Mesin pengikat tepi

WINTER KANTOMAX BASIC

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H) 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 - 2 mm - Min. / max. edge height: 15 - 55 mm - Min. / max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) at the machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot, Teflon coated, for hot melt adhesive granulate, capacity 3 kg - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Pre-milling unit with 2 HW pre-milling cutterheads for jointing before glue application, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors, each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel pre-warming - Pre-cutting from the roll - 3 solid steel pressure rollers - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm Duedpovz E Tmefx Aaqjt - Contour trimming unit (corner rounding) top and bottom, for trimming flush and rounding off PVC edges, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, angle and height adjustable - Spray nozzle system (cleaning liquid) - Total power consumption: 8.0 kW / 400 V - Extraction nozzles: 4 x Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Overall dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Kondisi: bekas, Tahun pembuatan: 2001, Lebar pelat pantul: 4000 mm Tinggi pelat pantul: 1000 mm Dimensi luar: 4600 x 1500 mm 2 x 1,5 kW motor Aliran volum nominal total: 7000 m³/jam Konektor ekstraksi kanan dan kiri dengan diameter 300 mm Lokasi penyimpanan: Garbsen Duodpfx Asvvizkeaqst

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3810 x 575 x 1520 mm Weight: 1000 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ+EK - Minimum / Maximum Edge Thickness: 0.4 - 2 mm - Minimum / Maximum Edge Height: 15 - 48 mm - Minimum / Maximum Workpiece Height: 10 - 45 mm - Minimum Workpiece Width: 80 mm - Minimum Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Speed: 8, 12, 16 m/min - Operator panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edgebanding materials - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compaction - Centrally adjustable top pressure - Teflon-coated glue pot for hot melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA jointing cutter heads for pre-milling prior to gluing, spindle adjustment vertical, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one with, one against feed direction) - End trimming saw unit for front and rear edge overhangs, high-precision linear guides, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Top and bottom flush/radius trimming unit with vertical and horizontal sensors, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm Dedpfx Aevz E Scjaqsut - Corner rounding unit (profile trimming) top and bottom, for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with top, bottom and side sensing for rounding pre-milled PVC edges - Buffing unit for final edge finishing on top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, adjustable tilt and height - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound enclosure with inspection window - Compressed air connection: 6 bar - Overall dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3200 x 780 x 1500 mm Weight: 800 kg Total power requirement: 8 kW Dedpfx Asvz E Evsaqout Edge banding machine KANTOMAX BASIC FÜ - Min. / max. edge thickness: 0.4 - 3 mm - Min. / max. edge height: 15 - 48 mm - Min. / max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edging material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA (diamond-tipped) jointing cutter heads for pre-joining before gluing, spindle adjustment vertical, electro-pneumatic control horizontal, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 x clockwise, 1 x counterclockwise) - End trimming saw unit for front and rear edge overhang. High precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit to improve edge grip, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, tiltable and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction nozzle Ø 100 mm - Extendable workpiece support - Sound enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel Dsdpfx Ajgf Sw Neaqsut - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Mesin pelapis pinggir Tempora F 60.06 - Tahun pembuatan: 2018 Dodpfxox Ha I Us Aaqjut - Wadah lem yang dapat diganti - Unit untuk pra-frezer, pemotong ujung, gergaji presisi, pemotong, pisau penarik radius, pisau penarik datar, pemoles - Dengan aplikasi cairan pemisah dan cairan pembersih - Perangkat penyemprot - Ketebalan tepi: 0,4-6 mm - Panjang penempatan: 3.220 mm - Pemotongan dengan gergaji Transportasi dapat diatur dengan biaya tambahan!

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, en-001 Dusdowwtz Nepfx Aaqot

Kondisi: baru, Tahun pembuatan: 2026, The radial turbine is located in the vacuum cabin, on the clean air side, within specialized sound-absorbing enclosures. The new generation reinforced turbine and the large filtration area ensure increased efficiency and performance, while also contributing to reduced electrical energy consumption. Advantages - The DCV 7500 extraction unit represents another milestone in the production of efficient chip and dust extraction systems, aimed at consistently maintaining the same extraction parameters throughout the entire operating cycle. - Durable, heavy-duty construction guarantees quiet and vibration-free operation of the extractor. - Proven reliability, as confirmed by manufacturing plants handling large orders daily. - Compact footprint, yet capable of extracting large volumes of dust and chips. - Large-diameter (280 mm) metal suction nozzle ensures optimal airflow. - Powerful, quiet fan provides high vacuum performance! Dsdpfovzqtxox Aaqeut - Special blade design makes the unit more efficient and contributes to energy savings. - Exceptional tightness across the entire suction system ensures top air quality inside the facility and prevents heat loss during the heating season. - Large filter surface. - Possibility of ceiling-mounted ducting to connect multiple machines working simultaneously with the DCV 7500E extraction system. - Quick replacement of waste collection bags, designed to maintain 99.99% system hermeticity. - Low noise and high efficiency ensured by a balanced metal impeller. - Maintains workplace cleanliness and tidiness, directly impacting your product quality. - Compatible with machines such as grinders, edge banders, panel saws, etc. - We guarantee high purification quality!!! - Polyester filter captures dust particles down to 5 microns. For filtration of smaller particles, a filter such as HEPA is required. - The use of this extractor in explosive environments is prohibited. - Designed for woodworking industry operations with chips, shavings, and dust (not suitable for wet materials such as wet sawdust). Technical specifications CONTINUOUS DUTY MOTOR POWER S1: 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 7500 m³/h SUCTION NOZZLE DIAMETER: 280 mm SUCTION SPEED: 28-32 m/s FILTER AREA: 18 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 35 DIMENSIONS: 1040 x 625 x 2150 mm WEIGHT: 306 kg Manufacturer: Cormak

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The FM 230N extraction fan is a professional solution designed for local extraction of sawdust, wood chips, and dust generated during woodworking operations. Its compact design, robust motor, and high efficiency make this chip blower an ideal element of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages: - Efficient sawdust extraction – extraction capacity of 1,000 m³/h ensures effective removal of contaminants from the working area - 0.75 kW motor – delivers sufficient torque with low energy consumption - High impeller speed – 2,950 rpm guarantees intensive airflow - 100 mm inlet diameter – facilitates connection to common woodworking machines and installations - Low weight (14 kg) – easy to transport and install at various workstations Design and Technology: The FM 230N fan features a fully enclosed, welded steel construction with the impeller mounted directly onto the motor shaft. This design eliminates power losses due to belt transmission and minimizes vibration. The housing is optimized for airflow, providing stable operation even during continuous use. The electric motor is powered by a 230V supply at a standard frequency of 50 Hz, making it universally compatible with most workshops without the need for three-phase power installation. Precision and Operating Efficiency: The FM 230N is engineered for high-efficiency transport of air containing light wood fractions. Thanks to the optimized impeller and airflow duct, the unit minimizes air resistance, allowing uninterrupted operation when handling large volumes of chips and sawdust. It serves perfectly both as a chip extraction fan and a local blower to support woodworking machines. Applications: FM 230N is used in carpentry workshops, furniture factories, and production facilities with machines generating wood dust. It can operate independently or as part of a larger dust extraction system. It is especially recommended for extracting chips from machines such as: - Planers and jointers - Thicknessers - Spindle moulders - Edge banders - Circular saws Standard Equipment: - Powder-coated steel housing - 100 mm inlet port - Sturdy mounting base - 230V single-phase motor Optional Equipment: - 100 mm diameter flexible hoses - Dust extraction bags Technical Specifications: Dsdpfxjvu Ad Aj Aaqsut Motor power: 0.75 kW Speed: 2,950 rpm Extraction capacity: 1,000 m³/h Inlet diameter: 100 mm Outlet diameter: 110 mm Voltage / Frequency: 230 V / 50 Hz Dimensions (L x W x H): 430 x 400 x 340 mm Weight: 15 kg

Kondisi: baru, Tahun pembuatan: 2025, maße-länge-breite-höhe-2100x920x2250-mm-gewicht-410-kg-gesamtlei stungsbedarf-5-5-kw-entstauber-entspricht-h2-norm-cleaner-5000 Duodpfx Aaovz Erijqst