Rak palet 25 m Nedcon

25 lfm Palettenregal Nedcon H 3,5 m T 110 cm Auflast /Fach 3050 kg

Kondisi: bekas, Tahun pembuatan: 1986, Tekanan 160 t Jangkauan 360 mm Langkah 500 mm Kecepatan turun 200 mm/detik Kecepatan naik 125 mm/detik Jarak maksimum meja - penekan 1000 mm Dimensi meja 900 x 630 mm Dimensi penekan 850 x 450 mm Diameter x Kedalaman pin penjepit 50 H7 / 85 mm Kebutuhan daya total 17 kW Rjdpov Rgwxofx Adcsch Berat mesin kira-kira 7 t Kebutuhan ruang sekitar PxLxT 1,25 x 2,2 x 3,45 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel Paths: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid Traverse: X, Y, Z: 30 m/min Feed Force: X, Y, Z: 3,700 N Resolution: X, Y, Z: 0.0001 mm Rotational Movement of the Motor Spindle – B Axis Rotational Range: -15 – 100° Rotational Range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. Speed: 20 rpm Drive Torque: 750 Nm Hydraulic Clamping: 50 bar Holding Torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100%: 10 kW Power at 25%: 15 kW Rated Torque: 100%: 8 Nm 25%: 12 Nm Speed Range: 50 – 30,000 rpm A Axis (Bar Capacity Ø 40 mm) Spindle Type: A4 Max. Bar Diameter: 40 mm Max. Speed: 35 rpm Drive Torque: Nominal: 112 Nm Max: 238 Nm Resolution: 0.0001° Axis Clamping (A Axis): Pressure: 70 bar Holding Torque: 130 Nm Tool Changer Number of Tool Disks: 2 Positions per Disk: 24 Max. Tool Weight: 1 kg Rotation Speed: 60 rpm Max. Tool Diameter (adjacent positions occupied): 50 mm Max. Tool Diameter (adjacent positions free): 63 mm Max. Tool Length (from spindle nose): 95 mm Secondary Slide Travel Path: 80 mm Feed Force: 1,700 N Tilting Moment: 90 Nm Resolution: 0.0001° Hydraulic Pressure for Tilting: 100 bar Workpiece Manipulator Pneumatic Vertical Slide Gate: Ø: 25 mm Stroke: 710 mm Linear Stroke per Motor Revolution: 70.4 mm/rev Max. Transfer Speed: 60 m/min Max. Workpiece Weight: 5 kg Max. Manipulator Stroke: 1,120 mm (2×560 mm) Max. Vertical Stroke: 150 mm Part Intake Ø / Length: Ø 32 mm / 100 mm Part Ejection Ø / Length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip Force: 45 N (at 6 bar) Max. Gripper Opening: 14 mm (2×7 mm) Pneumatic Equipment Operating Pressure: 6 bar Hydraulic System Operating Pressure: 95 – 105 bar Rcsdpfx Aowv Hnmsdcsh Coolant System Coolant Tank Volume: 80 liters Chip Tray Volume: 30 liters Kinematic Viscosity in Operation: 10 – 15 cST SCOPE OF SUPPLY Including, but not limited to: - Willemin Macodel W 408 B Machining Center - Extraction unit - Fire extinguishing system - Probe - Coolant system - Oil cooler - Data backup - Complete operating documentation - Exact scope of supply as per photo series No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Kondisi: bekas, Tahun pembuatan: 1998, Grinding length 2000 mm Grinding width 600 mm Total power requirement 17 kW Machine weight approx. 10 t O F F E R We are pleased to offer you ex stock, subject to prior sale and errors excepted, without obligation: GEIBEL & HOTZ CNC cycle-controlled surface and profile grinding machine type FS 2060 - GT SL Rcodpfxov S Ip Ej Adcjh year 1998 1013220998 _____ Grinding length max. (max. table longitudinal movement 2,050 mm) 2,000 mm Grinding width max. (max. cross movement 600 mm) 600 mm Grinding height under wheel max. approx. 600 mm Distance table – spindle center min. / max. 180 – 800 mm Table size 2,300 x 550 mm Magnetic chuck size 2,000 x 600 mm Table load max. 3,110 kg Table speed 0 – 35 m/min Cross movement intermittent 0.5 – 60 mm/stroke Cross feed / rapid traverse 0 – 4,000 mm/min Grinding wheel dimensions, standard 400 x 100 x 127 mm Grinding spindle speeds, stepless 1,000 – 3,000 rpm Grinding spindle drive approx. 11 kW Total connected load approx. 25 kW - 400 V – 50 Hz Weight approx. 9,500 kg Accessories / Special equipment • Dialog-controlled GEIBEL & HOTZ automatic grinding cycle control type SL for 3 axes. Graphical supported input of data in absolute values or via teach-in method into preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and clear monitoring of axis movements and job progress. • Electronic handwheel for 3 axes X, Y, Z, feed rate switchable 0.01 / 0.1 / 1 mm/rev. • Table movement via roller ring screw drive (GT), allowing both very high and very low table speeds with constant torque and high efficiency. • Cross and vertical movements via ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on table. (Machine was previously equipped with electric straight dressing device EGA 100, which is no longer present.) • MPM fully automatic balancing device AB 100 (flange-mounted sensor currently missing). • Mounted, fine-pole electromagnetic chuck 2,000 x 600 mm with adjustable holding force. • Wet grinding device with universal paper band filter system UPF 100 with magnetic separator. • Full enclosure of working area with electrically monitored sliding doors. • Separate control cabinet, separate mobile control panel, various accessories, operating instructions. Condition : Good to very good condition! Suitable for all grinding tasks! A video of the machine will be available shortly—please click here to view soon. Delivery : ex stock, available immediately, FCA Metzingen Payment : strictly net - upon receipt of invoice

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side Rsdpfxsh Ek Dae Adcjch - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel Rodsu N A Uuspfx Adcjch - No UVV (accident prevention regulations) - As is

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, berat keseluruhan: 1.550 kg, kecepatan pemotongan: 2.800.000 mm/menit, el Rcedpfx Adeyhfm Docjh

Kondisi: sangat baik (bekas), 150 m rak palet Jungheinrich Tipe MPB Barang bekas, kondisi sangat baik, lihat gambar. Tinggi 3,9 m Kedalaman 110 cm, warna biru Kapasitas beban per bidang 8,4 ton Panjang penyangga 2,7 m, warna kuning Penyangga dengan kapasitas beban/bidang 2400 kg Harga yang dapat dinegosiasikan: € 9.780,-- (netto, diambil di gudang) Penawaran meliputi: + 52 unit rangka, sudah dirakit sebagian, kedalaman 110 cm, tinggi 3,9 m + 204 unit penyangga, panjang 2,8 m, kapasitas beban 2400 kg/bidang + 408 unit pengaman pengait + 208 unit jangkar beton Pelat kapasitas beban, dokumen, dll. sudah termasuk. Aksesori tambahan dapat ditemukan di katalog aksesori. Barang tersedia di gudang. Transportasi dan pemasangan dapat dilakukan sesuai permintaan. Inspeksi dapat dilakukan kapan saja dengan perjanjian sebelumnya. Informasi lebih lanjut tersedia sesuai permintaan. Selalu tersedia lebih dari 5000 m rak palet dari berbagai produsen di gudang. (Perubahan dan kesalahan dalam data teknis, spesifikasi, dan harga, serta kemungkinan penjualan antara waktu, dicadangkan! Lihat Ketentuan Umum kami, semua harga tidak termasuk PPN, diambil di gudang) Lenox Trading – Penyedia teratas untuk peralatan gudang & rak beban berat, baru & bekas Teks deskripsi: Apakah Anda mencari rak gudang berkualitas tinggi untuk dibeli? Lenox Trading, dengan sekitar 100 karyawan, adalah salah satu pedagang terbesar untuk peralatan gudang baru dan bekas di seluruh wilayah DACH (Austria, Jerman, Swiss). ⚡ TERSEDIA SEGERA: Rjdpfxjp Dunfe Adcsch • Lebih dari 10.000 meter rak, siap dikirim • 20.000 m² platform gudang & platform baja, tersedia segera • 30–50 unit truk trailer dengan muatan barang mingguan untuk pilihan maksimal 📦 RANGKAIAN PRODUK KAMI (BELI SECARA ONLINE DENGAN HARGA TERBAIK): Baik itu rak palet, rak beban berat, rak tinggi, rak rak, rak ban, atau rak untuk wadah IBC – kami mengirim dan memasang di seluruh Eropa dengan TIM KAMI SENDIRI! Termasuk perencanaan CAD, transportasi, pembongkaran, dan pemasangan. 🏭 MEREK TERBAIK, BARU & BEKAS/DARI LIKUIDASI KEPALAAN: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tipe MPB, Tipe E, Rak beban berat Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Rak lengan (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 BISNIS KAMI YANG LAIN: LELANG ONLINE & LIKUIDASI Untuk pekerjaan pembongkaran dan pembersihan, kami menawarkan paket lengkap: 1. Pembelian tetap: Pembelian barang dagangan, peralatan & seluruh persediaan gudang termasuk pembersihan menyeluruh. 2. Lelang komisi: Pelaksanaan lelang atas nama. Layanan lengkap kami oleh karyawan kami sendiri: Katalogisasi, persiapan kantor, inspeksi, penyerahan barang, logistik, pembongkaran, dan penyerahan setelah pembersihan menyeluruh. Baik Anda menemukan kami melalui rak beban berat atau mencari rak beban berat galvanis / sistem rak beban berat – kami menjamin kondisi terbaik. Hubungi kami untuk penawaran tanpa kewajiban!

Kondisi: baik (bekas), Price plus VAT. The goods are also available in other quantities and configurations. This package includes: 14 uprights, 5,000mm x 1,100mm (blue) 78 beams, 2,700mm (yellow) 156 safety pins This results in a racking row with 13 bays, each with 3 levels plus floor storage position—a total of 156 pallet spaces (1,000 kg per pallet). Approx. 70 uprights and 1,000 beams are available for this system. Please feel free to contact us. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 5,000 mm Total length: approx. 36.50 linear meters Racking depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Shelf load: 2,400 kg Bay load: 12,000 kg Pallet positions: 156 Accessories such as: - Floor anchors - Connectors - Load warning signs - Impact protectors - Guardrails - Wire mesh shelves - Rear mesh panels - Support bars - Barrier rails Rsdpfxsibwruj Adcoch ...and much more. Just ask for a quote!

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Rcedpfx Ast U R Hzjdcoh Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: siap digunakan (bekas), Pressing force: 1600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Rjdpfx Adohz Ua Sjcoch