Beli Mesin frais alat universal konvensional, langkah sumbu X 0–399 mm bekas (122)

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Dear Sir or Madam, We hereby offer a DECKEL FP1 three-axis milling machine, upgraded with modern safety features. These later model machines are equipped, among other things, with central lubrication, an electric coolant pump, and a brake motor. The control cabinet can be quickly disconnected from the machine thanks to a Harting connector. Safety components are also connected to the control cabinet using this connector type, so that handling is in no way impaired. The retrofitted safety features—which we offer for every machine type—come with a 12-month warranty! *The electronic spindle guard can be adjusted in multiple axes and is designed to prevent access to the working spindle as well as to protect against flying chips, coolant, etc.* *The electronic spindle guard cap prevents access to the rotating spindle stub and tool clamping system.* Delivery time: on request Year of manufacture: 1989-1992 Machine no.: 2102-xxxx Table: fixed angle table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid feed: 1200 mm/min Equipment and accessories include, among others: 3-axis digital display with Heidenhain active control, coolant device, central lubrication, machine mounts, technical documentation, electronic spindle guard, electronic spindle guard cap Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced beforehand - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tooling directly - Upon request, we can install extra accessories such as safety features, etc. - We are happy to take care of shipping and/or installation for you. Bwodpfx Ajx Rvlqed Rjk

Kondisi: bekas, Weight approx.: 450 kg Dimensions (LxWxH): 1250 x 1350 x 1550 mm Y-axis travel: 300 mm Z-axis travel: 200 mm X-axis travel: 350 mm Speed range: 80–2200 rpm Table size: 600 x 200 mm Description: -) Coolant system -) Machine light -) Including machine vise Spindle speeds: 80 – 2200 (8 steps) rpm Taper: DIN2078 ISO30 (drawbolt M12) Working area: 300 x 200 x 350 mm Table: 600 x 200 mm Rapid traverse X,Y: 1200 mm/min Quill stroke: 45 mm Max. feed force: 1600 Nm Spindle motor: 1.1/1.4 kW Vertical table: 600 x 200 mm Distance vertical milling spindle – table: 20–370 mm Distance horizontal milling spindle – table: 84–434 mm Infinitely variable feed in X-axis: 20–200 mm/min Bodpfergvbpex Ad Rswk Length: 1250 mm Width: 1350 mm Height: 1550 mm Weight: 450 kg

Kondisi: baik (bekas), Tahun pembuatan: 1995, Universal tool milling machine Deckel FP 1 – several machines available (see photos) Model: FP 1 3-axis digital readout (Heidenhain) Price: from €9,500 excl. VAT Technical data: X travel: 300 mm Y travel: 150 mm Z travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range – vertical: 250 – 2,000 rpm Spindle speed range – horizontal: 40 – 315 rpm Spindle speed steps (working spindle): 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Bwodpfjtdcfhex Ad Rok Spindle taper: SK 40 Dimensions/weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Kondisi: baik (bekas), Tahun pembuatan: 2005, en-24012 Bodpfx Aerywa Rod Rewk

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis Heidenhain digital readout Bsdpfx Adeu Nvxme Rewk Original condition!!! Technical data: >> Machine No. 56560/08 Year of manufacture: approx. 1975 >> Fixed angular table >> Spindle speeds: 40 - 2000 rpm >> Feed on 2 axes >> Motor power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and more precise. You are welcome to view and test the Deckel under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes Bwodpfot Aav Iox Ad Rek >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual. Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and Stepless Feed on All Axes – Excellent Condition Technical Data: Bodpfx Adst Aarps Rowk >> Year of manufacture: 1985 Machine no.: 2102-2867 >> Swivel-tilt rotary table (recently planed) >> Spindle speed range: 40 – 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the column >> Vertical and horizontal quill – SK40 taper >> Drawbar system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C – newly installed, with manufacturer warranty and user manual. Display unit: reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circle functions, hole patterns, radius milling functions, and more. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a universal milling machine Deckel FP1 from 1985 in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speed, the milling machine runs very quietly. This newer FP1 model features stepless feed regulation on all three axes, as well as rapid traverse on these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital readout from K&C makes operation easier and even more precise. Arrange a viewing and live test operation on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout – As new condition!! Bwodpfx Adowpi Dqe Rok Technical Data: >> Machine no.: 2101-51084, year 2011 >> Rigid angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal spindle taper: SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. The scope of delivery includes a hydraulic vise with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP1 live under power at our facility. The machine is available immediately.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF, Overhauled in 2006, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill – SK40 taper >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: Bwodjvb Ud Uspfx Ad Rok >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine leveling feet About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition. The Deckel features minimal backlash and all spindles move easily. An oil change has been carried out. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen little use since. The RSF digital readout makes operation easier and more precise. Take advantage of the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Bwedpfxeu Racrs Ad Rek Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: Bedpfx Aeu T D Nred Rowk >> Year of Manufacture: 1992 Machine No.: 2102-6289 >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW Bjdpju Nvwvsfx Ad Rjwk >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis digital display Heidenhain ND 780. As new condition! Technical details: >> Machine No. 55249/08, year 2010 >> Fixed-angle table >> Spindle speed: 40 - 2000 rpm >> Feed: 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm Bwsdpfx Adexu Hbhe Rsk >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar: S20x2 >> Weight approx. 700 kg Equipment and accessories: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic machine vise >> Collets >> Tool holders >> Cutters >> Operating manual >> Coolant system About the machine: For sale is a universal milling machine Deckel FP1 repowered by FPS, in like-new condition. The package includes a hydraulic vise with swivel base, collets, tool holders, and cutters. Mechanically and electrically inspected. The Heidenhain digital readout simplifies and improves accuracy of operation. You are welcome to inspect and test the Deckel under power at our location. The machine is immediately available.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalog Bwjdpfx Adju R D I So Rok About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, light grey, excellent CONDITION Technical Data: >> Year of manufacture: ca. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Bwjdpfjxu E R Ijx Ad Rok >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all spindles move freely. Even at maximum spindle speeds, the milling machine runs very smoothly. This newer FP1 model features stepless feed adjustment in all three axes, and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions which the machine will move to automatically. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site. The machine is immediately available.

Kondisi: baru, Tahun pembuatan: 2025, panjang pemakanan sumbu X: 300 mm, panjang umpan sumbu Y: 165 mm, panjang umpan sumbu Z: 280 mm, jarak pergerakan sumbu X: 310 mm, jarak lintasan sumbu Y: 170 mm, jarak gerak sumbu Z: 330 mm, gores kuas bulu: 70 mm, kecepatan spindel (maks.): 2.600 rpm, kecepatan spindel (min.): 40 rpm, berat keseluruhan: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC. This model is a true all-rounder, ideal for training applications and small-batch production. The Macmon features a conventional base in combination with a Heidenhain TNC128 CNC path control, making this machine an essential must-have in specific working environments. Best of all: With a footprint of just one square meter, this machine fits into any workshop! Technical Standard Specifications: • Heidenhain TNC 128 control (integrated in the control panel) • Ribbed cast iron construction with hardened and ground guideways on column and carriage • Swiveling vertical head 360º • Extendable quill, travel 70 mm • Removable vertical head for switching between vertical and horizontal milling operations • Dovetail guides on all axes • Ground ballscrews on all axes • Mechanical tool clamping for vertical and horizontal spindle • Tool holder ISO 40 for tools according to DIN 2080 AT 3, with draw thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical mounting surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) • HEIDENHAIN linear encoders, direct, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeatability 0.005 mm Bjdpfxox H Nw Se Ad Rowk • Horizontal milling attachment, console and end support • Chip tray, blue RAL 5019 • Paint finish blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 CD programming instructions for TNC 128 • 1 inspection record and basic wiring diagram • 1 hand-operated oil pump • With support bearing, bushing ø 16 mm (plain bearing) for milling arbor length 230 mm • Machine lamp • Chip guard (required safety device according to EN 13128 for EU countries)

Kondisi: baik (bekas), MESIN FRAIS PERKAKAS - Macmon M 100 - Tampilan digital - Perjalanan sumbu X/Y/Z: 310x340x170 mm - Rentang putaran: 40-2500 rpm - Otomatis pemberian makan - Rentang pemberian makan bertingkat: 9-450 mm/menit - Dudukan alat ISO 40 - Kepala vertikal dapat diputar - Spindel bor / kepala vertikal 70 mm - Fasilitas milling horizontal-vertikal - Meja sudut tetap 600x225 mm - Sistem pendingin - Daya penggerak 2,5 kW - Wadah serutan - Lampu kerja - Kaki mesin - Dokumentasi Dimensi: PxLxT 1,5x0,8x1,7 meter / Berat: 950 kg Bsdex H Iz Aepfx Ad Rswk Kesalahan dan kekeliruan input dapat terjadi.

Kondisi: bekas, Tahun pembuatan: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop inspected Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: Bweder En Dyepfx Ad Rjk - 3-axis digital readout HEIDENHAIN TNC 113 With active function in X-, Y- and Z-axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 With drawbolt thread S 20 x 2 - Coolant system - Centralised lubrication, electric - Operating manual Sold as seen, without warranty The machine complies technically with the state of the art at the time of manufacture.

Kondisi: bekas, Slotting head, slotting attachment suitable for DECKEL milling machine type FP 2 Serial No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke length: max. 80 mm Strokes: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke length adjustable via eccentric adjustment - Driven by the machine’s gearbox, within the dovetail guideway (like standard vertical head) - This slotting head is inserted into the dovetail slideway in place of the standard vertical milling head (mounted in place of the vertical head, milling head) - Drive gear in slotting head has 39 teeth, gear width 16 mm, assumed 20° pressure angle - Slotting attachment rotatable 360° at the flange plate, degree scale +/- 35° Weight: 32 kg very good condition Bedpfowbi Rbjx Ad Rewk DECKEL FP1 has a 15° pressure angle at the drive gear DECKEL FP2 + FP3 – have a 20° pressure angle at the drive gear

Kondisi: bekas, Universal tool milling machine DECKEL Type FP 1 Universal milling machine Machine no. 2101 - Year of manufacture: 1979 Manual travels X: 300 mm Y: 160 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Power connection: 380 Volt, 50 Hz - Infinitely variable feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and can extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant device integrated in machine base - Freestanding control cabinet - Original chip tray for mounting on machine base - Electrical circuit diagram available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Bedpfx Aor U St Ujd Rowk Good condition

Kondisi: baru, en001 Bwedpfxjd R S Nds Ad Rjk

Kondisi: baik (bekas), Tahun pembuatan: 1980, nomor mesin/kendaraan: 4038, jarak pergerakan sumbu X: 290 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 330 mm, diameter pemasangan: 40 mm, panjang meja: 600 mm, lebar meja: 210 mm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, berat keseluruhan: 700 kg, CONDITION & NOTES: Bwjdpfx Adswxpxms Rjk - This is an active, axis-controlled tool milling machine.

Kondisi: siap digunakan (bekas), Deckel_FP2NC_DE_EN Bsdpfxjxfkm Ae Ad Rswk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feeds, very good condition, CE compliant Technical data: >> Year of manufacture: 1992; Machine no. 2102-6209 >> Rigid angle table (newly planed) >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100mm >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bsdpoxdi Ivsfx Ad Rewk >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speed the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, making the machine easier to transport. On this newer FP1 model, feed on all three axes is steplessly adjustable, and the machine also offers rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain distance control, you can enter dimensions which the machine will then automatically approach. The FP1 was previously in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this machine under power onsite.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Bsdju Tuk Hjpfx Ad Rjwk