Beli Mesin gerinda silindris dengan panjang penggerindaan 600–1099 mm bekas (196)

Kondisi: bekas, specs-001 Gbedpsxmg Eksfx Ah Roi

Kondisi: bekas, es-en Gjdpfxexxmcge Ah Robi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 20.995 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W11106617/144, panjang penggilingan: 1.000 mm, diameter roda gerinda: 400 mm, diameter penggilingan: 390 mm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 12 m/menit, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding diameter: 0–390 mm Internal and external grinding: up to 1 m Max. workpiece weight, cantilevered (MT 4): 100 Nm Max. workpiece weight between centers: 250 kg X-Axis Feed Rapid traverse: 350 mm Rapid feed speed: 12 m/min Incremental feed: 0.0001 mm Z-Axis Feed Max. travel: 1,150 mm Traversing speed: 12 m/min Linear scale resolution: 0.0001 mm Spindle Data Internal grinding spindles: 80 x 350 mm Grinding Spindle Headstock Grinding wheel diameter: 400 mm Drive power: 5.5–7.5 kW Peripheral speed: 25–50 m/s Workpiece Headstock Speed range: 1–1,000 rpm Internal taper: MT4 Centering diameter: 63 / 80 mm Tailstock Quill taper: MT4 Quill stroke: 45 mm Filtration and Extraction Paper band filtration system: 350 l tank Mechanical mist extraction: 600 m³/h MACHINE DETAILS Operating hours: 20,995 h Gbedpfx Ahew Nwxue Rji EQUIPMENT Full enclosure Manual balancing system Touch-trigger longitudinal positioner Leveling feet for alignment Grinding centers MT4 solid and half point carbide Dressing tool 0.5 carat diamond

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Internal grinding spindle speeds, stepless: 9,500–50,000 rpm Workpiece table feed, stepless: 50–10,000 mm/min Workpiece headstock swiveling: 90 degrees Max. grinding wheel diameter: 400 mm Spindle bore: 30 mm Grinding length – plunge-cut method: 80 (100) mm Max. grinding depth for internal grinding: approx. 170 mm Max. bore diameter to be ground: 90 mm Feed speed: 240 mm/min Max. workpiece weight: 80 kg Coolant consumption: 36 l/min Distance between centers: 650 mm Distance workpiece spindle – taper tip: 960 mm Drive power – spindle motor: 6.25 kW Connected load: approx. 10 kW Gbedecxxubopfx Ah Rsi Total power requirement: 8.5 kW Machine weight approx.: 3.4 t Space required approx.: 3.9 x 2.5 x 1.85 m With Studer control, electric/hydraulic drive, stepless speed adjustment, tailstock with fine adjustment and hydraulic retraction, high-precision workpiece headstock, table air-lift, hydraulically retractable dressing device, radius dressing device, hydro-cyclone filter, automatic grinding wheel balancing unit, automatic dressing cycle with speed compensation, internal grinding attachment.

Kondisi: bekas, Tahun pembuatan: 1987, nomor mesin/kendaraan: 6004.01, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Workpiece weight: 120 kg Drive power: 5.5 kW Speed: max. 25,000 rpm Control system: FMS 5-88 Approx. machine weight: 3.5 t Gbodedmppqopfx Ah Rei - Fully mechanically overhauled, CNC-controlled precision cylindrical grinding machine - Extensive range of accessories - Coolant system - Electronic handwheel - Separate control cabinet - Emergency stop safety feature

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 180 mm, berat benda kerja (maks.): 70 kg, lebar di tengah: 650 mm, diameter roda gerinda: 400 mm, berat benda kerja di antara senter: 250.000 g, The machine has been completely overhauled and inspected by the seller! TECHNICAL DETAILS Working Area Centre distance: 650 mm Centre height: 180 mm Workpiece weight: max. 70 kg (between centres, unsupported) / max. 250 kg (between centres) Godpswy Rnfsfx Ah Rjbi Grinding wheel diameter: 400 mm Workpiece Spindle Taper: MK4 Speed: 30 - 450 rpm Swivel range: 0 - 90° Motor power: 0.55 kW Tailstock Taper: MK4 Quill stroke: 45 mm Quill force: 200 - 600 N Adjustments and Travels Table swiveling: 10° Cross-slide travel: 80 mm Rapid traverse: 50 mm Coarse positioning (air cushion): 280 mm MACHINE DETAILS Drives External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Weight Machine weight: 3,600 kg EQUIPMENT Air cushion-supported rapid adjustment of the grinding spindle headstock Separate drive for spindles for external and internal grinding Fully automatic operation with rotary switch Automatic longitudinal grinding cycle Central coolant supply to all grinding positions Workpiece headstock with infinitely variable drive Infeed control for longitudinal and plunge grinding

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 180 mm, berat benda kerja (maks.): 70 kg, lebar di tengah: 650 mm, diameter roda gerinda: 400 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Overhauled cylindrical grinding machine, year of manufacture 2024! No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Distance between centers: 650 mm Center height: 180 mm Workpiece weight: 70 kg (rotating), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece Spindle and Tailstock Workpiece spindle: MT 4 Speed: infinitely variable 30–450 rpm Swivel range: 0–90° Tailstock: MT 4 Quill stroke: 45 mm Quill force: 200–600 N Axes and Adjustments Table swivel adjustment: 10° Gsdpfxewy Ufuj Ah Rebi Infeed spindle adjustment travel: 80 mm Rapid traverse travel: 50 mm Coarse adjustment with air cushion: 280 mm MACHINE DETAILS Motor External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Machine weight: 3,600 kg EQUIPMENT Infeed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock Separate drive for external and internal grinding spindles Fully automatic operation: rapid infeed, rapid return, grinding operation, infeed stop, micron infeed Automatic longitudinal grinding cycle Central coolant supply Infeed control for plunge and longitudinal grinding

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 200 mm, berat benda kerja (maks.): 500 kg, panjang penggilingan: 1.000 mm, lebar di tengah: 1.100 mm, diameter roda gerinda: 500 mm, As-new cylindrical grinding machine, year of manufacture 2025! TECHNICAL DETAILS Working Area Centre distance: 1,100 mm Grinding length: 1,000 mm Centre height: 200 mm Workpiece weight: max. 500 kg Grinding wheel diameter: 500 mm Grinding wheel width: 110 mm Peripheral speed: 50 m/s X-Axis Travel: max. 400 mm Speed: 0.001 – 12,000 mm/min Position feedback system resolution: 0.0001 mm Z-Axis Travel: max. 1,070 mm Speed: 0.001 – 12,000 mm/min Position feedback system resolution: 0.0001 mm Grinding Spindle Headstock Grinding spindle motor: 7.5 kW Automatic regulation of grinding wheel peripheral speed Workpiece Headstock Speed range: 0 – 500 rpm Spindle bore: 30 mm Tailstock Stroke: 50 mm Fine adjustment: ±1.5 mm Control Control system: Siemens 840 D sl MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,050 x 1,950 mm Machine weight: 8,300 kg Total connected load: 30 kW Gbodewy N Udepfx Ah Rji Compressed air: 6 bar

Kondisi: baru, Tahun pembuatan: 2025, New cylindrical grinding machine – or save around 70% with FlexiGrind? Simple CNC control retrofit for your existing cylindrical grinding machine with FlexiGrind! Modernizing existing cylindrical grinding machines has never been easier. FlexiGrind offers a cost-effective and efficient solution: instead of a complete overhaul, the FlexiGrind control kit replaces only the outdated electronic and electrical components. The retrofit is carried out directly on-site, minimizing downtime and avoiding the high costs associated with investing in a new machine. Thanks to an easy-to-understand installation manual, the upgrade can be performed either by your own maintenance team or by our assembly technicians. The FlexiGrind kit replaces all obsolete, critical components of your cylindrical grinder, such as control unit, control cabinet, drive motors, length measuring systems, and wiring – all in a single step. The kit includes the following hardware components: • State-of-the-art control unit for precise grinding and easier operation from FANUC and SIEMENS • New control cabinet with clear layout • Three new axis servomotors for WSP, X, and Z axes • Adapters for the new servomotors • New grinding spindle motor for precise spindle speeds Gbjdpfxjvfp Uvo Ah Rei • New absolute linear measuring systems for highest precision • New Euchner safety switches for maximum safety • Completely new wiring for reliable operation In addition, the kit comes with user-friendly software, allowing for simple operation and a quick restart of production. All necessary documentation for installation and programming is included. The FlexiGrind kit meets the latest safety standards and is CE-certified. Simply replace your old control system and defective components with our new FlexiGrind control kit. Control system retrofit made easy – suitable for any maintenance team, thanks to the clear installation instructions! Versatility and Compatibility The FlexiGrind kit is specifically designed for CNC cylindrical grinding machines from Karstens and Bahmüller, but is also available for machines from other manufacturers such as Studer, Tacchella, Kellenberger, Junker, and EMAG, subject to agreement. Request your control system retrofit today and get your faulty or outdated cylindrical grinder running smoothly again!

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 180 mm, panjang penggilingan: 1.000 mm, lebar di tengah: 1.000 mm, diameter roda gerinda: 400 mm, diameter penggilingan: 360 mm, model controller: Steuerung Siemens 840 D, TECHNICAL DETAILS Grinding length: 1,000 mm Centre height: 180 mm Centre width: 1,000 mm Gedpfx Aov Rfz Ash Rsbi Grinding diameter: 360 mm Grinding wheel diameter: 400 mm Control system: Siemens 840 D EQUIPMENT - Touch dressing (dressing detection) - Coolant system - Internal grinding spindle - Flanges

Kondisi: bekas, Internal diameter: 340/440 mm Grinding depth: 99999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Cross feed (in increments): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (chucked): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we deliver machines in as-new condition with warranty and can also provide service for your machines (Warranty: 12 months from delivery – for Germany and neighboring countries). Dedicated internal grinding machine with infinitely variable drive 0–100%. Now available in current color schemes!!! Standard centre height: 175 mm. Upgradeable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversal accuracy max. 0.01 mm! Geometrically overhauled and newly painted with: - New control cabinet - New workpiece spindle motor and controller with three-phase technology - 2-axis digital readout, resolution x-axis 0.5 µm Options: - Rotary encoder with digital readout in workpiece headstock Gbsdpfx Ahod Ih Dxo Rsi - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, height-adjustable - Increase of centre height to max. 225 mm Included: - Operating tools Further accessories on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as defined in the BetrSichV 2015. Raising the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter 250, 350, 450 mm Grinding length 600 mm Centre height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workhead swivelling 360° Grinding head swivelling 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed rate 0.001–0.030 mm/Ø Continuous feed rate 0–0.95 mm/Ø Table swivelling ±10° Table longitudinal travel 900 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (unsupported) 130 kg including clamping Internal spindle mount 70 mm Total connected load 6.5 kW Machine weight approx. 2.2 t Required space approx. 3.1 x 2.0 m As a world-leading company in Kellenberger overhauling / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer you service for your machines metric overhauled and newly painted. Version R: Machine features central lubrication and roller guides in the flat bed of the X-axis as well as air lift in the grinding headstock. -Digital readout with 2 axes. Resolution X-axis 0.5 µm Available options at extra cost: Gbsdpfx Asd Ih D Njh Roi -Rotary encoder with digital readout in the workhead -Rotary encoder with digital readout in the grinding headstock (no height adjustment via spindle possible) -New sturdy internal grinding attachment with diameter 80mm or 100mm with height adjustment -Increase in centre height to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories available on request. The machine tool currently does not comply with the fundamental safety and protection requirements as described in the BetrSichV 2015. An increase in the required minimum level of protection is to be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, en-1 Gbedpfjd Ih D Rex Ah Rei

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m As a world leader in the field of Kellenberger overhauling/retrofit, we are not only able to deliver machines in new-machine quality and with warranty, but can also provide service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA round grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales on x and z axes - New absolute rotary encoder (for B axis) Standard equipment: - Tailstock with Morse taper MK5, optionally with MK5/short taper adapter - Steady rest with MK4 taper, optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding device belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing from ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - High-precision, highly tilt-resistant workpiece spindle stock - Measurement control - Extraction system - Paper band filter Gbodouwv H Tepfx Ah Rei Control: Grinding basic cycles: - Zero the workpiece with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Gsdpouxft Eofx Ah Rsbi Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal movement of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight, max. — between centres: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Required space approx.: 4.2 x 2.0 m Photo: Machine of identical construction shown with centre height 225 mm Version R: Machine equipped with central lubrication and roller guide in the flat way of the X-axis, as well as air lift-off in the grinding headstock. - Digital display on 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (height adjustment using spindle not possible) - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Speed control for grinding spindle Gedpfed Ih D Hsx Ah Rsbi Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine tool does not currently comply with the basic safety and protection requirements as outlined in the BetrSichV 2015. An assessment of the required minimum protection level must be determined by means of a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirements approx. 3.6/3.5 m Gbjdeuwv H Hjpfx Ah Roi As a world-leading company in the field of Kellenberger – Overhaul / Retrofit, we are not only able to deliver the machines in as-new condition with warranty, but can also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B-axis high resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP Control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - Ultra-precise, high-stiffness workpiece spindle head - Measuring control - Extraction unit - Paper band filter Control: Basic grinding cycles: - Zeroing workpiece with Z-Pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Diamond dresser measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. Godpfxod Ih D Eo Ah Rebi BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 +/- ° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. fixture Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your recently delivered machines with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Gbodsuxftxepfx Ah Rsi Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways on the X-axis flat slide as well as standard air lift on the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic health and safety requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. Gbedpfxjv I Eq Se Ah Rsi An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Gbodpfx Aevdk N Eeh Rji Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure Gbsdpfsuxfucox Ah Roi - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE Gedpfxet Ii Nbj Ah Rebi - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Swiveling workpiece headstock: 360° Swiveling grinding headstock: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Workpiece weight max.—mounted: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight (approx.): 2.5 t Space requirement (approx.): 4.2 x 2.0 m As a global leader in the field of Kellenberger overhauling / retrofit, we are able not only to deliver machines in like-new quality with warranty, but also provide service for your equipment. Geometrically overhauled and newly painted, with original electrics. The photo shows a 600U that was recently delivered. - Digital display on 2 axes. Resolution of X-axis: 0.5 μm Options: - Encoder with digital display on workpiece spindle headstock - Encoder with digital display on grinding spindle headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in center height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Gedpjt Ii Nujfx Ah Rebi Additional accessories available on request. At present, the machine tool does not comply with the fundamental safety and protection requirements as stipulated in BetrSichV 2015 (Industrial Safety Regulations 2015). The necessary minimum safety objectives must be determined by a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. Gbedpfx Ahouxfups Rei The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.