Mesin frais kolom bergerak

ZAYER MFU 10000

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), de-hu-it-lt-2024-06-13-1 Pjdswbuyzjpfx Al Ispr

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Ppodpfx Aloxwdyge Ier Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: fungsi terbatas, jam operasional: 43.100 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 550 mm, produsen pengendali: Heidenhain iTNC530, model controller: 530, kecepatan pemakanan sumbu X: 60 m/menit, laju pemakanan gandar Y: 60 m/menit, laju pemakanan sumbu Z: 60 m/menit, pergerakan cepat sumbu Z: 61 m/menit, gerak cepat sumbu X: 61 m/menit, pergeseran cepat sumbu Y: 61 m/menit,

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 475 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, berat benda kerja (maks.): 200 kg, kecepatan rotasi (maks.): 42.000 rpm, diameter meja: 450 mm, 5-axis Röders Tec RXP800DS --completely overhauled-- The machine is fully refurbished, inspected, and measured at our facility. The machine once again meets new-machine tolerance standards! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52 stations Spindle: HSK40E, max. 42,000 rpm Tool measurement laser for tool presetting Handheld control unit Minimum quantity lubrication Prepared for extraction system (e.g. for graphite machining) Spindle compensation Precision package Control system: Röders RMS6, latest version Ppsdpfx Alsvvlmcj Ijr An on-site inspection of the machine in fully operational condition is possible at any time. You are also welcome to visit our website or our Hüttmann YouTube channel to learn more about the type and scope of our refurbished machines.

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 53.776 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 380 mm, diameter meja putar: 500 mm, kecepatan rotasi (maks.): 18.000 rpm, For sale: Deckel Maho DMU 50 eVolution 5-axis simultaneous milling machine The machine is in good condition and immediately ready for operation. Technical Data: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0–180° C-axis: 360° Clamping surface: Ø 500 mm Ppsdpfx Aewxd Agsl Ier Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 × 2,400 × 2,500 mm Weight: 5,500 kg Transport and loading can be organized Europe-wide upon request and at additional cost. All prices plus VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machines Purchase / Sales BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For more information or contact options, please visit our website.

Kondisi: sangat baik (bekas), CNC INFOTEC Machining Center Model: 2515 Ppjdoun Rqgjpfx Al Ier 5 axes Year of manufacture: 2018 Machine working area dimensions for X-Y axes: X 2100 mm, Y 3100 mm Z-axis head travel: 1250 mm Axis travel speed X, Y, Z: X: 80 m/min, Y: 80 m/min, Z: 12 m/min Vacuum table BECKER pump HITECO spindle with HSK 63F tool holder interface

Tahun pembuatan: 1992, Kondisi: bekas, Grinding height: 50 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Total power requirement: 85 kW Machine weight approx.: 9,500 kg D I S K U S CNC-controlled vertical double-sided surface grinding machine with rotary workpiece feed and IONIC measuring control system. Model: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel diameter: each 600 x 150 x 75 mm (height) Workpiece data: Grinding height approx.: 1.5 – 50 mm Grinding width approx.: 20 – 120 mm Vertical quill adjustment, each approx.: 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed, continuously variable: 40 – 235 mm/sec Grinding wheel speed each (30 m/s): 191 – 955 rpm Grinding spindle drive, infinitely variable: each 37 kW Total drive approx.: 85 kW / 380 V / 50 Hz Weight approx.: 9,500 kg Accessories / Special equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (infeed top and bottom, dresser, and workpiece rotary table), direct input of all grinding data, and in combination with: • IONIC measuring system no. 17A with 2 probes for scanning the workpieces after the grinding process, triggers appropriate infeed of the grinding wheels, ongoing measurement results displayed on monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for drive motors and grinding wheel speed • Portal design for higher stability and precise grinding results • Rotary workpiece transport with continuously variable speed as fourth axis • Position monitoring device for supervising the position height of the lower grinding wheel • 2 adjustable workpiece hold-down devices at infeed and outfeed, height monitoring, simple raw part stacking device, and finished parts removal by conveyor belt • Angled, side-mounted dressing device with programmable dressing cycle, CNC axis integrated into the control unit, with safety cut-off • Large separate control cabinet, automatic central lubrication, sophisticated pneumatic system • Large PROMATEC (F) coolant system with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction unit, etc. This machine is particularly suitable for simultaneous, perfectly parallel grinding of workpieces in large batches such as stamped parts, piston rings, hydraulic components, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This is a very rare opportunity in terms of both condition and price. Podpfet Hw Naex Al Ijpr Should you require another grinding machine – particularly from DISKUS – please send us your inquiry.

Kondisi: baik (bekas), Tahun pembuatan: 2014, tinggi pusat: 180 mm, lebar di tengah: 600 mm, diameter penggilingan: 260 mm,

Tahun pembuatan: 2022, jam operasional: 108 h, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: SN2120, EDM312MF30-SLM (second-life machine) Technical Specifications: Travel paths: 450x300x300 mm Workpiece clamping table: 820x400 mm Tank size: 900x520 mm Filling height: 300 mm Distance table/electrode holder: 150/450 mm Max. workpiece weight: 800 kg Max. dielectric fluid volume: 700 l Dimensions (W x D x H): 2700x1800x2350 mm Machine weight: 2500 kg Power supply: 3/N/PE 400/230V 50Hz Power consumption: 6.7 KVA Features: Color: Newly painted light grey + tele grey New control cabinet New APC910/2 control unit (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A Rev.4 generator 5-fold tool changer Touch guard operable by button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma chiller Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling button Pedshtrdyjpfx Al Ispr Automatic tracking lowering tank Chuck: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 29.081 h, Fungsionalitas: berfungsi sepenuhnya, FPT Industrie S.p.A. – Travelling Column/Portal Milling Machine Model: DINOSPIN Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine Weight: 44,280 kg Control System: Heidenhain TNC640 (15") RAM: 4 GB Hard Disk: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (Remote handwheel) Universal Milling Head (5-axis machining, simultaneous movement of 2 axes) Max. Spindle Speed: 18,000 rpm Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Working Torque A/C: 450 Nm Axis Clamping Torque: 1,400 Nm Positioning Uncertainty: 8 arcsec / Scatter: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Spindle Torque (S1/S6): 84/128 Nm Continuous Operation Constant Power: 2,500–18,000 rpm Continuous Operation Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid Tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped-wheel, with changer arm) Magazine Capacity: 80 Max. Tool Ø: 75 mm Max. Tool Ø with free adjacent pocket: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: Tool length/radius + tool breakage detection (software included) Probe for workpiece measurement/alignment: Wireless transmission, cycles included in CNC Monitoring Sensor for vibration/collision detection: Response time approx. 1 ms Coolant System external/internal (LEU/LEIUHP) Tank Volume: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External Cooling: max. 30 l/min, max. 10 bar ICS (Internal Coolant Supply): max. 30 l/min, max. 70 bar Additional Options/Features Ppsdsyrndmopfx Al Ijr External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm