Mesin frais tipe ranjang

Zayer BF3

Kondisi: bekas, Tahun pembuatan: 1984, X-travel 2500 mm y-travel 750 mm z-travel 1000 mm Ppjdpfxotqqnws Al Ier Table clamping surface 2550 x 800 mm Spindle taper SK 50 Control system HEIDENHAIN, TNC 150 B Machine weight approx. 16 t

Kondisi: baru, Tahun pembuatan: 2022, SPECIAL PRICE, in-stock machine, year of manufacture 2022, condition: new List price: €4,200 IN-STOCK MACHINE -- The ARG 235 plus is a manual metal band saw offering high cutting precision. This machine allows for infinitely variable mitre cuts from -45° to +30° (swivel range 45° to the left, 60° to the right). Technical data: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right, round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right, round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left, round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Band speed: 40 and 80 m/min ● Saw band: 2710 x 27 x 0.9 mm Standard features: ● Powerful belt drive ● Infinitely variable adjustment of cutting feed rate from the control panel ● Manual workpiece clamping, vice adjustable via dovetail guide ● Simple setting of the saw for mitre cuts by rotating the saw frame (stops at 45°, 60° and 90°) ● 250 mm material stop without scale Ppsdomftv Rjpfx Al Ier --> Also available in various sizes and configurations!

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm Podpjbn Amfsfx Al Iopr 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Tahun pembuatan: 1999, Kondisi: bekas, KAPAZITÄT 2000 kg HUBHÖHE 4,7 m & 5 m ARM-LÄNGE 3,2 m 2 STÜCK Psdpfowa I A Tex Al Ispr

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tinggi pembubutan: 2.000 mm, berat benda kerja (maks.): 12.000 kg, diameter putar di atas sled silang: 2.500 mm, diameter pembubutan: 2.500 mm, diameter pelat muka: 2.000 mm, tinggi total: 7.260 mm, lebar total: 6.280 mm, panjang total: 4.500 mm, kecepatan rotasi (maks.): 200 rpm, kecepatan rotasi (min.): 1 rpm, torsi: 40.400 Nm, kecepatan spindel (min.): 1 rpm, masa garansi: 24 bulan, berat keseluruhan: 45.000 kg, torsi pelat muka: 40.400 Nm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Vertical carousel-type lathe with flat-bed construction and extensive full equipment package: WITH MILLING FUNCTION - Milling spindle 2,000 rpm SK50 22 kW - C-axis 0.001 degree indexing - Full enclosure - Chip conveyor - Internal coolant supply - Fanuc control - 24 tool stations - 12 milling tool stations - Manual Guide I - Tool holder package - Electronic handwheel - Signal beacon - 2,000 mm manual 3-jaw faceplate - Renishaw tool measurement - Renishaw workpiece measurement - Glass scales on X and Z axes Ppodpevtytxsfx Al Ijr - 24 months warranty

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Ppodpovf E Avofx Al Ier Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: sangat baik (bekas), Maximum turning diameter over bed: 575 mm Maximum turning diameter over carriage: 525 mm Maximum turning diameter over cross slide: 300 mm Distance between centres: 2000 mm Spindle bore diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Ppjdpfowlgdyox Al Ijr Maximum top slide travel: 140 mm Maximum tailstock quill travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Kondisi: bekas, Tahun pembuatan: 1996, Detail Teknis: Berat mesin sekitar: 1750 kg Motor gergaji: 2,2 kW Kebutuhan daya total: 5 kW Kecepatan potong: 17 - 90 m/menit Ppjdevpt Eyspfx Al Ier Diameter potong: 320 mm Area potong maks.: 320 x 320 mm Panjang pisau gergaji pita: 4.930 x 34 x 1,1 mm Panjang pengumpanan: maks 9x 600 mm Kebutuhan ruang sekitar: 2,6 x 2,4 x 1,40 m Mesin gergaji pita otomatis, pemotongan lurus, diameter potong min. 10 mm, panjang potong min. 6 mm, panjang sisa minimum 15 mm (otomatis 80 mm), berat material maks. 400 kg/m, tangki pendingin 60 l, kapasitas pompa 16 l/menit, tekanan penjepit dapat diatur 20-60 bar, konveyor serpihan 2.400 x 950 mm, meja rol 2.200 x 950 mm, 5 pcs. pisau gergaji pita cadangan 4.930 x 34 x 1,1 mm, manual pengoperasian.

Kondisi: bekas, Tahun pembuatan: 1982, Spindle diameter 90 mm X-travel 900 mm Y-travel 900 mm Z-axis 1200 mm W-axis 800 mm Clamping surface table 900 x 1200 mm Rotary motion 360 degrees Table load capacity 6.0 t Spindle speed 25 - 1400 rpm Spindle taper ISO 40 Power supply 380 V / 50 Hz Milling spindle drive 9.2 kW Ppedpfxjtv H Uco Al Ier Total power requirement 35 KVA Machine weight approx. 10 t Space requirement approx. 4.5 x 2.8 x 2.5 m The machine was completely overhauled by the manufacturer in 1994, new control cabinet, new BOSCH servo drives and Heidenhain TNC 360 control (3D control), Facing slide Ø 600 mm, Traverse path 150 mm, The machine is currently not operational due to an electrical fault.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.000 mm, lebar meja: 1.000 mm, panjang meja: 3.500 mm, Mesin milling tipe bed ZAYER dalam kondisi berfungsi baik. Spesifikasi: pergerakan sumbu X: 3200mm pergerakan sumbu Y: 1200mm pergerakan sumbu Z: 1000mm spindel kepala milling: ISO 50 kontrol: Heidenhain TNC410 ukuran meja: 3500x1000mm tahun pembuatan: 1999 Pedjw Uha Hepfx Al Ijpr