Mesin pengasah

WEINIG OptiControl 970 PowerLock

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change Njdpfx Abjvu Hgbjvekw - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: sangat baik (bekas), SICAR Forte 400 thickness planer Njdpst Rp Hxjfx Abvskw - Working width: 400 mm - Planing height: 300 mm - Cutterblock with traditional knives - 4-knife cutterblock - Cutterblock speed: 5200 rpm - Electrically adjustable table height (up/down) - Main motor power: 3 kW - 3 feed speeds - CE certificate

Kondisi: sangat baik (bekas), HM saw tooth flank grinding machine with double grinding wheel GRIFO Nkjdpfxshakils Abvew

Kondisi: bekas, Antique thread sewing machine / Antique sewing machine Gebr. Brehmer 39 Serial No. 2742 Beautifully crafted antique thread sewing machine Nsdpfewtw Dgsx Abvjkw Online video inspection possible via WhatsApp, MS Zoom, or Telegram Located in Emskirchen/Nuremberg – Immediately available – Machine can be tested on site

Kondisi: baik (bekas), 0401 Marke: PERFECTA Modell: 550/S Schärfmaschine für Sägebänder Technische Daten: - Mit Untergestell - Schleifscheibendurchmesser: 140 mm - Motor: 0,5 PS, Drehstrom - Einstellvorrichtung - Abmessungen: 600 x 550 x 1400 mm (Höhe) - Gewicht: 120 kg Nodpfxeuq Hhte Abvjkw

Kondisi: bekas, Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. Njdpfxjt Tqy Ej Abvokw The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Nkjdpfxswgwmno Abvjw Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Nkedpox Nqqxjfx Abvjw Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander A wide-belt sander from Löwer is integrated into the production line. The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Kondisi: bekas, Tahun pembuatan: 2009, lebar total: 1.800 mm, tinggi total: 1.650 mm, Empty weight: 2,400 kg Dimensions (L x W x H): 350 x 180 x 165 cm Motor Configuration: Bottom, 5.5 kW Right, 5.5 kW Left, 5.5 kW Top, 7.5 kW Bottom, no motor, but optional spindle - Year of manufacture: 2009 - Documentation available: Yes - CE certificate available: No - Serial number: AA2/001125 - Number of spindles [pcs]: 4 - Spindle 1: - Spindle diameter [mm]: 40 - Spindle 2: - Spindle diameter [mm]: 40 - Spindle 3: - Spindle diameter [mm]: 40 - Spindle 4: - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 Nsdpfx Aswnh Irobvekw - Max. planing height [mm]: 120 - Infeed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Extraction port diameter [mm]: 120 - Voltage [V]: 400 - Power consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs]: 1 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for business customers Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Kondisi: sangat baik (bekas), Double-sided grinding machine for carbide-tipped saw blades VOLLMER model CEF250 Nodjukgw Ujpfx Abvokw