Mesin optimalisasi panjang

WEINIG OPTICUT150

Kondisi: baru, Tahun pembuatan: 2026, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Worktable inclined at 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power: 10 HP (7.5 kW), 400 V/50 Hz TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for a bundle weight of up to 80 kg Maximum speed of the push-feed system: 90 m/min Pneumatic lift of the pusher at the end of the cutting cycle and overhead return. Data entry management: 12-inch TOUCH SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Gbedpfxohw Ng Ij Abhsh Loading and saving machine parameters via USB port Edit and enter cutting cycles (patterns) directly on the controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual entry of bundle length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board sequence) 1000 cutting lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect removal (OPTION NOT INSTALLED ON THIS MACHINE) Technical description: "OPTI PLUS" package: for the removal of knots and defects Photocell for reading knots and defects for wood mapping Marking with fluorescent chalks/crayons (Note: Only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on PC in XML format

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Gbodpfxjvu Hfqe Abheh Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: bekas, Tahun pembuatan: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic identification and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Gedpfswtgcxox Abhjbh Year of manufacture: 2001 Order number: 0682-10 Supply voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Protection: 25 A Condition: used

Kondisi: bekas, Total tinggi 6500 mm, luas dasar 2000 x 2000 mm, instalasi luar ruangan. Seri filter kompak model PKFP – 1 elemen – 1,92 x 1,92. Filter jenis rattle, pengoperasian tekanan lebih. Panjang selang filter 2500 mm, diameter 180 mm – sehingga total luas penyaring 105 m2. 2 kipas udara mentah – 2 pipa (diameter 300 mm): 1 x kipas KT 300, daya 15 kW, kapasitas 6361 m³/jam, tahun 1999; 1 x kipas S 25/300, daya 7,5 kW, kapasitas 7400 m³/jam, tahun 1993; 1 x kipas transportasi, 6,1 kW, kapasitas 57 m³/menit, tahun 1996. Total volume aliran sekitar 14.000 m³/jam. Mesin press briket Höcker Polytechnik tipe BrikStar C 3 - 12 . 1225, motor 3,0 kW, diameter briket 65 mm bulat, kapasitas kira-kira 40–45 kg/jam tergantung berat jenis material. Lokasi penyimpanan: Nattheim. Gjdpfjvviytox Abhebh

Kondisi: sangat baik (bekas), Brookhuis moisture meter for transverse (crosswise) operation with 3 sensors Gbodpfjhlcu Nox Abhsh

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 450 mm, ketinggian potong (maks.): 100 mm, lebar pemotongan (maks.): 245 mm, tinggi kerja: 100 mm, jenis arus masuk: tiga fasa, – year of manufacture: 2001 – optimization – cross-cutting – the machine is equipped with additional tables, allowing a maximum cutting length of up to 6500 mm (currently set to 3400 mm) – 8 cutting lists Gedpfx Abjwtzrhehebh TECHNICAL PARAMETERS: – max. cutting length: 6500 mm (currently 3400 mm) – min. element length: 300 mm – max. cutting height: 100 mm – max. cutting width: 245 mm – blade diameter: 450 mm – motor power: 9 kW – max. feed speed: 120 m/min – acceleration: 10 m/s2 – optimization by length and value – pneumatic material clamp – five ejectors – intelligently controlled waste chute – Vario speed system – total length: 17,500 mm – transport dimensions (L/W/H): 800 / 245 / 220 cm – weight: 3,500 kg

Tahun pembuatan: 2003, Kondisi: baik (bekas), nomor mesin/kendaraan: 02070325, Automatic dowel boring machine 2 horizontal boring units from the ends 3 vertical boring units from the top Lateral displacement of vertical boring units from above Vertical magazine Return conveyor to operator Gjdpfx Ajkn Ibuobhebh

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 810 mm, lebar meja: 975 mm, MESIN GERGJI PITA REFENDERE MEBER MOD. SR900 Gjdpfox Rt Aaox Abhsbh - Ukuran meja 975x810 mm - Motor 11 kW - Tahun 2000 (CE) - LENGKAP DENGAN MANUAL

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 15 kW (20,39 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 160 mm, lebar pemotongan (maks.): 450 mm, diameter mata gergaji: 550 mm, jenis penyesuaian ketinggian: mekanis, panjang total: 8.100 mm, berat keseluruhan: 2.700 kg, panjang pemotongan (maks.): 6.200 mm, sambungan udara terkompresi: 6 batang, diameter nosel ekstraksi: 160 mm, diameter lubang cakram: 80 mm, lebar meja: 450 mm, masa garansi: 12 bulan, tinggi kerja: 850 mm, The base model of the FLS technology is the FLS ECO 120 rip saw. This saw is primarily used in small and medium-sized operations focused on various wood processing tasks, and is also suitable for non-wood materials. The single-blade FLS ECO 120 saw significantly increases work efficiency and material yield (by 10-15%) and can process cants, planks, beams, as well as large-format materials. Input materials can be trimmed, ripped, cut to size, or used to produce slats and lamellas. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by a single worker. The machine meets stringent occupational safety requirements in accordance with relevant EC regulations and directives. Stepless feed and blade lift adjustment ensures clean cuts and high cutting performance. Blade replacement is easy and, most importantly, safe thanks to the "ProLock" quick-release system. The saw carriage is fitted with guide and side rollers, providing optimal guidance of the floating unit with minimal vibration during operation. The upper hold-down and adjustable wooden stop ensure secure material clamping throughout the cut, preventing any unwanted movement. Gbjdpfeubbubox Abhoh FLS technology is unique for its quick and simple setting, featuring ergonomically positioned controls with a touchscreen panel. Cutting width values can be entered manually or via the standard Absolute program, or optional Chain and Optim programs. The planned cutting line is shown on the material by a laser beam, followed by longitudinal movement of the sliding saw blade. The FLS saw is suitable for cutting cants, beams, planks, and large-format materials. Input material can be edge trimmed, ripped, cut to size, beveled, mitered, grooved, or used to produce slats and lamellas. Ideal for manufacturers of edge-glued panels, solid furniture, or staircases. The machine can also be used for cutting non-wood materials, such as PUR/PIR panels, plastic materials, sandwich panels, aluminum or cement-bonded boards.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weinig Powermat 500 Four-Sided Planer Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle arrangement: - Bottom: 5.5 kW, 8000 rpm - Right: 5.5 kW, 8000 rpm - Left: 7.5 kW, 8000 rpm - Top: 7.5 kW, 8000 rpm Gedpjvfr Rgsfx Abhobh - Bottom: 7.5 kW, 8000 rpm - Universal: 5.5 kW, 8000 rpm Spindle no. 6 equipped with PowerLock system Feed speed adjustable via frequency inverter, up to 30 m/min Feed rollers integrated in the worktable (1 ribbed roller for wet wood) Electro-motorised adjustment of working height and width Pneumatic material hold-downs Cardan shaft drive Total power: 41 kW Year of manufacture: 2005 CE certified