOSE BUMEX SP. Z O.O. - Very high quality of the machines offered on the market. - Professional advice and service. - Warranty. - Warranty and post-warranty service. - Complete technical documentation. - 100% customer satisfaction. - All BUMEX SP. Z O.O. products have a WE Certificate. We offer our own transport – prices are arranged individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions. Please do not hesitate to contact us.

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Kfodpfx Aaod Hintshoa Technical Data – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 31.486 h, Format menengah Jam operasional: 31.486 jam Ksdpfxsxl R I Tj Aahofa Harga berdasarkan permintaan