Mesin pengikat tepi

WINTER KANTOMAX BASIC FÜ+EK

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H) 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 - 2 mm - Min. / max. edge height: 15 - 55 mm - Min. / max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) at the machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot, Teflon coated, for hot melt adhesive granulate, capacity 3 kg - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Pre-milling unit with 2 HW pre-milling cutterheads for jointing before glue application, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors, each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel pre-warming - Pre-cutting from the roll - 3 solid steel pressure rollers - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for trimming flush and rounding off PVC edges, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, angle and height adjustable - Spray nozzle system (cleaning liquid) - Total power consumption: 8.0 kW / 400 V - Extraction nozzles: 4 x Ø 100 mm Duodpfsvz E Tmsx Adgel - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Overall dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Kondisi: sangat baik (bekas), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (60 Sh roller, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extensions with 2 rollers, front and rear Dodpexqggcofx Adgeul Sanding shoe inserts lined with new graphite cloth Including as-new sanding belts Incl. all documentation Note on used machinery: • Subject to errors in technical specifications and prior sale. • Quoted prices are ex-location – loaded free of charge! • The machines have been cleaned and functionality tested. • All machines are sold as inspected, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines on-site. • Special agreements are only valid if made in writing. (We only respond to inquiries stating your address and telephone number!)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Duedpfogf Sw Nex Adgsl Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: bekas, Tahun pembuatan: 2001, Lebar pelat pantul: 4000 mm Tinggi pelat pantul: 1000 mm Dimensi luar: 4600 x 1500 mm 2 x 1,5 kW motor Aliran volum nominal total: 7000 m³/jam Konektor ekstraksi kanan dan kiri dengan diameter 300 mm Lokasi penyimpanan: Garbsen Duedpfx Asvvizksdgol

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW Duodpfswka S Ijx Adgjl - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2016, Mesin bekas Tahun pembuatan: 2016 Kondisi: Saat ini masih dalam produksi Duedpfsw Rtadjx Adgjl Perlengkapan dan data teknis: Bak lem Zona penekan Gergaji pemotong Frais kombi r=2 mm, frais rata Ketebalan benda kerja: 8 - 50 mm Lebar benda kerja minimal: ca. 75 mm Panjang benda kerja minimal: ca. 120 mm Ketebalan tepi: 0,4 - 3,0/5,0 mm Tinggi tepi maks. = tinggi benda kerja + 4 mm (2+2) Koneksi listrik: 400V, 50 Hz, 3Ph Daya total: 3,2 kW Kecepatan makan: 8,0 m/menit Koneksi pneumatik: 6 bar Berat bersih: 550 kg Mesin dapat ditingkatkan dengan: Pisau radius Pisau permukaan Unit pemoles Lokasi: NRW Ketersediaan: Sekitar Desember 2025

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Brandt KDF 110 Optimat Ambition – only 1,150 operating hours Manufacturer: Brandt Model: KDF 110 Year of Manufacture: 2012 Machine No.: 0-261-20-6960 Control: Easy Control 10+ Contactless track control, feed-rate regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: - Chain Feed Track: Standard equipment with central lubrication for transport chain - Upper Pressure Rollers/Product Guide: Central control, 2 roller tracks - Jointing Unit: 2 x 0.75 kW, 200 Hz; includes DIA jointing cutter set, manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness - Gluing Unit: A3 gluing unit for hotmelt glue, with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control - Pressure Zone: 1 powered roller and 2 idle rollers for optimal and consistent compaction - End Trimming Unit: 0.18 kW, 12,000 rpm - Milling Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, 3-position adjustment for chamfer/radius (R2), overlap, and straight; max. 3 mm edge thickness with Siko counter - Profile Scraper: Max. 3 mm edge thickness - Surface Scraper: Reversible knives Duedexvirfjpfx Adgel Chain width: 80 mm Edgebanding material (roll): 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Min. workpiece width: 70 mm for 8-22 mm thickness; 120 mm for 23-40 mm thickness (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baik (bekas), Tahun pembuatan: 2006, • Glue pot Duedpeibdyqefx Adgel • Conversion: carried out by Hüttenhölscher GmbH in Verl • Application area: adhesive application unit for handle rails • Vacuum table: included • Automatic pressure zone: included

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 4.200 mm, panjang umpan sumbu Y: 1.600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Dikondisikan untuk 1 spindle utama dengan unit pengeleman, terpasang di sisi kanan balok portal. Spindle utama 5 sumbu, 12 kW Kepala bor dengan 31 spindle: 21 vertikal dan 10 horizontal Pisau alur dapat dimiringkan 90° Nozel peniup tepi 60 mm Magasin alat putar untuk 32 alat, HSKF63 Rak alat linier untuk 8 posisi Rak alat putar untuk 10 posisi Unit pengeleman Power Edge Pro Duo Kontrol pengaman dengan Bumper Dusdpfx Aox Irzcodgjl Konveyor serpihan Pompa vakum Perangkat lunak kontrol PowerTouch, WoodWop

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Mesin pelapis tepi - unit pra-milling - unit lem panas - unit pemotongan Duodpfx Adox Rcw Hjgjl - unit milling - unit pengikis - unit pengikis lem