Generator

Volvo FOGO FDG500VS

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface finishing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the media. Ijdpfxsn Smbro Ab Ija Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing pipe (various types) The images are for reference only. Optional accessories are available at an additional cost.

Tahun pembuatan: 1992, Kondisi: bekas, Vollmer saw blade sharpening machine, model NS 700, year of manufacture 1992 Isdpfx Abjkmnyfe Iea

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 48 m/menit, pergeseran cepat sumbu Y: 48 m/menit, pergerakan cepat sumbu Z: 48 m/menit, model controller: Heidenhain TNC 640, tinggi total: 29.620 mm, panjang total: 32.000 mm, lebar total: 28.480 mm, beban meja: 200 kg, diameter meja putar: 380 mm, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 36 batang, Perlengkapan: dokumentasi / manual, konveyor serpihan, Victor 5-Axis Machining Centre VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. KinematicsOpt calibration tool and calibration sphere. Standard Options: - Coolant system with high-pressure coolant pump MTH4-40/4 and supply hoses - Full enclosure coolant protection cabin - Spindle oil cooler - Oil separator - Spiral chip conveyor - Rinse gun and air gun - Operating tools and manuals Iodsq Tafxepfx Ab Isa Additional Options: - Through-spindle air - Air conditioning unit in the control cabinet - Chip conveyor - 40 tools - 36 bar ICS (internal coolant supply) with Mahle duplex filter - Table wash - Workpiece measuring system TS460 - Automatic door - Interface - 8" 3-jaw chuck Images are for reference only and may vary. Available ex stock Bergneustadt (subject to prior sale).

Kondisi: baru, Tahun pembuatan: 2025, daya nominal: 2.000 kW (2.719,24 hp), 2 x Generator GAS - BARU Ijdexnlzyopfx Ab Iea Pabrikan - MTU (Jerman) Model - 20V4000 GS Tahun Pembuatan - 2025 Frekuensi - 50 Hz Tegangan - 400 V Daya - 2 MW Tersedia - 2 unit Silakan hubungi kami untuk informasi lebih lanjut. Terima kasih!

Tahun pembuatan: 2012, Kondisi: baik (bekas), The machine has a total spindle time of 5,600 hours. Datron D5 Dental Milling Machine, Year of manufacture: 2012, 5-axis simultaneous machining, Control: PC – Beckhoff, Iedpfswvqh Dsx Ab Ioa Automation / 8 blanks, Milling spindle: 1.8 kW, Spindle speed up to 50,000 rpm, Tool holder: HSK C25, 15-position tool changer, Rotary – swivel axis, A axis: +/- 25°, B axis: +/- 45°,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 88 kW (119,65 hp), kapasitas tangki bahan bakar: 399 l, warna: hijau, berat keseluruhan: 32.700 kg, Tahun pembuatan: 2019, jam operasional: 2.351 h, Sieving drive speed: 1130 to 950 rpm Transport dimensions: 15,300 x 2,900 x 3,400 mm (LxWxH) Lower deck screening area: 4,575 x 1,525 mm Screen box adjustment: 16° to 20° Design: Double-deck screening plant Upper deck screening area: 4,880 x 1,525 mm Diesel tank capacity: 399 litres Engine manufacturer / model / power: Cat / C4.4 / 88 kW Isdpjvzahlofx Ab Isa Conveyor belt width (mid-fraction / fine material belt): 900 mm Feeder belt width: 1,400 mm Weight: 32,700 kg Hydraulic oil capacity: 630 litres

Tahun pembuatan: 2010, jam operasional: 13.500 h, Kondisi: bekas, Purpose of use: Construction For further information, please contact Mohamad Fattah Ahmad. ABI TM 14/17 V Year of manufacture: 2010 CAT engine / 470 kW Ijdpfx Aoh Tyylob Ija Upper carriage: Sennebogen SR 35 T Auxiliary winch Vibrator MRZV 24VV Optional with pre-drilling drive Good condition!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 16 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 400 mm, rentang pengukuran sumbu Y: 400 mm, rentang pengukuran sumbu Z: 200 mm, masa garansi: 12 bulan, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 200 mm, tegangan masuk: 230 V, panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 200 mm, tahun perombakan terakhir: 2025, suhu lingkungan (min.): 16 °C, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pencahayaan, Mahr Multiscope 442 Multisensor measuring device equipped with camera, laser, and Renishaw touch probe system With warranty and acceptance certificate upon delivery +++INTEREST-FREE FINANCING WITHOUT BANK TRANSACTION AVAILABLE ON REQUEST+++ Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCL. latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery with factory service or forwarding agent, worldwide. Online or optionally on-site demonstrations with customer parts, application-specific consulting by accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, installation, commissioning, accuracy verification according to standards, certification, and comprehensive acceptance documentation. Individual training and instruction programs also available as online courses. Rental, hire-purchase, or financing directly via Profitech and without financial institution possible. Measuring device can be individually configured to customer requirements. Measuring range all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: approx. 800kg Max. load capacity: glass stage 30kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. travel speed: 250mm/s incl. camera incl. laser incl. LED ring light incl. new frame grabber (Eagle) incl. dual monitor operation incl. CNC control and PC incl. new software OptiCheck3D V5.0 (full version, no subscription model) Possible upgrades: Windows 11, 64-bit CNC control, extended accuracy, complete package including calibration and training. Iedpfjdy Uvmex Ab Ioa

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Translation: Travel X/Y/Z: 835mm/510mm/510mm, spindle speed: 12,000 rpm, spindle power: 14kW, table size X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool stations: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112,962h, spindle hours: 30,702h. Includes chip conveyor, internal coolant supply (IKZ), linear scale measuring system. Documentation available. Inspection on site is possible. Iodpfx Abov H Dgpj Ija

Kondisi: bekas, Tahun pembuatan: 2001, Technical specifications: Tool holder: SK 40 Travel paths: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. tool weight: 260 kg Spindle speed: 12,000 rpm Max. table load: 380 kg Weight, approx.: 6,500 kg Iedpfxjt Hr Ahe Ab Isa Dimensions (LxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)