Pusat mesin

WEEKE PROFI BHC912/43/25

Kondisi: bekas, nomor mesin/kendaraan: 005947, Working area X-axis: 2500 mm Bedpfxjx Idw Ao Aahsct Working area Y-axis: 4300 mm Main spindle power: 12 kW Number of controlled axes: 4 axes Number of tool holders: 28

Kondisi: baru, Tahun pembuatan: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW (both with variable speed drive, stepless adjustment) Feed motor power: 0.37 kW Bcedpfji Hpk Uex Aahjt Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Kondisi: bekas, Tahun pembuatan: 2004, Instalasi finger joint setengah otomatis yang ringkas terdiri dari: - Mesin frais PJ 150/500 - Meja transfer untuk penyerahan manual - Press satu kanal PJ 7/6100 li Mesin frais: 2 paket/menit Press: 2 siklus/menit Panjang masuk: 150 – 700 mm Bcsdow Nbacopfx Aahet Panjang akhir: maks. 6.100 mm

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 94323, jarak pergerakan sumbu X: 3.060 mm, jarak lintasan sumbu Y: 1.260 mm, jarak gerak sumbu Z: 150 mm, tinggi total: 2.400 mm, panjang total: 4.400 mm, lebar total: 2.800 mm, berat keseluruhan: 3.130 kg, FOR SALE: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Fully operational, available for inspection in Wadowice Bcsdpfjwpthtex Aahjt Travel X: 3060 mm Travel Y: 1260 mm Travel Z: 150 mm Control type: CNC XP 600

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, We offer you: Deburring machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical data and features: - Abrasive belt change on the left machine side - Tool set - Digital thickness indicator - Material feed at the infeed too strong - Electropneumatic control of the oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatics - Pneumatic lifting and lowering when switching the units on or off - Machine with head adjustment (fixed working height 900 mm) - Lift system on 4 columns (spindle drive) with chain drive - Table extension at front and rear with one roller each - Industry 4.0 (LAN) package with LAN network connection - Working width: 1,350 mm - Machine with movable head - Centesimal lifting system with inverter - Useful working height: 160 mm - Internal LED lighting - Electronic belt control for the longitudinal units Bcodsv Hxrgopfx Aahjt - Calibration-grinding unit with sanding roller diameter 190 mm, belt length 2,620 mm - Electromechanical grit setting - The speed of the abrasive belt can be set via frequency converter - V-Spin unit with 15-disc grinding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row, counter-rotating. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removal of slag or oxides. - 16 support discs for V-Spin units, 80 mm diameter Scotchbrite + abrasive grain size 80 - 16 support discs for V-Spin unit, 80 mm diameter Tampico + abrasive grain size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads; each head is fitted with 3 pads for rotating sanding brushes, diameter 123 mm - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5–7 m/min Conveyor belt made of HYPALON rubber, heat and oil resistant, hardness 60 Shore, with smooth surface - Belt cleaning blower for the conveyor carpet incl. extraction - IPC MONITOR 15" touch screen control for machine operation, up to max. 10 processing units The control system manages the following processes: - Start sequence of selected drive motors - Storage of 1,000 processing programs - Automatic positioning of the working thickness controller - Acoustic and visual signals when the machine starts up - Operating hours counter - Automatic control of feed speed according to machining performance (expressed in sqm). This allows for longer abrasive belt life based on the statistics. The machine is in very good condition and comes with 2 Euro pallets of new abrasive belts. Accessories, depicted tools and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and details as well as prior sale are subject to change and error!

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Bcodpfjw Sy T Hex Aahot Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: baru, Tahun pembuatan: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material thickness: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers, suitable for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives for various types of materials such as MDF, multiplex, particle board, composites, and gypsum plasterboard. This type of gluing machine enables precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be appropriate for the type of production. The heavy-duty frame and core of the rollers, manufactured with greater wall thickness compared to earlier models, allow for high production throughput without any particular problems and enable bonding of materials up to 2,200 mm in width. Roller removal for maintenance is a simple process, as the supports can be separated into two halves using a simple bayonet coupling. The gluing machine can also be equipped with various optional features such as an electronic speed controller, automatic roller washing system, and automatic upper roller lift with position indicator on the display. The S4R/P glue machine is used for a variety of manufacturing applications, including in the construction sector and for the production of foam panels and mattresses. Equipment: Bcedpeu I R Utefx Aahot - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm. Disc rollers D: 122 mm, stainless steel Location: ex stock 54634 Bitburg - immediately available -

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1993, nomor mesin/kendaraan: 624/9, gaya penekanan: 10 t, tinggi kerja: 805 mm, panjang total: 1.900 mm, Mesin press taktis untuk sambungan jari ekor burung Mesin press sambungan jari ekor burung Gaya tekan 10 t Bcodpfxot Sc T Io Aahet Lebar kayu 80-300 mm Tebal kayu 18 - 80 mm OPSIONAL dengan unit hidrolik

Kondisi: perlu perbaikan (bekas), Instalasi sambungan jari dimter HK 400 Bcjdpfjvi Hw Njx Aahst Instalasi finger joint untuk paket kayu Panjang kayu yang dapat diolah: 800-6000 mm Tinggi pahat: 285 mm (300 mm) Warna: biru Perlu diperbaiki, dijual dalam kondisi saat ini Instalasi sudah dibongkar dan tersimpan di gudang di Achern Banyak material dengan harga murah Semua dokumen teknis tersedia Kami juga memberikan bantuan teknis dan menjawab semua pertanyaan Anda

Tahun pembuatan: 1990, Kondisi: baik (bekas), I'm selling a door manufacturing machine MAKA Year of manufacture: 1990 Combined oscillating slot drilling and drilling machine. Available for immediate sale. Bodpjgiwl Defx Aahect