Salin router

WINTER COPYMAX 1000

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material Gsdpsw A Ruqefx Ahmoui OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 170 mm, MESIN BUBUT PENIRU BACCI MOD. T4MO - Diameter kerja maksimum: 170 mm - Panjang kerja maksimum: 1000 mm - 4 spindel (2 kanan & 2 kiri) Guodpfsx Rw Iyjx Ahmsi - Unit pengamplas longitudinal - Cawan berdiameter 35 mm - Tahun: 1994

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 170 mm, panjang pembubutan: 1.250 mm, jumlah spindel: 4, Perlengkapan: kabin, Mesin Bubut Penyalin BACCI MOD. T4MO - Diameter kerja maksimum: 170 mm - Panjang kerja maksimum: 1250 mm - Jumlah spindle: 4 - Grup penghalus longitudinal - Diameter kerja maksimum: 170 mm - Kabin peredam suara & sistem ekstraksi debu Gsdox Rx D Njpfx Ahmsui - Daya standar motor frais: 11 kW - Tahun pembuatan: 2000

Kondisi: bekas, Tahun pembuatan: 2014, de2hu Gjdpfx Aoxw Ty Nohmoui

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 Guodpfx Ahstixpuemji No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system