Mesin serut empat sisi

WINTER TIMBERMAX 4-18-S

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer Nwsdpfx Aohlp D Nohwjc - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), 4-sided planer Weinig, 7-head, universal, head arrangement: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and the last one universal. Drive is provided via cardan shafts. The drive is protected with Rotax couplings. Workpiece feed is pneumatic. Feed speed is smoothly adjustable by frequency inverter. Machine feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table newly ground and new. Additionally, new cabling and new electrics. Machine after complete overhaul. Warranty included. Nodpfepqxnxsx Ahwswc

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touchscreen KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm; spindle 4,500 up to 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed carriage motorized positioning - Additional motorized adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 - 230 mm Working height (with tool diameter 125 mm): 10 - 160 mm (tool diameter up to 163 mm) 10 - 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Workpiece machining depends on the following operating parameters: Material, wood moisture, tooling, cutting depth diameter, and feed speed. Parameter adjustments may be necessary as required. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rebate device: diameter difference 20 – 25 mm to planing head Important: unit cannot be operated without a jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Tableplate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Nedpfxowgwmno Ahwswc Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Tableplate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000 - 6,000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inv...

Tahun pembuatan: 2009, Kondisi: diremaj di bengkel (bekas), Four-side Planer, 5-Head, TOS Svitava Lignum Nsdendcg Nspfx Ahwswc Five-head four-side planer, 240 mm working width, with grooved table, completely overhauled FWH 225 mm, total power 23 kW

Kondisi: baru, Tahun pembuatan: 2022, Working width: 410 mm Planing height: 230 mm Cutter block: Tersa Number of knives: 3 Height adjustment: Handwheel Planing thickness display: Scale Feed speed: 7 m/min Infeed roller: Steel Pressure bar: - Outfeed roller: Steel Table rollers: No Motor power: 4.4 kW Extraction port: 100 mm Machine length: 800 mm Nedpji Ezr Eefx Ahwjwc Machine width: 700 mm Weight: 205 kg

Kondisi: seperti baru (mesin pameran), FOR SALE: DEMONSTRATION MACHINE Available for sale is an as-new Drechselmeister Twister FU 200 wood lathe with a centre distance of 715 mm. The demonstration machine is in its original condition and comes with full warranty. Technical Specifications: Nwedpjtpnawofx Ahwec - Centre height: 200 mm - Swing over bed: 395 mm (700 mm with optional outboard turning device) - Centre distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Headstock and tailstock taper: MK2 - Spindle speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight (stand version): 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping charges: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so that we can process your enquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, metal lathe, turning machine, wood lathe, turning, turning tools, woodturning, machine Reference: R-A0117

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 units Working width: 230 mm Planing height: 160 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" touch panel KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency controlled 4,000 – 6,000 rpm - Width and height positioned by motor: left spindle – radial upper spindle – axial - Feed beam positioned by motor DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125 – 163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operational parameters: Material, wood moisture, tools, depth of cut, and feed speed. Adjustments to operating parameters may be necessary, if applicable. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to the planing head Important: System cannot be operated without the jointing rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamp nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" Nedowgwmhjpfx Ahwowc 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-cont...

Kondisi: sangat baik (bekas), Four-sided planer WEINIG Unimat 500 Equipped with memory system control, 3 axes controlled from the operator panel (width, height, pressure roller position), Ribbed table surface, Cutterhead configuration and motor power: bottom cutterhead 7.5 kW, right and left 11 kW each, upper 11 kW, upper 5.5 kW, and lower 5.5 kW, Maximum planing width: 230 mm, Maximum planing height: 120 mm, Fully adjustable spindles, Spindle diameter: 40 mm, Feed on cardan shafts with stepless adjustment, Njdpow Dn I Rsfx Ahwjwc Centralized lubrication system, Machine in original, very good condition. Everything functions as it should. Machine dimensions: length: 470 cm, width: 200 cm, height: 200 cm, Weight approx. 3000 kg.

Kondisi: bekas, SCM Sintex NTE Mesin Ketam Empat Sisi Mesin ketam dan frais profil otomatis elektronik empat sisi Lebar pengetaman: 180 mm Tinggi pengetaman: 105 mm 4 spindle Motor spindle 1 + 4: 7,5 kW Nwsdpfxsyi Eaao Ahwec Motor spindle 2 + 3: 7,5 kW Diameter spindle: 35 mm Meja pemasukan panjang sekitar 2300 mm Kecepatan putar spindle: 6000 rpm Kecepatan pengumpanan: 6/12 m/menit Penyesuaian tinggi dan lebar elektrik Pompa pelumas Termasuk alat ketam Mesin telah DICEK DI BENGKEL dalam KONDISI SANGAT BAIK dari stok Lieboch / OPSI LEASING TERSEDIA

Kondisi: baik (bekas), Tahun pembuatan: 2004, en-Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with independent 7.5 kW motor and spindle brake Speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, axial stops milled to 35 mm height Nodpfx Aewyulujhwewc 3. Left spindle with independent 7.5 kW motor, speed 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter, radial pneumatic pressure guide for different workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, radial NC axis Pneumatic axial control, traverse path 40 mm, glass bead discharge, pneumatically sequenced. - Feed system with 4 kW motor and feed brake - Short piece processing package - UC-Matic package consisting of: PLC control, central motor starting, workpiece monitoring, control terminal, free-standing control cabinet, free-standing operator panel, magnetic interlock of safety hood - Enhanced sound insulation - Automatic dressing and feeding system for different workpiece lengths and widths Workpiece dimensions: Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Driven conveyor belt Belt width: 250 mm, transport length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, radial NC axis - First feed roller sequenced with photo sensors - NC axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 Hydro straight cutter heads 501 with HSS planing knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4