Sander sabuk lebar

WINTER SANDOMAT RP-630 SHORT DELUXE

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left Pjdou Agh Sopfx Abwogn 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Max. throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame stand, level valve, inspection shaft, and documentation. Pgjdpfx Abeh Akm Tjwjn

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, penyesuaian silinder hidrolik: 40 mm, tinggi pemasangan: 2.400 mm, lebar total: 17.000 mm, panjang meja: 400 mm, lebar meja: 400 mm, gaya penekanan: 25 t, penyesuaian langkah: 17 mm, lebar kerja: 200 mm, berat keseluruhan: 2.500 kg, tahun perombakan terakhir: 2023, daya: 0,003 kW (0,00 hp), Manufacturer: MABU Model: 25 VPR. Made in Germany. Pedpfxoq Ikhps Abwsgn Completely overhauled in December 2023. Max. force: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand starter and foot pedal starter. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Power: 3 kW. Voltage: 230 / 400 V. Air connection: 5.5 bar. Feed: Silicon SFS 200 on the left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu PF 1.3 control system. Front and rear safety guards with viewing windows. Technical documentation and operating manual in English and German included. CE certificate and EUR-1 certificate of origin. In stock, tested, and ready for dispatch. Further used machines from Mabu, Bruderer, Bihler, and Schaal available for sale from our inventory.

Kondisi: baru, Tahun pembuatan: 2025, panjang meja: 900 mm, lebar meja: 450 mm, jumlah spindel: 1, kecepatan spindel (min.): 8.000 rpm, beban meja: 500 kg, de Pedpfsxc I Dgjx Abwegn

Kondisi: belum diuji (bekas), Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units Pjdpfx Abst Tqy Eswegn - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: baik (bekas), Tahun pembuatan: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table through-hole: 100 mm Ram surface: 120 x 100 mm Installation height: 250 mm Total power requirement: 1.1 kW Machine weight approx.: 1,150 kg Space requirement approx.: 0.96 x 1.34 x 1.88 m - Positive-locking Ortlinghaus clutch Psdpfet Tqglox Abwogn - Not suitable for manual loading operations - The press has been inspected by us and delivered with a current UVV safety inspection certificate.

Kondisi: bekas, Tahun pembuatan: 2015, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, produsen pengendali: Haas, berat benda kerja (maks.): 1.588 kg, tinggi total: 3.023 mm, panjang total: 4.089 mm, lebar total: 3.353 mm, kecepatan rotasi (min.): 40 rpm, kecepatan rotasi (maks.): 8.100 rpm, berat keseluruhan: 6.033 kg, Perlengkapan: dokumentasi / manual, cnc-haas-vmc-de Psdpfxsy N A Nte Abwjgn

Kondisi: bekas, nomor mesin/kendaraan: 007564, Working area X-axis: 3700 mm Working area Y-axis: 1550 mm Worktable type: Nesting table Main spindle power: 10 kW Number of controlled axes: 3 axes Number of drilling spindles: 12 Pgsdpfx Abeum H Ekewjn Number of tool changer positions: 13

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, The machine is equipped with a parts magazine. The parts are returned to the operator. Equipped with 17 spindles. Pedpfx Abjtt Ddcewjgn

Tahun pembuatan: 2014, Kondisi: hampir baru (bekas), "EASY PLUS" electronic control from the control panel, 2 axes: - Automatic control of the left vertical spindle and the upper horizontal spindle position. - Feed speed selection. - 7" color LCD display Min. working width (final dimension): 25 mm Max. working width (final dimension): 230 mm Min. working height (final dimension): 6 mm Podjh Nvt Uepfx Abwjgn Max. working height (final dimension): 120 mm Min. length of a single workpiece: 450 mm Variable feed speed controlled by inverter: 5 - 25 m/min Pneumatic pressure on feed rollers Top feed roller in front of the jointer Feed motor power: 3 kW Jointer motor power: 5.5 kW Vertical spindle motor power (each): 11 kW Upper horizontal spindle motor power: 9 kW Spindle speed: 6000 rpm Spindle diameter: 40 mm Vertical spindle length: 140 mm Horizontal spindle length: 250 mm Vertical spindle axial adjustment relative to the worktable: 40 mm Horizontal spindle axial adjustment relative to the right fence: 40 mm Min./max. cutter diameter on jointer: 120 – 140 mm Min./max. cutter diameter on vertical spindles: 100 – 180 mm Max. profile height on vertical spindle: 40 mm Min./max. cutter diameter on upper spindle: 125 (100-180) mm Feed roller shaft diameter: 140 mm Feed table length: 2000 mm Quick adjustment of infeed table and fence: 10 mm Manual lubrication pump for the table STD