CNC-fleksibel melalui-feed pusat bor

WEEKE (HOMAG Group) BHT 500 PROFILINE

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Dkedpfxot Hagne Adgog Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. Dsdod Hz Niopfx Adgskg BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm • X-axis support: 3000 mm • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kondisi sangat baik: ruang pengering kompak MÜHLBÖCK Tipe QLSF-2x1,2-3x1,2-13 / Tahun pembuatan 2004. Sistem lengkap termasuk kontrol. Kebutuhan panas 330 kW. Instalasi masih beroperasi! Transportasi lengkap menggunakan truk memungkinkan. Hanya counterweight yang harus dibongkar. Jika diperlukan, sistem pemanas yang sesuai juga dapat disediakan. Pembongkaran/transportasi dapat dilakukan sendiri. Ukuran bangunan lihat gambar terlampir. Dsdsxt Hwaspfx Adgskg

Kondisi: bekas, Mesin Press Pelet Produsen: Bühler Model: RPWPR 900.138 EX 4 press – Bühler 3-4 ton/jam 4 mixer 4 screw conveyor pengumpan Konveyor rantai stainless steel 20 m Konveyor output 16 m Dedjw Iy T Sopfx Adgskg Soft starter

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW Dkjdpjrmucxjfx Adgsg - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas),

Kondisi: bekas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx: 2500 kg Weinig Profimat 23 four-sided planer, window version with glass bead cutting, or can be used as a grooving spindle ATS control and program control --- Machine is currently being overhauled and function-tested Technical data summary (For any additionally included accessories, please enquire) --- General --- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx: 2500 kg Spindle configuration --- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically controlled up/down Spindle specifications --- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features --- > Glass bead separation or can be used as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package - Shared control of the right spindle and glass bead removal via manual selector switch on the control panel Dodsu Su Hujpfx Adgjkg > Spindles with mechanical digital readout Option: Used planing heads (Technical data according to manufacturer - no liability assumed!)

Kondisi: baru, Tahun pembuatan: 2023, Orbital sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thickness for chairs, tables, beds, and related items. The main features of the machine are: frame made of electro-welded steel; rotating disc with 2 counter-rotating sanding belts driven by an electric motor, with a rotating movement around the workpiece; electrical control panel; 2 adjustable worktables (infeed – outfeed); option for mounting 2 automatic workpiece feed units with variable speed via frequency inverter. Sanding belts: 80 x 1260 mm Min./max. workpiece diameter: 10-100 mm (Ø) Min. curvature radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Dkedpfsqnufvox Adgjg Camam, Comec, OMEF, Brusa di Garboli

Kondisi: sangat baik (bekas), Lini pengupasan Cambio, diameter maksimum pengupasan 450 mm, konveyor pengumpan melintang dengan panjang 12,5 m Dkjdpfjwvhkvox Adgjg

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Dkjdpfxjhw Ng Ie Adgsg Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Pneumatic side clamping device